select BOARD_EARLY_INIT_F
select SYS_83XX_DDR_USES_CS0
-config TARGET_IDS8313
- bool "Support ids8313"
- select ARCH_MPC8313
- select DM
- imply CMD_DM
-
config TARGET_KMETER1
bool "Support kmeter1"
select VENDOR_KM
bool
source "board/freescale/mpc837xerdb/Kconfig"
-source "board/ids/ids8313/Kconfig"
source "board/gdsys/mpc8308/Kconfig"
endmenu
+++ /dev/null
-if TARGET_IDS8313
-
-config SYS_BOARD
- default "ids8313"
-
-config SYS_VENDOR
- default "ids"
-
-config SYS_CONFIG_NAME
- default "ids8313"
-
-endif
+++ /dev/null
-IDS8313 BOARD
-M: Heiko Schocher <hs@denx.de>
-S: Maintained
-F: board/ids/ids8313/
-F: include/configs/ids8313.h
-F: configs/ids8313_defconfig
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2013
-# Heiko Schocher, DENX Software Engineering, <hs@denx.de>
-
-obj-y = ids8313.o
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2013
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * Based on:
- * Copyright (c) 2011 IDS GmbH, Germany
- * ids8313.c - ids8313 board support.
- *
- * Sergej Stepanov <ste@ids.de>
- * Based on board/freescale/mpc8313erdb/mpc8313erdb.c
- */
-
-#include <common.h>
-#include <fdt_support.h>
-#include <init.h>
-#include <mpc83xx.h>
-#include <spi.h>
-#include <asm/bitops.h>
-#include <asm/global_data.h>
-#include <linux/delay.h>
-#include <linux/libfdt.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-/** CPLD contains the info about:
- * - board type: *pCpld & 0xF0
- * - hw-revision: *pCpld & 0x0F
- * - cpld-revision: *pCpld+1
- */
-int checkboard(void)
-{
- char *pcpld = (char *)CONFIG_SYS_CPLD_BASE;
- u8 u8Vers = readb(pcpld);
- u8 u8Revs = readb(pcpld + 1);
-
- printf("Board: ");
- switch (u8Vers & 0xF0) {
- case '\x40':
- printf("CU73X");
- break;
- case '\x50':
- printf("CC73X");
- break;
- default:
- printf("unknown(0x%02X, 0x%02X)\n", u8Vers, u8Revs);
- return 0;
- }
- printf("\nInfo: HW-Rev: %i, CPLD-Rev: %i\n",
- u8Vers & 0x0F, u8Revs & 0xFF);
- return 0;
-}
-
-/*
- * fixed sdram init
- */
-int fixed_sdram(unsigned long config)
-{
- immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- u32 msize = CONFIG_SYS_SDRAM_SIZE;
-
-#ifndef CONFIG_SYS_RAMBOOT
- u32 msize_log2 = __ilog2(msize);
-
- out_be32(&im->sysconf.ddrlaw[0].bar,
- (CONFIG_SYS_SDRAM_BASE & 0xfffff000));
- out_be32(&im->sysconf.ddrlaw[0].ar, LBLAWAR_EN | (msize_log2 - 1));
- out_be32(&im->sysconf.ddrcdr, CONFIG_SYS_DDRCDR_VALUE);
- sync();
-
- /*
- * Erratum DDR3 requires a 50ms delay after clearing DDRCDR[DDR_cfg],
- * or the DDR2 controller may fail to initialize correctly.
- */
- udelay(50000);
-
- out_be32(&im->ddr.csbnds[0].csbnds, (msize - 1) >> 24);
- out_be32(&im->ddr.cs_config[0], config);
-
- /* currently we use only one CS, so disable the other banks */
- out_be32(&im->ddr.cs_config[1], 0);
- out_be32(&im->ddr.cs_config[2], 0);
- out_be32(&im->ddr.cs_config[3], 0);
-
- out_be32(&im->ddr.timing_cfg_3, CONFIG_SYS_DDR_TIMING_3);
- out_be32(&im->ddr.timing_cfg_1, CONFIG_SYS_DDR_TIMING_1);
- out_be32(&im->ddr.timing_cfg_2, CONFIG_SYS_DDR_TIMING_2);
- out_be32(&im->ddr.timing_cfg_0, CONFIG_SYS_DDR_TIMING_0);
-
- out_be32(&im->ddr.sdram_cfg, CONFIG_SYS_SDRAM_CFG);
- out_be32(&im->ddr.sdram_cfg2, CONFIG_SYS_SDRAM_CFG2);
-
- out_be32(&im->ddr.sdram_mode, CONFIG_SYS_DDR_MODE);
- out_be32(&im->ddr.sdram_mode2, CONFIG_SYS_DDR_MODE_2);
-
- out_be32(&im->ddr.sdram_interval, CONFIG_SYS_DDR_INTERVAL);
- out_be32(&im->ddr.sdram_clk_cntl, CONFIG_SYS_DDR_CLK_CNTL);
- sync();
- udelay(300);
-
- /* enable DDR controller */
- setbits_be32(&im->ddr.sdram_cfg, SDRAM_CFG_MEM_EN);
- /* now check the real size */
- disable_addr_trans();
- msize = get_ram_size(CONFIG_SYS_SDRAM_BASE, msize);
- enable_addr_trans();
-#endif
- return msize;
-}
-
-static int setup_sdram(void)
-{
- u32 msize = CONFIG_SYS_SDRAM_SIZE;
- long int size_01, size_02;
-
- size_01 = fixed_sdram(CONFIG_SYS_DDR_CONFIG);
- size_02 = fixed_sdram(CONFIG_SYS_DDR_CONFIG_256);
-
- if (size_01 > size_02)
- msize = fixed_sdram(CONFIG_SYS_DDR_CONFIG);
- else
- msize = size_02;
-
- return msize;
-}
-
-int dram_init(void)
-{
- immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- fsl_lbc_t *lbc = &im->im_lbc;
- u32 msize = 0;
-
- if ((in_be32(&im->sysconf.immrbar) & IMMRBAR_BASE_ADDR) != (u32)im)
- return -ENXIO;
-
- msize = setup_sdram();
-
- out_be32(&lbc->lbcr, (0x00040000 | (0xFF << LBCR_BMT_SHIFT) | 0xF));
- out_be32(&lbc->mrtpr, 0x20000000);
- sync();
-
- gd->ram_size = msize;
-
- return 0;
-}
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-int ft_board_setup(void *blob, struct bd_info *bd)
-{
- ft_cpu_setup(blob, bd);
-
- return 0;
-}
-#endif
-
-/* gpio mask for spi_cs */
-#define IDSCPLD_SPI_CS_MASK 0x00000001
-/* spi_cs multiplexed through cpld */
-#define IDSCPLD_SPI_CS_BASE (CONFIG_SYS_CPLD_BASE + 0xf)
-
-#if defined(CONFIG_MISC_INIT_R)
-/* srp umcr mask for rts */
-#define IDSUMCR_RTS_MASK 0x04
-int misc_init_r(void)
-{
- /*srp*/
- duart83xx_t *uart1 = &((immap_t *)CONFIG_SYS_IMMR)->duart[0];
- duart83xx_t *uart2 = &((immap_t *)CONFIG_SYS_IMMR)->duart[1];
-
- gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
- u8 *spi_base = (u8 *)IDSCPLD_SPI_CS_BASE;
-
- /* deactivate spi_cs channels */
- out_8(spi_base, 0);
- /* deactivate the spi_cs */
- setbits_be32(&iopd->dir, IDSCPLD_SPI_CS_MASK);
- /*srp - deactivate rts*/
- out_8(&uart1->umcr, IDSUMCR_RTS_MASK);
- out_8(&uart2->umcr, IDSUMCR_RTS_MASK);
-
-
- gd->fdt_blob = (void *)CONFIG_SYS_FLASH_BASE;
- return 0;
-}
-#endif
-
-#ifdef CONFIG_MPC8XXX_SPI
-/*
- * The following are used to control the SPI chip selects
- */
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
- return bus == 0 && ((cs >= 0) && (cs <= 2));
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
- gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
- u8 *spi_base = (u8 *)IDSCPLD_SPI_CS_BASE;
-
- /* select the spi_cs channel */
- out_8(spi_base, 1 << slave->cs);
- /* activate the spi_cs */
- clrbits_be32(&iopd->dat, IDSCPLD_SPI_CS_MASK);
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
- gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
- u8 *spi_base = (u8 *)IDSCPLD_SPI_CS_BASE;
-
- /* select the spi_cs channel */
- out_8(spi_base, 1 << slave->cs);
- /* deactivate the spi_cs */
- setbits_be32(&iopd->dat, IDSCPLD_SPI_CS_MASK);
-}
-#endif
+++ /dev/null
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xFFF00000
-CONFIG_SYS_MALLOC_LEN=0x800000
-CONFIG_ENV_SIZE=0x20000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_SYS_BOOTCOUNT_ADDR=0x9
-CONFIG_SYS_CLK_FREQ=66000000
-CONFIG_SYS_LOAD_ADDR=0x100000
-CONFIG_ENV_ADDR=0xFFFC0000
-CONFIG_MPC83xx=y
-CONFIG_HIGH_BATS=y
-CONFIG_TARGET_IDS8313=y
-CONFIG_CORE_PLL_RATIO_2_1=y
-CONFIG_PCI_HOST_MODE_ENABLE=y
-CONFIG_BOOT_ROM_INTERFACE_GPCM_8BIT=y
-CONFIG_BAT0=y
-CONFIG_BAT0_NAME="SDRAM"
-CONFIG_BAT0_BASE=0x00000000
-CONFIG_BAT0_LENGTH_256_MBYTES=y
-CONFIG_BAT0_ACCESS_RW=y
-CONFIG_BAT0_USER_MODE_VALID=y
-CONFIG_BAT0_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT1=y
-CONFIG_BAT1_NAME="INITRAM"
-CONFIG_BAT1_BASE=0xFD000000
-CONFIG_BAT1_LENGTH_256_KBYTES=y
-CONFIG_BAT1_ACCESS_RW=y
-CONFIG_BAT1_ICACHE_GUARDED=y
-CONFIG_BAT1_DCACHE_GUARDED=y
-CONFIG_BAT1_USER_MODE_VALID=y
-CONFIG_BAT1_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT2=y
-CONFIG_BAT2_NAME="FLASH"
-CONFIG_BAT2_BASE=0xFF800000
-CONFIG_BAT2_LENGTH_8_MBYTES=y
-CONFIG_BAT2_ACCESS_RW=y
-CONFIG_BAT2_ICACHE_GUARDED=y
-CONFIG_BAT2_DCACHE_INHIBITED=y
-CONFIG_BAT2_DCACHE_GUARDED=y
-CONFIG_BAT2_USER_MODE_VALID=y
-CONFIG_BAT2_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT5=y
-CONFIG_BAT5_NAME="IMMR"
-CONFIG_BAT5_BASE=0xF0000000
-CONFIG_BAT5_LENGTH_128_MBYTES=y
-CONFIG_BAT5_ACCESS_RW=y
-CONFIG_BAT5_ICACHE_INHIBITED=y
-CONFIG_BAT5_ICACHE_GUARDED=y
-CONFIG_BAT5_DCACHE_INHIBITED=y
-CONFIG_BAT5_DCACHE_GUARDED=y
-CONFIG_BAT5_USER_MODE_VALID=y
-CONFIG_BAT5_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT6=y
-CONFIG_BAT6_NAME="NAND_MRAM_CPLD"
-CONFIG_BAT6_BASE=0xE0000000
-CONFIG_BAT6_LENGTH_256_MBYTES=y
-CONFIG_BAT6_ACCESS_RW=y
-CONFIG_BAT6_ICACHE_GUARDED=y
-CONFIG_BAT6_DCACHE_GUARDED=y
-CONFIG_BAT6_USER_MODE_VALID=y
-CONFIG_BAT6_SUPERVISOR_MODE_VALID=y
-CONFIG_NAND_LBLAWBAR_PRELIM_1=y
-CONFIG_LBLAW0=y
-CONFIG_LBLAW0_BASE=0xFF800000
-CONFIG_LBLAW0_NAME="FLASH"
-CONFIG_LBLAW0_LENGTH_8_MBYTES=y
-CONFIG_LBLAW1=y
-CONFIG_LBLAW1_BASE=0xE1000000
-CONFIG_LBLAW1_NAME="NAND"
-CONFIG_LBLAW1_LENGTH_32_KBYTES=y
-CONFIG_LBLAW2=y
-CONFIG_LBLAW2_BASE=0xE2000000
-CONFIG_LBLAW2_NAME="MRAM"
-CONFIG_LBLAW2_LENGTH_128_KBYTES=y
-CONFIG_LBLAW3=y
-CONFIG_LBLAW3_BASE=0xE3000000
-CONFIG_LBLAW3_NAME="CPLD"
-CONFIG_LBLAW3_LENGTH_32_KBYTES=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFF800000
-CONFIG_OR0_AM_8_MBYTES=y
-CONFIG_OR0_SCY_10=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="NAND"
-CONFIG_BR1_OR1_BASE=0xE1000000
-CONFIG_BR1_ERRORCHECKING_BOTH=y
-CONFIG_BR1_MACHINE_FCM=y
-CONFIG_OR1_SCY_4=y
-CONFIG_OR1_PGS_LARGE=y
-CONFIG_OR1_CSCT_8_CYCLE=y
-CONFIG_OR1_CST_ONE_CLOCK=y
-CONFIG_OR1_CHT_TWO_CLOCK=y
-CONFIG_OR1_RST_ONE_CLOCK=y
-CONFIG_OR1_TRLX_RELAXED=y
-CONFIG_OR1_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR2_OR2=y
-CONFIG_BR2_OR2_NAME="MRAM"
-CONFIG_BR2_OR2_BASE=0xE2000000
-CONFIG_OR2_AM_128_KBYTES=y
-CONFIG_OR2_SCY_7=y
-CONFIG_OR2_CSNT_EARLIER=y
-CONFIG_OR2_ACS_QUARTER_CYCLE_EARLIER=y
-CONFIG_OR2_TRLX_RELAXED=y
-CONFIG_ELBC_BR3_OR3=y
-CONFIG_BR3_OR3_NAME="CPLD"
-CONFIG_BR3_OR3_BASE=0xE3000000
-CONFIG_OR3_SCY_1=y
-CONFIG_OR3_CSNT_EARLIER=y
-CONFIG_OR3_TRLX_RELAXED=y
-CONFIG_HID0_FINAL_EMCP=y
-CONFIG_HID0_FINAL_ICE=y
-CONFIG_HID2_HBE=y
-CONFIG_ACR_PIPE_DEP_4=y
-CONFIG_ACR_RPTCNT_4=y
-CONFIG_LCRR_EADC_1=y
-CONFIG_LCRR_CLKDIV_2=y
-CONFIG_SYS_BARGSIZE=1024
-CONFIG_FIT=y
-CONFIG_FIT_SIGNATURE=y
-CONFIG_LEGACY_IMAGE_FORMAT=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=1
-CONFIG_AUTOBOOT_KEYED=y
-CONFIG_AUTOBOOT_PROMPT="Enter password - autoboot in %d seconds...\n"
-CONFIG_AUTOBOOT_DELAY_STR="ids"
-CONFIG_BOOT_RETRY=y
-CONFIG_BOOT_RETRY_TIME=900
-CONFIG_BOOT_RETRY_MIN=30
-CONFIG_RESET_TO_RETRY=y
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="run boot_cramfs"
-CONFIG_USE_PREBOOT=y
-CONFIG_PREBOOT="echo;echo Type \"run nfsboot\" to mount root filesystem over NFS;echo"
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_MISC_INIT_R=y
-CONFIG_HUSH_PARSER=y
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_CBSIZE=1024
-CONFIG_SYS_BOOTM_LEN=0x800000
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_ENV_FLAGS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_NAND_TRIMFFS=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_BOOTP_BOOTFILESIZE=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_SNTP=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_JFFS2=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nor0=ff800000.flash,nand0=e1000000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:7m(dum),768k(BOOT-BIN),128k(BOOT-ENV),128k(BOOT-REDENV);e1000000.flash:-(ubi)"
-CONFIG_CMD_UBI=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_ENV_ADDR_REDUND=0xFFFE0000
-CONFIG_USE_BOOTFILE=y
-CONFIG_BOOTFILE="ids8313/uImage"
-CONFIG_USE_ETHPRIME=y
-CONFIG_ETHPRIME="TSEC1"
-CONFIG_VERSION_VARIABLE=y
-CONFIG_BOOTCOUNT_LIMIT=y
-CONFIG_BOOTCOUNT_I2C=y
-CONFIG_SYS_BR0_PRELIM_BOOL=y
-CONFIG_SYS_BR0_PRELIM=0xFF800801
-CONFIG_SYS_OR0_PRELIM=0xFF8008A7
-CONFIG_SYS_BR1_PRELIM_BOOL=y
-CONFIG_SYS_BR1_PRELIM=0xE1000C21
-CONFIG_SYS_OR1_PRELIM=0xFFFF87CE
-CONFIG_SYS_BR2_PRELIM_BOOL=y
-CONFIG_SYS_BR2_PRELIM=0xE2000801
-CONFIG_SYS_OR2_PRELIM=0xFFFE0C74
-CONFIG_SYS_BR3_PRELIM_BOOL=y
-CONFIG_SYS_BR3_PRELIM=0xE3000801
-CONFIG_SYS_OR3_PRELIM=0xFFFF8814
-CONFIG_SYS_I2C_LEGACY=y
-CONFIG_SYS_I2C_FSL=y
-CONFIG_SYS_FSL_I2C_OFFSET=0x3100
-CONFIG_SYS_I2C_SLAVE=0x7F
-CONFIG_SYS_I2C_SPEED=400000
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SYS_MAX_FLASH_SECT=128
-CONFIG_MTD_RAW_NAND=y
-CONFIG_NAND_FSL_ELBC=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-# CONFIG_PCI is not set
-CONFIG_RTC_PCF8563=y
-CONFIG_SYS_NS16550=y
-CONFIG_WATCHDOG=y
-CONFIG_JFFS2_NAND=y
-CONFIG_OF_LIBFDT=y
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2013
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * Based on:
- * Copyright (c) 2011 IDS GmbH, Germany
- * Sergej Stepanov <ste@ids.de>
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <linux/stringify.h>
-
-/*
- * High Level Configuration Options
- */
-
-#define CONFIG_SYS_SICRH 0x00000000
-#define CONFIG_SYS_SICRL (SICRL_LBC | SICRL_SPI_D)
-
-#define CONFIG_HWCONFIG
-
-/*
- * Definitions for initial stack pointer and data area (in DCACHE )
- */
-#define CONFIG_SYS_INIT_RAM_LOCK
-#define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* End of used area in DPRAM */
-
-/*
- * Internal Definitions
- */
-/*
- * DDR Setup
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-
-/*
- * Manually set up DDR parameters,
- * as this board has not the SPD connected to I2C.
- */
-#define CONFIG_SYS_SDRAM_SIZE 0x10000000 /* 256 MiB */
-#define CONFIG_SYS_DDR_CONFIG (CSCONFIG_EN |\
- 0x00010000 |\
- CSCONFIG_ROW_BIT_13 |\
- CSCONFIG_COL_BIT_10)
-
-#define CONFIG_SYS_DDR_CONFIG_256 (CONFIG_SYS_DDR_CONFIG | \
- CSCONFIG_BANK_BIT_3)
-
-#define CONFIG_SYS_DDR_TIMING_3 (1 << 16) /* ext refrec */
-#define CONFIG_SYS_DDR_TIMING_0 ((3 << TIMING_CFG0_RWT_SHIFT) |\
- (3 << TIMING_CFG0_WRT_SHIFT) |\
- (3 << TIMING_CFG0_RRT_SHIFT) |\
- (3 << TIMING_CFG0_WWT_SHIFT) |\
- (6 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) |\
- (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) |\
- (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \
- (2 << TIMING_CFG0_MRS_CYC_SHIFT))
-#define CONFIG_SYS_DDR_TIMING_1 ((4 << TIMING_CFG1_PRETOACT_SHIFT) |\
- (12 << TIMING_CFG1_ACTTOPRE_SHIFT) |\
- (4 << TIMING_CFG1_ACTTORW_SHIFT) |\
- (7 << TIMING_CFG1_CASLAT_SHIFT) |\
- (4 << TIMING_CFG1_REFREC_SHIFT) |\
- (4 << TIMING_CFG1_WRREC_SHIFT) |\
- (2 << TIMING_CFG1_ACTTOACT_SHIFT) |\
- (2 << TIMING_CFG1_WRTORD_SHIFT))
-#define CONFIG_SYS_DDR_TIMING_2 ((1 << TIMING_CFG2_ADD_LAT_SHIFT) |\
- (5 << TIMING_CFG2_CPO_SHIFT) |\
- (4 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) |\
- (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) |\
- (0 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) |\
- (1 << TIMING_CFG2_CKE_PLS_SHIFT) |\
- (6 << TIMING_CFG2_FOUR_ACT_SHIFT))
-
-#define CONFIG_SYS_DDR_INTERVAL ((0x800 << SDRAM_INTERVAL_REFINT_SHIFT) |\
- (0x800 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
-
-#define CONFIG_SYS_SDRAM_CFG (SDRAM_CFG_SREN |\
- SDRAM_CFG_2T_EN | SDRAM_CFG_HSE |\
- SDRAM_CFG_DBW_32 |\
- SDRAM_CFG_SDRAM_TYPE_DDR2)
-
-#define CONFIG_SYS_SDRAM_CFG2 0x00401000
-#define CONFIG_SYS_DDR_MODE ((0x0448 << SDRAM_MODE_ESD_SHIFT) |\
- (0x0242 << SDRAM_MODE_SD_SHIFT))
-#define CONFIG_SYS_DDR_MODE_2 0x00000000
-#define CONFIG_SYS_DDR_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075
-#define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN |\
- DDRCDR_PZ_NOMZ |\
- DDRCDR_NZ_NOMZ |\
- DDRCDR_ODT |\
- DDRCDR_M_ODR |\
- DDRCDR_Q_DRN)
-
-/*
- * on-board devices
- */
-#define CONFIG_TSEC1
-#define CONFIG_TSEC2
-
-/*
- * NOR FLASH setup
- */
-#define CONFIG_FLASH_SHOW_PROGRESS 50
-
-#define CONFIG_SYS_FLASH_BASE 0xFF800000
-#define CONFIG_SYS_FLASH_SIZE 8
-
-/*
- * NAND FLASH setup
- */
-#define CONFIG_SYS_NAND_BASE 0xE1000000
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define NAND_CACHE_PAGES 64
-
-
-/*
- * MRAM setup
- */
-#define CONFIG_SYS_MRAM_BASE 0xE2000000
-#define CONFIG_SYS_MRAM_SIZE 0x20000 /* 128 Kb */
-
-/*
- * CPLD setup
- */
-#define CONFIG_SYS_CPLD_BASE 0xE3000000
-
-/*
- * HW-Watchdog
- */
-#define CONFIG_SYS_WATCHDOG_VALUE 0xFFFF
-
-/*
- * I2C setup
- */
-#define CONFIG_SYS_I2C_RTC_ADDR 0x51
-
-/*
- * Ethernet setup
- */
-#ifdef CONFIG_TSEC1
-#define CONFIG_TSEC1_NAME "TSEC0"
-#define CONFIG_SYS_TSEC1_OFFSET 0x24000
-#define TSEC1_PHY_ADDR 0x1
-#define TSEC1_FLAGS TSEC_GIGABIT
-#define TSEC1_PHYIDX 0
-#endif
-
-#ifdef CONFIG_TSEC2
-#define CONFIG_TSEC2_NAME "TSEC1"
-#define TSEC2_PHY_ADDR 0x3
-#define TSEC2_FLAGS TSEC_GIGABIT
-#define TSEC2_PHYIDX 0
-#endif
-
-/*
- * Serial Port
- */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-
-#define CONFIG_SYS_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600)
-#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0))
-
-#define CONFIG_SYS_SCCR_USBDRCM 3
-
-/*
- * U-Boot environment setup
- */
-
-/*
- * The reserved memory
- */
-#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
-
-/*
- * Environment Configuration
- */
-
-#define CONFIG_NETDEV eth1
-#define CONFIG_HOSTNAME "ids8313"
-#define CONFIG_ROOTPATH "/opt/eldk-4.2/ppc_6xx"
-#define CONFIG_UBOOTPATH "ids8313/u-boot.bin"
-#define CONFIG_FDTFILE "ids8313/ids8313.dtb"
-#define CONFIG_ENV_FLAGS_LIST_STATIC "ethaddr:mo,eth1addr:mo"
-
-/* Initial Memory map for Linux*/
-#define CONFIG_SYS_BOOTMAPSZ (256 << 20)
-
-/*
- * Miscellaneous configurable options
- */
-
-#define CONFIG_LOADS_ECHO
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE
-
-/* mtdparts command line support */
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=" __stringify(CONFIG_NETDEV) "\0" \
- "ethprime=TSEC1\0" \
- "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
- "tftpflash=tftpboot ${loadaddr} ${uboot}; " \
- "protect off " __stringify(CONFIG_SYS_TEXT_BASE) \
- " +${filesize}; " \
- "erase " __stringify(CONFIG_SYS_TEXT_BASE) \
- " +${filesize}; " \
- "cp.b ${loadaddr} " __stringify(CONFIG_SYS_TEXT_BASE) \
- " ${filesize}; " \
- "protect on " __stringify(CONFIG_SYS_TEXT_BASE) \
- " +${filesize}; " \
- "cmp.b ${loadaddr} " __stringify(CONFIG_SYS_TEXT_BASE) \
- " ${filesize}\0" \
- "console=ttyS0\0" \
- "fdtaddr=0x780000\0" \
- "kernel_addr=ff800000\0" \
- "fdtfile=" __stringify(CONFIG_FDTFILE) "\0" \
- "setbootargs=setenv bootargs " \
- "root=${rootdev} rw console=${console}," \
- "${baudrate} ${othbootargs}\0" \
- "setipargs=setenv bootargs root=${rootdev} rw " \
- "nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:" \
- "${netmask}:${hostname}:${netdev}:off " \
- "console=${console},${baudrate} ${othbootargs}\0" \
- "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
- "\0"
-
-/* UBI Support */
-
-#endif /* __CONFIG_H */
projects / u-boot.git / commitdiff
