From: Trevor Woerner Date: Fri, 11 Jun 2021 02:37:02 +0000 (-0400) Subject: lpc32xx: Kconfig: switch to CONFIG_CONS_INDEX X-Git-Url: http://git.dujemihanovic.xyz/img/static/%7B%7B?a=commitdiff_plain;h=bd4dbf9e435345cf859922fca74dc0603d7dac2b;p=u-boot.git lpc32xx: Kconfig: switch to CONFIG_CONS_INDEX There's nothing special or unique to the lpc32xx that requires its own config parameter for specifying the console uart index. Therefore instead of using the lpc32xx-specific CONFIG_SYS_LPC32XX_UART include parameter, use the already-available CONFIG_CONS_INDEX from Kconfig. Signed-off-by: Trevor Woerner Reviewed-by: Simon Glass --- diff --git a/arch/arm/include/asm/arch-lpc32xx/config.h b/arch/arm/include/asm/arch-lpc32xx/config.h index 0836091af2..45e46f9946 100644 --- a/arch/arm/include/asm/arch-lpc32xx/config.h +++ b/arch/arm/include/asm/arch-lpc32xx/config.h @@ -12,8 +12,8 @@ /* Basic CPU architecture */ /* UART configuration */ -#if (CONFIG_SYS_LPC32XX_UART == 1) || (CONFIG_SYS_LPC32XX_UART == 2) || \ - (CONFIG_SYS_LPC32XX_UART == 7) +#if (CONFIG_CONS_INDEX == 1) || (CONFIG_CONS_INDEX == 2) || \ + (CONFIG_CONS_INDEX == 7) #if !defined(CONFIG_LPC32XX_HSUART) #define CONFIG_LPC32XX_HSUART #endif diff --git a/arch/arm/mach-lpc32xx/devices.c b/arch/arm/mach-lpc32xx/devices.c index e1e2e0d094..0a4fef295a 100644 --- a/arch/arm/mach-lpc32xx/devices.c +++ b/arch/arm/mach-lpc32xx/devices.c @@ -23,8 +23,7 @@ void lpc32xx_uart_init(unsigned int uart_id) return; /* Disable loopback mode, if it is set by S1L bootloader */ - clrbits_le32(&ctrl->loop, - UART_LOOPBACK(CONFIG_SYS_LPC32XX_UART)); + clrbits_le32(&ctrl->loop, UART_LOOPBACK(uart_id)); if (uart_id < 3 || uart_id > 6) return; diff --git a/board/timll/devkit3250/devkit3250.c b/board/timll/devkit3250/devkit3250.c index 3c744b943f..9d4ffb0f97 100644 --- a/board/timll/devkit3250/devkit3250.c +++ b/board/timll/devkit3250/devkit3250.c @@ -38,7 +38,7 @@ void reset_periph(void) int board_early_init_f(void) { - lpc32xx_uart_init(CONFIG_SYS_LPC32XX_UART); + lpc32xx_uart_init(CONFIG_CONS_INDEX); lpc32xx_i2c_init(1); lpc32xx_i2c_init(2); lpc32xx_ssp_init(); diff --git a/board/timll/devkit3250/devkit3250_spl.c b/board/timll/devkit3250/devkit3250_spl.c index 47af78ae0b..12e8ae9c39 100644 --- a/board/timll/devkit3250/devkit3250_spl.c +++ b/board/timll/devkit3250/devkit3250_spl.c @@ -49,7 +49,7 @@ void spl_board_init(void) /* First of all silence buzzer controlled by GPO_20 */ writel((1 << 20), &gpio->p3_outp_clr); - lpc32xx_uart_init(CONFIG_SYS_LPC32XX_UART); + lpc32xx_uart_init(CONFIG_CONS_INDEX); preloader_console_init(); ddr_init(&dram_64mb); diff --git a/board/work-microwave/work_92105/work_92105.c b/board/work-microwave/work_92105/work_92105.c index bdcecff730..5d12f84cfe 100644 --- a/board/work-microwave/work_92105/work_92105.c +++ b/board/work-microwave/work_92105/work_92105.c @@ -37,7 +37,7 @@ void reset_periph(void) int board_early_init_f(void) { /* initialize serial port for console */ - lpc32xx_uart_init(CONFIG_SYS_LPC32XX_UART); + lpc32xx_uart_init(CONFIG_CONS_INDEX); /* enable I2C, SSP, MAC, NAND */ lpc32xx_i2c_init(1); /* only I2C1 has devices, I2C2 has none */ lpc32xx_ssp_init(); diff --git a/board/work-microwave/work_92105/work_92105_spl.c b/board/work-microwave/work_92105/work_92105_spl.c index a31553a2d2..d9401145f2 100644 --- a/board/work-microwave/work_92105/work_92105_spl.c +++ b/board/work-microwave/work_92105/work_92105_spl.c @@ -58,7 +58,7 @@ const struct emc_dram_settings dram_128mb = { void spl_board_init(void) { /* initialize serial port for console */ - lpc32xx_uart_init(CONFIG_SYS_LPC32XX_UART); + lpc32xx_uart_init(CONFIG_CONS_INDEX); /* initialize console */ preloader_console_init(); /* init DDR and NAND to chainload U-Boot */ diff --git a/configs/devkit3250_defconfig b/configs/devkit3250_defconfig index 93c048cee8..9ae70f7d46 100644 --- a/configs/devkit3250_defconfig +++ b/configs/devkit3250_defconfig @@ -51,6 +51,8 @@ CONFIG_PHYLIB=y CONFIG_PHY_ADDR_ENABLE=y CONFIG_PHY_ADDR=31 CONFIG_PHY_SMSC=y +CONFIG_SPECIFY_CONSOLE_INDEX=y +CONFIG_CONS_INDEX=5 CONFIG_SYS_NS16550=y CONFIG_SPI=y CONFIG_USB=y diff --git a/configs/work_92105_defconfig b/configs/work_92105_defconfig index c3f666dcfe..e9605adedd 100644 --- a/configs/work_92105_defconfig +++ b/configs/work_92105_defconfig @@ -48,5 +48,7 @@ CONFIG_MTD_RAW_NAND=y CONFIG_PHYLIB=y CONFIG_PHY_ADDR_ENABLE=y CONFIG_PHY_SMSC=y +CONFIG_SPECIFY_CONSOLE_INDEX=y +CONFIG_CONS_INDEX=5 CONFIG_SYS_NS16550=y CONFIG_SPI=y diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h index 5d2b77b4a3..921a38c01e 100644 --- a/include/configs/devkit3250.h +++ b/include/configs/devkit3250.h @@ -30,11 +30,6 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_4K \ - GENERATED_GBL_DATA_SIZE) -/* - * Serial Driver - */ -#define CONFIG_SYS_LPC32XX_UART 5 /* UART5 */ - /* * DMA */ diff --git a/include/configs/work_92105.h b/include/configs/work_92105.h index 7874b77f3f..076a1b065e 100644 --- a/include/configs/work_92105.h +++ b/include/configs/work_92105.h @@ -35,11 +35,6 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_512K \ - GENERATED_GBL_DATA_SIZE) -/* - * Serial Driver - */ -#define CONFIG_SYS_LPC32XX_UART 5 /* UART5 - NS16550 */ - /* * Ethernet Driver */ diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index e549a5557f..624d851f0d 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -2734,7 +2734,6 @@ CONFIG_SYS_LOW CONFIG_SYS_LOWMEM_BASE CONFIG_SYS_LOW_RES_TIMER CONFIG_SYS_LPAE_SDRAM_BASE -CONFIG_SYS_LPC32XX_UART CONFIG_SYS_LS1_DDR_BLOCK1_SIZE CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS