sunxi: axp221: correct ALDO2 description for sun6i

ALDO2 is used to power LPDDR2 SDRAM on both the reference design and the
Hummingbird A31, when this type of RAM is present.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index ef0c09370e9be9159b4602327e33902348d2b731..e68e16b3211757271a27e99d0089fbf4b29fc83f 100644 (file)
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -46,14 +46,14 @@ config AXP221_ALDO1_VOLT
 config AXP221_ALDO2_VOLT
        int "axp221 aldo2 voltage"
        depends on AXP221_POWER
-       default 1800 if MACH_SUN6I
+       default 0 if MACH_SUN6I
        default 2500 if MACH_SUN8I
        ---help---
        Set the voltage (mV) to program the axp221 aldo2 at, set to 0 to
-       disable aldo2. On sun6i (A31) boards this is typically connected to
-       VCC-PM, which powers the port M gpios, and should be set to 1.8V.
-       On sun8i (A23) this is typically connected to VDD-DLL and must be
-       set to 2.5V.
+       disable aldo2. On sun6i (A31) boards this is typically unused and
+       should be disabled, if it is used for LPDDR2 it should be set to 1.8V.
+       On sun8i (A23) this is typically connected to VDD-DLL and must be set
+       to 2.5V.
 
 config AXP221_ALDO3_VOLT
        int "axp221 aldo3 voltage"