kontron-sl-mx8mm: fix missing configs and deadlock in CI

Even if board can be successfuly built, CI goes in deadlock (see thread
on https://www.mail-archive.com/u-boot@lists.denx.de/msg419663.html).
This is caused by SYS_CONFIG set in header file and because defconfig
for the board is out of sync with Kconfig. As result, buildman goes on
to read from stdin until an OOM is reached.

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Frieder Schrempf <frieder.schrempf@kontron.de>

diff --git a/configs/kontron-sl-mx8mm_defconfig b/configs/kontron-sl-mx8mm_defconfig
index 06c57b7555e2823f2fe4dcc5a15aaec8f174c55b..02897818d9a92196180fe838f812159a443f5af4 100644 (file)
--- a/configs/kontron-sl-mx8mm_defconfig
+++ b/configs/kontron-sl-mx8mm_defconfig
@@ -8,6 +8,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x10000
 CONFIG_ENV_SIZE=0x10000
 CONFIG_ENV_OFFSET=0x1f0000
 CONFIG_ENV_SECT_SIZE=0x10000
+CONFIG_SYS_MALLOC_LEN=0x4000000
 CONFIG_DM_GPIO=y
 CONFIG_SPL_DM_SPI=y
 CONFIG_DEFAULT_DEVICE_TREE="imx8mm-kontron-n801x-s"
@@ -17,6 +18,7 @@ CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
 CONFIG_SPL=y
+CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
 CONFIG_DISTRO_DEFAULTS=y
@@ -25,7 +27,7 @@ CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
 # CONFIG_USE_SPL_FIT_GENERATOR is not set
 CONFIG_OF_BOARD_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/kontron/sl-mx8mm/imximage.cfg"
+CONFIG_IMX_CONFIG="board/kontron/sl-mx8mm/imximage.cfg"
 CONFIG_BOARD_TYPES=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SEPARATE_BSS=y

diff --git a/include/configs/kontron-sl-mx8mm.h b/include/configs/kontron-sl-mx8mm.h
index 4909b3679d85eb5483c43855b86fad21b8a31264..0d9ab3b75585cb9d52ea4c62cce96bcda91f61e6 100644 (file)
--- a/include/configs/kontron-sl-mx8mm.h
+++ b/include/configs/kontron-sl-mx8mm.h
@@ -22,7 +22,6 @@
 #define CONFIG_SYS_INIT_RAM_ADDR       0x40000000
 #define CONFIG_SYS_INIT_RAM_SIZE       0x200000
 
-#define CONFIG_SYS_MALLOC_LEN          SZ_64M
 #define CONFIG_SYS_HZ                  1000
 
 #define CONFIG_SYS_INIT_SP_OFFSET \
@@ -55,8 +54,6 @@
 #define BOOTENV
 #endif
 
-#define CONFIG_LOADADDR                        0x40480000
-#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 #define CONFIG_SYS_BOOTM_LEN           SZ_64M
 #define CONFIG_SPL_MAX_SIZE            (148 * SZ_1K)
 #define CONFIG_FSL_USDHC