SPI_TCR_XCH,
SPI_TCR_CS_MANUAL,
SPI_TCR_CS_LEVEL,
+ SPI_TCR_SDC,
+ SPI_TCR_SDM,
SPI_FCR_TF_RST,
SPI_FCR_RF_RST,
SPI_FSR_RF_CNT_MASK,
u32 fifo_depth;
bool has_soft_reset;
bool has_burst_ctl;
+ bool has_clk_ctl;
};
struct sun4i_spi_plat {
setbits_le32(SPI_REG(priv, SPI_TCR), SPI_BIT(priv, SPI_TCR_CS_MANUAL) |
SPI_BIT(priv, SPI_TCR_CS_ACTIVE_LOW));
- sun4i_spi_set_speed_mode(dev->parent);
+ if (priv->variant->has_clk_ctl) {
+ sun4i_spi_set_speed_mode(dev->parent);
+ } else {
+ /*
+ * At this moment there is no ability to change input clock.
+ * Therefore, we can only use default HOSC@24MHz clock and
+ * set SPI sampling mode to normal
+ */
+ clrsetbits_le32(SPI_REG(priv, SPI_TCR),
+ SPI_BIT(priv, SPI_TCR_SDC) |
+ SPI_BIT(priv, SPI_TCR_SDM),
+ SPI_BIT(priv, SPI_TCR_SDM));
+ }
return 0;
}
[SPI_TCR_CS_MASK] = 0x30,
[SPI_TCR_CS_MANUAL] = BIT(6),
[SPI_TCR_CS_LEVEL] = BIT(7),
+ [SPI_TCR_SDC] = BIT(11),
+ [SPI_TCR_SDM] = BIT(13),
[SPI_TCR_XCH] = BIT(31),
[SPI_FCR_RF_RST] = BIT(15),
[SPI_FCR_TF_RST] = BIT(31),
.regs = sun4i_spi_regs,
.bits = sun4i_spi_bits,
.fifo_depth = 64,
+ .has_clk_ctl = true,
};
static const struct sun4i_spi_variant sun6i_a31_spi_variant = {
.fifo_depth = 128,
.has_soft_reset = true,
.has_burst_ctl = true,
+ .has_clk_ctl = true,
};
static const struct sun4i_spi_variant sun8i_h3_spi_variant = {
.fifo_depth = 64,
.has_soft_reset = true,
.has_burst_ctl = true,
+ .has_clk_ctl = true,
+};
+
+static const struct sun4i_spi_variant sun50i_r329_spi_variant = {
+ .regs = sun6i_spi_regs,
+ .bits = sun6i_spi_bits,
+ .fifo_depth = 64,
+ .has_soft_reset = true,
+ .has_burst_ctl = true,
};
static const struct udevice_id sun4i_spi_ids[] = {
.compatible = "allwinner,sun8i-h3-spi",
.data = (ulong)&sun8i_h3_spi_variant,
},
+ {
+ .compatible = "allwinner,sun50i-r329-spi",
+ .data = (ulong)&sun50i_r329_spi_variant,
+ },
{ /* sentinel */ }
};