configuration from the BOOTP server, but not try to
load any image using TFTP
- autoscript - if set to "yes" commands like "loadb", "loady",
- "bootp", "tftpb", "rarpboot" and "nfs" will attempt
- to automatically run script images (by internally
- calling "source").
-
- autoscript_uname - if script image is in a format (FIT) this
- variable is used to get script subimage unit name.
-
autostart - if set to "yes", an image loaded using the "bootp",
"rarpboot", "tftpboot" or "diskboot" commands will
be automatically started (by internally calling
Hit any key to stop autoboot: 0
LEOX_elpt860: help
askenv - get environment variables from stdin
-autoscr - run script from memory
base - print or set address offset
bdinfo - print Board Info structure
bootm - boot application image from memory
saveenv - save environment variables to persistent storage
setenv - set environment variables
sleep - delay execution for some time
+source - run script from memory
tftpboot- boot image via network using TFTP protocol
and env variables ipaddr and serverip
version - print monitor version
then
setenv addprofile setenv bootargs \${bootargs} profile=\${profile}
fi
-if test ${autoscr_boot} != no;
+if test ${autoscript_boot} != no;
then
if test ${netboot} = yes;
then
echo "=== bootfromflash ==="
run cpdtb rundtb bootfromflash
else
- echo "=== boot stopped with autoscr_boot no ==="
+ echo "=== boot stopped with autoscript_boot no ==="
fi
setenv set_static_gw setenv gatewayip \${static_gateway}
setenv set_ip setenv ip \${ipaddr}::\${gatewayip}:\${netmask}
setenv ramparam setenv bootargs root=/dev/ram0 ro rootfstype=squashfs
-if test ${autoscr_boot} != no;
+if test ${autoscript_boot} != no;
then
if test ${netboot} = yes;
then
echo "=== bootfromflash ==="
run cpdtb rundtb bootfromflash
else
- echo "=== boot stopped with autoscr_boot no ==="
+ echo "=== boot stopped with autoscript_boot no ==="
fi
Err: serial
Hit any key to stop autoboot: 0
=> help
-autoscr - run script from memory
base - print or set address offset
bdinfo - print Board Info structure
bootm - boot application image from memory
run - run commands in an environment variable
saveenv - save environment variables to persistent storage
setenv - set environment variables
+source - run script from memory
tftpboot- boot image via network using TFTP protocol
and env variables ipaddr and serverip
version - print monitor version
rcode = do_bootm (cmdtp, 0, 1, local_args);
}
-#ifdef CONFIG_SOURCE
- if (load_addr) {
- char *s;
-
- if (((s = getenv("autoscript")) != NULL) && (strcmp(s,"yes") == 0)) {
- printf ("Running \"source\" command at addr 0x%08lX",
- load_addr);
-
- s = getenv ("autoscript_uname");
- if (s)
- printf (":%s ...\n", s);
- else
- puts (" ...\n");
-
- rcode = source (load_addr, s);
- }
- }
-#endif
return rcode;
}
}
}
-#ifdef CONFIG_SOURCE
- if (load_addr) {
- char *s;
-
- if (((s = getenv("autoscript")) != NULL) && (strcmp(s,"yes") == 0)) {
- printf ("Running \"source\" command at addr 0x%08lX",
- load_addr);
-
- s = getenv ("autoscript_uname");
- if (s)
- printf (":%s ...\n", s);
- else
- puts (" ...\n");
-
- rcode = source (load_addr, s);
- }
- }
-#endif
return rcode;
}
rcode = do_bootm (cmdtp, 0, 1, local_args);
}
-#ifdef CONFIG_SOURCE
- if (((s = getenv("autoscript")) != NULL) && (strcmp(s,"yes") == 0)) {
- printf ("Running \"source\" command at addr 0x%08lX",
- load_addr);
-
- s = getenv ("autoscript_uname");
- if (s)
- printf (":%s ...\n", s);
- else
- puts (" ...\n");
-
- show_boot_progress (83);
- rcode = source (load_addr, s);
- }
-#endif
if (rcode < 0)
show_boot_progress (-83);
else
"unit name in the form of addr:<subimg_uname>"
#endif
);
-
-/*
- * Keep for now for backward compatibility;
- * remove later when support for "autoscr" goes away.
- */
-static int
-do_autoscr (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
- printf ("\n### WARNING ### "
- "\"autoscr\" is deprecated, use \"source\" instead ###\n\n");
- return do_source (cmdtp, flag, argc, argv);
-}
-
-U_BOOT_CMD(
- autoscr, 2, 0, do_autoscr,
- "DEPRECATED - use \"source\" command instead",
- ""
-);
#endif
------------------------------------------------------------------------------
=> help
-autoscr - run script from memory
base - print or set address offset
bdinfo - print Board Info structure
bootm - boot application image from memory
saveenv - save environment variables to persistent storage
setenv - set environment variables
sleep - delay execution for some time
+source - run script from memory
tftpboot- boot image via network using TFTP protocol
and env variables ipaddr and serverip
version - print monitor version
->
-> help
? - alias for 'help'
-autoscr - run script from memory
base - print or set address offset
bdinfo - print Board Info structure
boot - boot default, i.e., run 'bootcmd'
saveenv - save environment variables to persistent storage
setenv - set environment variables
sleep - delay execution for some time
+source - run script from memory
version - print monitor version
->
->
-> help
? - alias for 'help'
-autoscr - run script from memory
base - print or set address offset
bdinfo - print Board Info structure
boot - boot default, i.e., run 'bootcmd'
saveenv - save environment variables to persistent storage
setenv - set environment variables
sleep - delay execution for some time
+source - run script from memory
tftpboot- boot image via network using TFTP protocol
version - print monitor version
-> tftp 0x40800000 uImage
->
-> help
? - alias for 'help'
-autoscr - run script from memory
base - print or set address offset
bdinfo - print Board Info structure
boot - boot default, i.e., run 'bootcmd'
saveenv - save environment variables to persistent storage
setenv - set environment variables
sleep - delay execution for some time
+source - run script from memory
tftpboot- boot image via network using TFTP protocol
version - print monitor version
->bootm 4000000
baudrate = 115200 bps
-> ?
? - alias for 'help'
-autoscr - run script from memory
base - print or set address offset
bdinfo - print Board Info structure
boot - boot default, i.e., run 'bootcmd'
saveenv - save environment variables to persistent storage
setenv - set environment variables
sleep - delay execution for some time
+source - run script from memory
tftpboot- boot image via network using TFTP protocol
usb - USB sub-system
usbboot - boot from USB device
---------------------------
-What: "autoscr" command
-When: Release 2009-09
-
-Why: "autosrc" is an ugly and completely non-standard name.
- The "autoscr" command is deprecated and will be replaced by
-
- the "source" command as used by other shells such as bash.
-
- Starting with March 2009, both commands will be supported for
- a transition period of 6 months after which "autoscr" will be
- removed. During the transition period existing scripts and
- environment variable names remain untouched for maximum
- compatibiltiy; thse will be changed when support for the
- "autoscr" command get's finally dropped.
-
-Who: Peter Tyser <ptyser@xes-inc.com>
-
----------------------------
-
What: GPL cleanup
When: August 2009
Why: Over time, a couple of files have sneaked in into the U-Boot
#define MV_INITRD_LENGTH 0x00400000
#define MV_SCRATCH_ADDR 0x00000000
#define MV_SCRATCH_LENGTH MV_INITRD_LENGTH
-#define MV_SOURCE_ADDR 0xff840000
-#define MV_SOURCE_ADDR2 0xff850000
+#define MV_SCRIPT_ADDR 0xff840000
+#define MV_SCRIPT_ADDR2 0xff850000
#define MV_DTB_ADDR 0xfffc0000
#define CONFIG_SHOW_BOOT_PROGRESS 1
#define CONFIG_ZERO_BOOTDELAY_CHECK
#define CONFIG_RESET_TO_RETRY 1000
-#define CONFIG_BOOTCOMMAND "if imi ${autoscr_addr}; \
- then source ${autoscr_addr}; \
- else source ${autoscr_addr2}; \
+#define CONFIG_BOOTCOMMAND "if imi ${script_addr}; \
+ then source ${script_addr}; \
+ else source ${script_addr2}; \
fi;"
#define CONFIG_BOOTARGS "root=/dev/ram ro rootfstype=squashfs"
"fpga=0\0" \
"fpgadata=" MK_STR(MV_FPGA_DATA) "\0" \
"fpgadatasize=" MK_STR(MV_FPGA_SIZE) "\0" \
- "autoscr_addr=" MK_STR(MV_SOURCE_ADDR) "\0" \
- "autoscr_addr2=" MK_STR(MV_SOURCE_ADDR2) "\0" \
+ "script_addr=" MK_STR(MV_SCRIPT_ADDR) "\0" \
+ "script_addr2=" MK_STR(MV_SCRIPT_ADDR2) "\0" \
"mv_kernel_addr=" MK_STR(MV_KERNEL_ADDR) "\0" \
"mv_kernel_addr_ram=" MK_STR(MV_KERNEL_ADDR_RAM) "\0" \
"mv_initrd_addr=" MK_STR(MV_INITRD_ADDR) "\0" \
#define MV_FPGA_SIZE 0
#define MV_KERNEL_ADDR 0xff810000
#define MV_INITRD_ADDR 0xffb00000
-#define MV_SOURCE_ADDR 0xff804000
-#define MV_SOURCE_ADDR2 0xff806000
+#define MV_SCRIPT_ADDR 0xff804000
+#define MV_SCRIPT_ADDR2 0xff806000
#define MV_DTB_ADDR 0xff808000
#define MV_INITRD_LENGTH 0x00400000
#define MV_DTB_ADDR_RAM 0x00600000
#define MV_INITRD_ADDR_RAM 0x01000000
-#define CONFIG_BOOTCOMMAND "if imi ${autoscr_addr}; \
- then source ${autoscr_addr}; \
- else source ${autoscr_addr2}; \
+#define CONFIG_BOOTCOMMAND "if imi ${script_addr}; \
+ then source ${script_addr}; \
+ else source ${script_addr2}; \
fi;"
#define CONFIG_BOOTARGS "root=/dev/ram ro rootfstype=squashfs"
"fpga=0\0" \
"fpgadata=" MK_STR(MV_FPGA_DATA) "\0" \
"fpgadatasize=" MK_STR(MV_FPGA_SIZE) "\0" \
- "autoscr_addr=" MK_STR(MV_SOURCE_ADDR) "\0" \
- "autoscr_addr2=" MK_STR(MV_SOURCE_ADDR2) "\0" \
+ "script_addr=" MK_STR(MV_SCRIPT_ADDR) "\0" \
+ "script_addr2=" MK_STR(MV_SCRIPT_ADDR2) "\0" \
"mv_kernel_addr=" MK_STR(MV_KERNEL_ADDR) "\0" \
"mv_kernel_addr_ram=" MK_STR(MV_KERNEL_ADDR_RAM) "\0" \
"mv_initrd_addr=" MK_STR(MV_INITRD_ADDR) "\0" \
"kernel_addr_r=200000\0" \
"fdt_addr_r=600000\0" \
"ram_ws=800000 \0" \
- "autoscr_ws=780000 \0" \
+ "script_ws=780000 \0" \
"fdt_file=" xstr(CONFIG_HOSTNAME) "/" \
xstr(CONFIG_HOSTNAME) ".dtb\0" \
"u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin \0" \
"set_new_esw_script=setenv new_esw_script " \
"new_esw_0x${IVM_BoardId}_0x${IVM_HWKey}.scr \0" \
"new_esw=run set_new_esw_script; " \
- "tftp ${autoscr_ws} ${new_esw_script}; " \
- "iminfo ${autoscr_ws}; source ${autoscr_ws} \0" \
+ "tftp ${script_ws} ${new_esw_script}; " \
+ "iminfo ${script_ws}; source ${script_ws} \0" \
"bootlimit=0 \0" \
CONFIG_KM_DEF_ENV_IOMUX \
CONFIG_KM_DEF_ENV_PRIVATE \
projects / u-boot.git / commitdiff
