From f01e947c4aa47068569c4baa977b750b2c527627 Mon Sep 17 00:00:00 2001 From: Enrico Leto <enrico.leto@siemens.com> Date: Wed, 8 Nov 2023 15:53:19 +0100 Subject: [PATCH] configs: thuban, rastaban: remove emmc These targets use NAND FLASH only. Maybe some MMC definitions were added by trying MMC for the etamin target evaluation and were not removed. Signed-off-by: Enrico Leto <enrico.leto@siemens.com> --- configs/draco-rastaban_defconfig | 6 ++---- configs/draco-thuban_defconfig | 6 ++---- 2 files changed, 4 insertions(+), 8 deletions(-) diff --git a/configs/draco-rastaban_defconfig b/configs/draco-rastaban_defconfig index 3ac16c3986..7f96893560 100644 --- a/configs/draco-rastaban_defconfig +++ b/configs/draco-rastaban_defconfig @@ -14,7 +14,6 @@ CONFIG_DEFAULT_DEVICE_TREE="am335x-draco" CONFIG_AM33XX=y CONFIG_SYS_MPUCLK=300 CONFIG_TARGET_RASTABAN=y -CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y CONFIG_BOOTCOUNT_BOOTLIMIT=3 CONFIG_SPL=y @@ -39,6 +38,7 @@ CONFIG_SPL_BSS_START_ADDR=0x80000000 CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80208000 +# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SPL_I2C=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y @@ -55,7 +55,6 @@ CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set @@ -90,8 +89,7 @@ CONFIG_DFU_NAND=y CONFIG_SYS_DFU_DATA_BUF_SIZE=0x100000 CONFIG_SYS_I2C_LEGACY=y CONFIG_SPL_SYS_I2C_LEGACY=y -# CONFIG_SPL_DM_MMC is not set -CONFIG_MMC_OMAP_HS=y +# CONFIG_MMC is not set CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 diff --git a/configs/draco-thuban_defconfig b/configs/draco-thuban_defconfig index 63225d2363..9046ca09a2 100644 --- a/configs/draco-thuban_defconfig +++ b/configs/draco-thuban_defconfig @@ -14,7 +14,6 @@ CONFIG_DEFAULT_DEVICE_TREE="am335x-draco" CONFIG_AM33XX=y CONFIG_SYS_MPUCLK=300 CONFIG_TARGET_THUBAN=y -CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y CONFIG_BOOTCOUNT_BOOTLIMIT=3 CONFIG_SPL=y @@ -39,6 +38,7 @@ CONFIG_SPL_BSS_START_ADDR=0x80000000 CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80208000 +# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SPL_I2C=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y @@ -55,7 +55,6 @@ CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set @@ -90,8 +89,7 @@ CONFIG_DFU_NAND=y CONFIG_SYS_DFU_DATA_BUF_SIZE=0x100000 CONFIG_SYS_I2C_LEGACY=y CONFIG_SPL_SYS_I2C_LEGACY=y -# CONFIG_SPL_DM_MMC is not set -CONFIG_MMC_OMAP_HS=y +# CONFIG_MMC is not set CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 -- 2.39.5