pci: Add standard PCI Config Address macros

Lot of PCI and PCIe controllers are using standard Config Address for PCI
Configuration Mechanism #1 or its extended version.

So add PCI_CONF1_ADDRESS() and PCI_CONF1_EXT_ADDRESS() macros into U-Boot's
pci.h header file which can be suitable for most PCI and PCIe controller
drivers. Drivers do not have to invent their own macros and can use these
new U-Boot macros.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

diff --git a/include/pci.h b/include/pci.h
index 6c1094d729982630d7f934160a2bb1af8955bd3d..0ea41a7e1ba2e971216abe50a7a1997cbed89e04 100644 (file)
--- a/include/pci.h
+++ b/include/pci.h
@@ -522,6 +522,51 @@
 
 #include <pci_ids.h>
 
+/*
+ * Config Address for PCI Configuration Mechanism #1
+ *
+ * See PCI Local Bus Specification, Revision 3.0,
+ * Section 3.2.2.3.2, Figure 3-2, p. 50.
+ */
+
+#define PCI_CONF1_BUS_SHIFT    16 /* Bus number */
+#define PCI_CONF1_DEV_SHIFT    11 /* Device number */
+#define PCI_CONF1_FUNC_SHIFT   8  /* Function number */
+
+#define PCI_CONF1_BUS_MASK     0xff
+#define PCI_CONF1_DEV_MASK     0x1f
+#define PCI_CONF1_FUNC_MASK    0x7
+#define PCI_CONF1_REG_MASK     0xfc /* Limit aligned offset to a maximum of 256B */
+
+#define PCI_CONF1_ENABLE       BIT(31)
+#define PCI_CONF1_BUS(x)       (((x) & PCI_CONF1_BUS_MASK) << PCI_CONF1_BUS_SHIFT)
+#define PCI_CONF1_DEV(x)       (((x) & PCI_CONF1_DEV_MASK) << PCI_CONF1_DEV_SHIFT)
+#define PCI_CONF1_FUNC(x)      (((x) & PCI_CONF1_FUNC_MASK) << PCI_CONF1_FUNC_SHIFT)
+#define PCI_CONF1_REG(x)       ((x) & PCI_CONF1_REG_MASK)
+
+#define PCI_CONF1_ADDRESS(bus, dev, func, reg) \
+       (PCI_CONF1_ENABLE | \
+        PCI_CONF1_BUS(bus) | \
+        PCI_CONF1_DEV(dev) | \
+        PCI_CONF1_FUNC(func) | \
+        PCI_CONF1_REG(reg))
+
+/*
+ * Extension of PCI Config Address for accessing extended PCIe registers
+ *
+ * No standardized specification, but used on lot of non-ECAM-compliant ARM SoCs
+ * or on AMD Barcelona and new CPUs. Reserved bits [27:24] of PCI Config Address
+ * are used for specifying additional 4 high bits of PCI Express register.
+ */
+
+#define PCI_CONF1_EXT_REG_SHIFT        16
+#define PCI_CONF1_EXT_REG_MASK 0xf00
+#define PCI_CONF1_EXT_REG(x)   (((x) & PCI_CONF1_EXT_REG_MASK) << PCI_CONF1_EXT_REG_SHIFT)
+
+#define PCI_CONF1_EXT_ADDRESS(bus, dev, func, reg) \
+       (PCI_CONF1_ADDRESS(bus, dev, func, reg) | \
+        PCI_CONF1_EXT_REG(reg))
+
 /*
  * Enhanced Configuration Access Mechanism (ECAM)
  *