power: rk8xx: properly print all supported PMICs name

The ID of the PMIC is stored in the 2 16b registers but the only part
that matters right now is the 3 MSB, which make the 3 digits (in hex) of
the part number.

Right now, only RK808 was properly displayed, with this all currently
supported PMICs should display the proper part number.

Additionally, when the PMIC variant is not found, print that value
instead of the masked unshifted value as all PMICs we support for now
have their LSB ignored to represent the actual part number.

Tested on RK806 (RK3588 Jaguar), RK808 (RK3399 Puma) and RK809 (PX30
Ringneck).

Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>

diff --git a/drivers/power/pmic/rk8xx.c b/drivers/power/pmic/rk8xx.c
index 12ff26a08558e7e2dc5bfb9bbc387ccd1dd8339b..617bb511e4e050d64a41ba9871d84b039d9de0f5 100644 (file)
--- a/drivers/power/pmic/rk8xx.c
+++ b/drivers/power/pmic/rk8xx.c
@@ -6,6 +6,7 @@
 
 #include <dm.h>
 #include <dm/lists.h>
+#include <bitfield.h>
 #include <errno.h>
 #include <log.h>
 #include <linux/bitfield.h>
@@ -277,10 +278,9 @@ static int rk8xx_probe(struct udevice *dev)
                return ret;
 
        priv->variant = ((msb << 8) | lsb) & RK8XX_ID_MSK;
-       show_variant = priv->variant;
+       show_variant = bitfield_extract_by_mask(priv->variant, RK8XX_ID_MSK);
        switch (priv->variant) {
        case RK808_ID:
-               show_variant = 0x808;   /* RK808 hardware ID is 0 */
                break;
        case RK805_ID:
        case RK816_ID:
@@ -311,7 +311,7 @@ static int rk8xx_probe(struct udevice *dev)
                init_data_num = ARRAY_SIZE(rk806_init_reg);
                break;
        default:
-               printf("Unknown PMIC: RK%x!!\n", priv->variant);
+               printf("Unknown PMIC: RK%x!!\n", show_variant);
                return -EINVAL;
        }