From fe8f7066d394d72ff96f4b8e5988407da149e462 Mon Sep 17 00:00:00 2001
From: Ajay Bhargav <ajay.bhargav@einfochips.com>
Date: Wed, 5 Oct 2011 03:13:23 +0000
Subject: [PATCH] mmc: CMD7:MMC_CMD_SELECT_CARD response fix

As per JEDEC document JESD84-A441 (page 105) response for CMD7
(MMC_CMD_SELECT_CARD) response should be R1 instead of R1b. In uboot we
never take MMC to disconnected state and on powerup its always ideal
state which later goes to stand-by state.

from document footnote:
R1 while selecting from Stand-By State to Transfer State; R1b while
selecting from Disconnected State to Programming State.

Signed-off-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
---
 drivers/mmc/mmc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 96facb7659..37ce6e85a1 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -988,7 +988,7 @@ int mmc_startup(struct mmc *mmc)
 	/* Select the card, and put it into Transfer Mode */
 	if (!mmc_host_is_spi(mmc)) { /* cmd not supported in spi */
 		cmd.cmdidx = MMC_CMD_SELECT_CARD;
-		cmd.resp_type = MMC_RSP_R1b;
+		cmd.resp_type = MMC_RSP_R1;
 		cmd.cmdarg = mmc->rca << 16;
 		cmd.flags = 0;
 		err = mmc_send_cmd(mmc, &cmd, NULL);
-- 
2.39.5