From 4bd143b57dc0cb07b553c989cc16a785642e2d0f Mon Sep 17 00:00:00 2001
From: Jagan Teki <jagan@amarulasolutions.com>
Date: Tue, 17 Sep 2019 11:40:41 +0530
Subject: [PATCH] configs: tinker: Enable SDRAM, SPL stack

SPL sets up SDRAM while in its board_init_f()
function, it is possible for the stack to move
there before board_init_r() is reached.

So it is required to reserve the stack for SDRAM,
with a proper location and size otherwise any
operations during SPL handoff would leads to failure.

On, this particular context tinker-rk3288 SPL is
failing to launch U-Boot proper on SDRAM due to
lack of stack.

 U-Boot SPL 2019.10-rc3-00297-g5ba8b12543 (Sep 12 2019 - 08:50:36 +0530)
 Trying to boot from MMC1
 spl: mmc init failed with error: -110
 SPL: failed to boot from all boot devices
 ### ERROR ### Please RESET the board ###

So, enable SPL_STACK_R_ADDR and it's related-config
items for SDRAM, SPL stack to setup properly.

Reported-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
---
 configs/tinker-rk3288_defconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/configs/tinker-rk3288_defconfig b/configs/tinker-rk3288_defconfig
index adab1cba42..359be078ac 100644
--- a/configs/tinker-rk3288_defconfig
+++ b/configs/tinker-rk3288_defconfig
@@ -4,6 +4,7 @@ CONFIG_SYS_TEXT_BASE=0x01000000
 CONFIG_ROCKCHIP_RK3288=y
 CONFIG_TARGET_TINKER_RK3288=y
 CONFIG_NR_DRAM_BANKS=1
+CONFIG_SPL_STACK_R_ADDR=0x80000
 CONFIG_SPL_SIZE_LIMIT=307200
 CONFIG_DEBUG_UART_BASE=0xff690000
 CONFIG_DEBUG_UART_CLOCK=24000000
@@ -15,6 +16,8 @@ CONFIG_CONSOLE_MUX=y
 CONFIG_DEFAULT_FDT_FILE="rk3288-tinker.dtb"
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
-- 
2.39.5