T104xD4RDB: Fix PHY address for PHY connected to FM1@DTSEC3

On T1040D4RDB board, u-boot fails to connect port FM1@DTSEC3 to
the Ethernet PHY because the wrong PHY address is used. Also,
T1040D4RDB supports SGMII on one port only.

Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>

diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index da2ccb831838deac3962a6915d47d379793a02c2..840be047cd96b7980b85396104a387f79f7c1aa1 100644 (file)
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -741,7 +741,9 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #ifdef CONFIG_FMAN_ENET
 #if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x03
-#elif defined(CONFIG_T1040D4RDB) || defined(CONFIG_T1042D4RDB)
+#elif defined(CONFIG_T1040D4RDB)
+#define CONFIG_SYS_SGMII1_PHY_ADDR             0x01
+#elif defined(CONFIG_T1042D4RDB)
 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x02
 #define CONFIG_SYS_SGMII2_PHY_ADDR             0x03
 #define CONFIG_SYS_SGMII3_PHY_ADDR             0x01