arm: mvebu: Power up 2nd SATA port for Thecus N2350

Currently, only the 1st SATA port is powered up (by GPIO1 12).
Add GPIO1 13 in board initialization to power up the 2nd SATA port.

Note that this patch depends on the initial add-support patch:
https://patchwork.ozlabs.org/project/uboot/patch/20230201231306.7010-1-mibodhi@gmail.com/

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>

diff --git a/board/thecus/n2350/n2350.c b/board/thecus/n2350/n2350.c
index 4cfdfba66286752e94a8718d74fe846efca7f292..fd8f95f9446ed4f56006f2d262d8ead6261ff903 100644 (file)
--- a/board/thecus/n2350/n2350.c
+++ b/board/thecus/n2350/n2350.c
@@ -24,8 +24,8 @@ DECLARE_GLOBAL_DATA_PTR;
 
 #define N2350_GPP_OUT_ENA_LOW  (~(BIT(20) | BIT(21) | BIT(24)))
 #define N2350_GPP_OUT_ENA_MID  (~(BIT(12) | BIT(13) | BIT(16) | BIT(19) | BIT(22)))
-#define N2350_GPP_OUT_VAL_LOW  0x1200000
-#define N2350_GPP_OUT_VAL_MID  0x1001
+#define N2350_GPP_OUT_VAL_LOW  (BIT(21) | BIT(24))
+#define N2350_GPP_OUT_VAL_MID  (BIT(0) | BIT(12) | BIT(13))
 #define N2350_GPP_POL_LOW      0x0
 #define N2350_GPP_POL_MID      0x0