board: freescale: p1_p2_rdb_pc: Do not set MPC85xx_PMUXCR_SDHC_WP bit when SDHC_WP...

When MPC85xx_PMUXCR_SDHC_WP is set then SDHC controller automatically makes
inserted SD card readonly if GPIO[9] is active.

In some design GPIO[9] pin does not have to be connected to SD card
write-protect pin and can be used as GPIO.

So do not set MPC85xx_PMUXCR_SDHC_WP bit when GPIO[9] is not used for
SDHC_WP functionality.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>

diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
index dde0c1dcd2dfbaa6f35b97a84389d29d4ee5df8d..bed2033e36f80621277c52ccda19ccc73cc53e45 100644 (file)
--- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
+++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
@@ -147,8 +147,10 @@ int board_early_init_f(void)
 {
        ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 
-       setbits_be32(&gur->pmuxcr,
-                       (MPC85xx_PMUXCR_SDHC_CD | MPC85xx_PMUXCR_SDHC_WP));
+       setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SDHC_CD);
+#ifndef SDHC_WP_IS_GPIO
+       setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SDHC_WP);
+#endif
        clrbits_be32(&gur->sdhcdcr, SDHCDCR_CD_INV);
 
        clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SD_DATA);