armv8: psci: add ARMV8_PSCI_RELOCATE Kconfig option

There is an user-selectable SYS_HAS_ARMV8_SECURE_BASE, which has the
same meaning but is just for the ls1043ardb board. As no in-tree config
uses this, drop it and replace it with something more sophiticated:
ARMV8_PSCI_RELOCATE. This option will then enable the ARMV8_SECURE_BASE
option which is used as the base to relocate the PSCI code (or any code
in the secure region, but that is only PSCI). A SoC (or board) can now
opt-in into having such a secure region by enabling
SYS_HAS_ARMV8_SECURE_BASE. Enable it for the LS1043A SoC, where it was
possible to relocate the PSCI code before as well as on the LS1028A SoC
where there will be PSCI support soon.

Additionally, make ARMV8_PSCI and SEC_FIRMWARE_ARMV8_PSCI exclusive.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>

diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig
index 4d4469c88439d1a4a53d11f4c9a7212d625f3c76..09f3f50fa22f34fe42b9500cd13a8f076f88fbc7 100644 (file)
--- a/arch/arm/cpu/armv8/Kconfig
+++ b/arch/arm/cpu/armv8/Kconfig
@@ -90,6 +90,7 @@ config SPL_RECOVER_DATA_SECTION
 config SEC_FIRMWARE_ARMV8_PSCI
        bool "PSCI implementation in secure monitor firmware"
        depends on ARMV8_SEC_FIRMWARE_SUPPORT || SPL_ARMV8_SEC_FIRMWARE_SUPPORT
+       depends on ARMV8_PSCI=n
        help
          This config enables the ARMv8 PSCI implementation in secure monitor
          firmware. This is a private PSCI implementation and different from
@@ -131,6 +132,9 @@ config PSCI_RESET
 
          Select Y here to make use of PSCI calls for system reset
 
+config SYS_HAS_ARMV8_SECURE_BASE
+       bool
+
 config ARMV8_PSCI
        bool "Enable PSCI support" if EXPERT
        help
@@ -158,23 +162,27 @@ config ARMV8_PSCI_CPUS_PER_CLUSTER
          A value 0 or no definition of it works for single cluster system.
          System with multi-cluster should difine their own exact value.
 
-config ARMV8_EA_EL3_FIRST
-       bool "External aborts and SError interrupt exception are taken in EL3"
+config ARMV8_PSCI_RELOCATE
+       bool "Relocate PSCI code"
+       depends on ARMV8_PSCI
+       depends on SYS_HAS_ARMV8_SECURE_BASE
        help
-         Exception handling at all exception levels for External Abort and
-         SError interrupt exception are taken in EL3.
-
-if SYS_HAS_ARMV8_SECURE_BASE
+         Relocate PSCI code, for example to a secure memory on the SoC. If not
+         set, the PSCI sections are placed together with the u-boot and the
+         regions will be marked as reserved before linux is started.
 
 config ARMV8_SECURE_BASE
        hex "Secure address for PSCI image"
-       depends on ARMV8_PSCI
+       depends on ARMV8_PSCI_RELOCATE
+       default 0x18000000 if ARCH_LS1028A
        help
          Address for placing the PSCI text, data and stack sections.
-         If not defined, the PSCI sections are placed together with the u-boot
-         but platform can choose to place PSCI code image separately in other
-         places such as some secure RAM built-in SOC etc.
 
-endif
+
+config ARMV8_EA_EL3_FIRST
+       bool "External aborts and SError interrupt exception are taken in EL3"
+       help
+         Exception handling at all exception levels for External Abort and
+         SError interrupt exception are taken in EL3.
 
 endif

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index 6f8d5cb72fd12001c4427501584eb7f6e4bba447..80a1642447d60c8fd46a785b451cc8da720666c4 100644 (file)
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -55,6 +55,7 @@ config ARCH_LS1028A
        select SYS_FSL_ERRATUM_A011334
        select SYS_FSL_ESDHC_UNRELIABLE_PULSE_DETECTION_WORKAROUND
        select RESV_RAM if GIC_V3_ITS
+       select SYS_HAS_ARMV8_SECURE_BASE
        imply PANIC_HANG
 
 config ARCH_LS1043A
@@ -90,6 +91,7 @@ config ARCH_LS1043A
        select SYS_I2C_MXC_I2C2 if !DM_I2C
        select SYS_I2C_MXC_I2C3 if !DM_I2C
        select SYS_I2C_MXC_I2C4 if !DM_I2C
+       select SYS_HAS_ARMV8_SECURE_BASE
        imply CMD_PCI
        imply ID_EEPROM
 

diff --git a/board/freescale/ls1043ardb/Kconfig b/board/freescale/ls1043ardb/Kconfig
index 778b8d8d5a5a1048d175df4e3df968a5d2d9a53c..d66c7804b13e8ce80c8cc5b3df9c54f5b9191ec1 100644 (file)
--- a/board/freescale/ls1043ardb/Kconfig
+++ b/board/freescale/ls1043ardb/Kconfig
@@ -13,14 +13,6 @@ config SYS_SOC
 config SYS_CONFIG_NAME
        default "ls1043ardb"
 
-config SYS_HAS_ARMV8_SECURE_BASE
-       bool "Enable secure address for PSCI image"
-       depends on ARMV8_PSCI
-       help
-         PSCI image can be re-located to secure RAM.
-         If enabled, please also define the value for ARMV8_SECURE_BASE,
-         for LS1043ARDB, it could be some address in OCRAM.
-
 if FSL_LS_PPA
 config SYS_LS_PPA_FW_ADDR
        hex "PPA Firmware Addr"