From: Tom Rini Date: Sat, 15 May 2021 01:34:14 +0000 (-0400) Subject: ppc: Remove mpc8308_p1m board X-Git-Url: http://git.dujemihanovic.xyz/img/static/%7B%7B%20%28.OutputFormats.Get?a=commitdiff_plain;h=b617d40c505478a01e4c1175acc8bb02e2902ba6;p=u-boot.git ppc: Remove mpc8308_p1m board This board has not been converted to CONFIG_DM_PCI by the deadline. Remove it. Cc: Ilya Yanok Signed-off-by: Tom Rini --- diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig index e0bdfc4b97..23f7a60a44 100644 --- a/arch/powerpc/cpu/mpc83xx/Kconfig +++ b/arch/powerpc/cpu/mpc83xx/Kconfig @@ -8,10 +8,6 @@ choice prompt "Target select" optional -config TARGET_MPC8308_P1M - bool "Support mpc8308_p1m" - select ARCH_MPC8308 - config TARGET_VE8313 bool "Support ve8313" select ARCH_MPC8313 @@ -307,7 +303,6 @@ source "board/freescale/mpc8349emds/Kconfig" source "board/freescale/mpc837xerdb/Kconfig" source "board/ids/ids8313/Kconfig" source "board/keymile/Kconfig" -source "board/mpc8308_p1m/Kconfig" source "board/tqc/tqm834x/Kconfig" source "board/ve8313/Kconfig" source "board/gdsys/mpc8308/Kconfig" diff --git a/board/mpc8308_p1m/Kconfig b/board/mpc8308_p1m/Kconfig deleted file mode 100644 index b7e39dafbc..0000000000 --- a/board/mpc8308_p1m/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_MPC8308_P1M - -config SYS_BOARD - default "mpc8308_p1m" - -config SYS_CONFIG_NAME - default "mpc8308_p1m" - -endif diff --git a/board/mpc8308_p1m/MAINTAINERS b/board/mpc8308_p1m/MAINTAINERS deleted file mode 100644 index 80d8de7711..0000000000 --- a/board/mpc8308_p1m/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -MPC8308_P1M BOARD -M: Ilya Yanok -S: Maintained -F: board/mpc8308_p1m/ -F: include/configs/mpc8308_p1m.h -F: configs/mpc8308_p1m_defconfig diff --git a/board/mpc8308_p1m/Makefile b/board/mpc8308_p1m/Makefile deleted file mode 100644 index 4ec3b0cda9..0000000000 --- a/board/mpc8308_p1m/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# (C) Copyright 2010 -# Ilya Yanok, Emcraft Systems, yanok@emcraft.com - -obj-y := mpc8308_p1m.o sdram.o diff --git a/board/mpc8308_p1m/mpc8308_p1m.c b/board/mpc8308_p1m/mpc8308_p1m.c deleted file mode 100644 index 87607bd489..0000000000 --- a/board/mpc8308_p1m/mpc8308_p1m.c +++ /dev/null @@ -1,92 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2010 Freescale Semiconductor, Inc. - * Copyright (C) 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -int checkboard(void) -{ - printf("Board: MPC8308 P1M\n"); - - return 0; -} - -static struct pci_region pcie_regions_0[] = { - { - .bus_start = CONFIG_SYS_PCIE1_MEM_BASE, - .phys_start = CONFIG_SYS_PCIE1_MEM_PHYS, - .size = CONFIG_SYS_PCIE1_MEM_SIZE, - .flags = PCI_REGION_MEM, - }, - { - .bus_start = CONFIG_SYS_PCIE1_IO_BASE, - .phys_start = CONFIG_SYS_PCIE1_IO_PHYS, - .size = CONFIG_SYS_PCIE1_IO_SIZE, - .flags = PCI_REGION_IO, - }, -}; - -void pci_init_board(void) -{ - immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; - sysconf83xx_t *sysconf = &immr->sysconf; - law83xx_t *pcie_law = sysconf->pcielaw; - struct pci_region *pcie_reg[] = { pcie_regions_0 }; - - fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_PEX, - FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); - - /* Deassert the resets in the control register */ - out_be32(&sysconf->pecr1, 0xE0008000); - udelay(2000); - - /* Configure PCI Express Local Access Windows */ - out_be32(&pcie_law[0].bar, CONFIG_SYS_PCIE1_BASE & LAWBAR_BAR); - out_be32(&pcie_law[0].ar, LBLAWAR_EN | LBLAWAR_512MB); - - mpc83xx_pcie_init(1, pcie_reg); -} - -#if defined(CONFIG_OF_BOARD_SETUP) -int ft_board_setup(void *blob, struct bd_info *bd) -{ - ft_cpu_setup(blob, bd); - fsl_fdt_fixup_dr_usb(blob, bd); - - return 0; -} -#endif - -int board_eth_init(struct bd_info *bis) -{ - int rv, num_if = 0; - - /* Initialize TSECs first */ - rv = cpu_eth_init(bis); - if (rv >= 0) - num_if += rv; - else - printf("ERROR: failed to initialize TSECs.\n"); - - rv = pci_eth_init(bis); - if (rv >= 0) - num_if += rv; - else - printf("ERROR: failed to initialize PCI Ethernet.\n"); - - return num_if; -} diff --git a/board/mpc8308_p1m/sdram.c b/board/mpc8308_p1m/sdram.c deleted file mode 100644 index 62a2d8a53a..0000000000 --- a/board/mpc8308_p1m/sdram.c +++ /dev/null @@ -1,80 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2007 Freescale Semiconductor, Inc. - * Copyright (C) 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com - * - * This files is mostly identical to the original from - * board/freescale/mpc8308rdb/sdram.c - */ - -#include -#include -#include -#include - -#include -#include - -#include - -DECLARE_GLOBAL_DATA_PTR; - -/* Fixed sdram init -- doesn't use serial presence detect. - * - * This is useful for faster booting in configs where the RAM is unlikely - * to be changed, or for things like NAND booting where space is tight. - */ -static long fixed_sdram(void) -{ - immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024; - u32 msize_log2 = __ilog2(msize); - - out_be32(&im->sysconf.ddrlaw[0].bar, - CONFIG_SYS_SDRAM_BASE & 0xfffff000); - out_be32(&im->sysconf.ddrlaw[0].ar, LBLAWAR_EN | (msize_log2 - 1)); - out_be32(&im->sysconf.ddrcdr, CONFIG_SYS_DDRCDR_VALUE); - - out_be32(&im->ddr.csbnds[0].csbnds, (msize - 1) >> 24); - out_be32(&im->ddr.cs_config[0], CONFIG_SYS_DDR_CS0_CONFIG); - - /* Currently we use only one CS, so disable the other bank. */ - out_be32(&im->ddr.cs_config[1], 0); - - out_be32(&im->ddr.sdram_clk_cntl, CONFIG_SYS_DDR_SDRAM_CLK_CNTL); - out_be32(&im->ddr.timing_cfg_3, CONFIG_SYS_DDR_TIMING_3); - out_be32(&im->ddr.timing_cfg_1, CONFIG_SYS_DDR_TIMING_1); - out_be32(&im->ddr.timing_cfg_2, CONFIG_SYS_DDR_TIMING_2); - out_be32(&im->ddr.timing_cfg_0, CONFIG_SYS_DDR_TIMING_0); - - out_be32(&im->ddr.sdram_cfg, CONFIG_SYS_DDR_SDRAM_CFG); - out_be32(&im->ddr.sdram_cfg2, CONFIG_SYS_DDR_SDRAM_CFG2); - out_be32(&im->ddr.sdram_mode, CONFIG_SYS_DDR_MODE); - out_be32(&im->ddr.sdram_mode2, CONFIG_SYS_DDR_MODE2); - - out_be32(&im->ddr.sdram_interval, CONFIG_SYS_DDR_INTERVAL); - sync(); - - /* enable DDR controller */ - setbits_be32(&im->ddr.sdram_cfg, SDRAM_CFG_MEM_EN); - sync(); - - return get_ram_size(CONFIG_SYS_SDRAM_BASE, msize); -} - -int dram_init(void) -{ - immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - u32 msize; - - if ((in_be32(&im->sysconf.immrbar) & IMMRBAR_BASE_ADDR) != (u32)im) - return -1; - - /* DDR SDRAM */ - msize = fixed_sdram(); - - /* set total bus SDRAM size(bytes) -- DDR */ - gd->ram_size = msize; - - return 0; -} diff --git a/configs/mpc8308_p1m_defconfig b/configs/mpc8308_p1m_defconfig deleted file mode 100644 index 75966ed3b4..0000000000 --- a/configs/mpc8308_p1m_defconfig +++ /dev/null @@ -1,133 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xFC000000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_SECT_SIZE=0x20000 -CONFIG_SYS_CLK_FREQ=33333333 -CONFIG_MPC83xx=y -CONFIG_TARGET_MPC8308_P1M=y -CONFIG_SYSTEM_PLL_VCO_DIV_2=y -CONFIG_SYSTEM_PLL_FACTOR_4_1=y -CONFIG_CORE_PLL_RATIO_3_1=y -CONFIG_BOOT_MEMORY_SPACE_LOW=y -CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y -CONFIG_BAT0=y -CONFIG_BAT0_NAME="DDR" -CONFIG_BAT0_BASE=0x00000000 -CONFIG_BAT0_LENGTH_128_MBYTES=y -CONFIG_BAT0_ACCESS_RW=y -CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y -CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y -CONFIG_BAT0_USER_MODE_VALID=y -CONFIG_BAT0_SUPERVISOR_MODE_VALID=y -CONFIG_BAT1=y -CONFIG_BAT1_NAME="IMMRBAR" -CONFIG_BAT1_BASE=0xE0000000 -CONFIG_BAT1_LENGTH_8_MBYTES=y -CONFIG_BAT1_ACCESS_RW=y -CONFIG_BAT1_ICACHE_INHIBITED=y -CONFIG_BAT1_ICACHE_GUARDED=y -CONFIG_BAT1_DCACHE_INHIBITED=y -CONFIG_BAT1_DCACHE_GUARDED=y -CONFIG_BAT1_USER_MODE_VALID=y -CONFIG_BAT1_SUPERVISOR_MODE_VALID=y -CONFIG_BAT2=y -CONFIG_BAT2_NAME="FLASH" -CONFIG_BAT2_BASE=0xFC000000 -CONFIG_BAT2_LENGTH_8_MBYTES=y -CONFIG_BAT2_ACCESS_RW=y -CONFIG_BAT2_ICACHE_MEMORYCOHERENCE=y -CONFIG_BAT2_DCACHE_INHIBITED=y -CONFIG_BAT2_DCACHE_GUARDED=y -CONFIG_BAT2_USER_MODE_VALID=y -CONFIG_BAT2_SUPERVISOR_MODE_VALID=y -CONFIG_BAT3=y -CONFIG_BAT3_NAME="STACKINDCACHE" -CONFIG_BAT3_BASE=0xE6000000 -CONFIG_BAT3_ACCESS_RW=y -CONFIG_BAT3_USER_MODE_VALID=y -CONFIG_BAT3_SUPERVISOR_MODE_VALID=y -CONFIG_LBLAW0=y -CONFIG_LBLAW0_BASE=0xFC000000 -CONFIG_LBLAW0_NAME="FLASH" -CONFIG_LBLAW0_LENGTH_64_MBYTES=y -CONFIG_LBLAW1=y -CONFIG_LBLAW1_BASE=0xFBFF0000 -CONFIG_LBLAW1_NAME="SJA1000" -CONFIG_LBLAW1_LENGTH_32_KBYTES=y -CONFIG_LBLAW2=y -CONFIG_LBLAW2_BASE=0xFBFF8000 -CONFIG_LBLAW2_NAME="CPLD" -CONFIG_LBLAW2_LENGTH_32_KBYTES=y -CONFIG_ELBC_BR0_OR0=y -CONFIG_BR0_OR0_NAME="FLASH" -CONFIG_BR0_OR0_BASE=0xFC000000 -CONFIG_BR0_PORTSIZE_16BIT=y -CONFIG_OR0_AM_64_MBYTES=y -CONFIG_OR0_XAM_SET=y -CONFIG_OR0_SCY_4=y -CONFIG_OR0_CSNT_EARLIER=y -CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y -CONFIG_OR0_XACS_EXTENDED=y -CONFIG_OR0_TRLX_RELAXED=y -CONFIG_OR0_EHTR_8_CYCLE=y -CONFIG_ELBC_BR1_OR1=y -CONFIG_BR1_OR1_NAME="SJA1000" -CONFIG_BR1_OR1_BASE=0xFBFF0000 -CONFIG_OR1_SCY_5=y -CONFIG_OR1_EHTR_1_CYCLE=y -CONFIG_ELBC_BR2_OR2=y -CONFIG_BR2_OR2_NAME="CPLD" -CONFIG_BR2_OR2_BASE=0xFBFF8000 -CONFIG_OR2_SCY_4=y -CONFIG_OR2_EHTR_1_CYCLE=y -CONFIG_HID0_FINAL_EMCP=y -CONFIG_HID0_FINAL_DPM=y -CONFIG_HID0_FINAL_ICE=y -CONFIG_HID2_HBE=y -CONFIG_SICR_ESDHC_A_GPIO=y -CONFIG_SICR_ESDHC_B_GPIO=y -CONFIG_SICR_ESDHC_C_GTM=y -CONFIG_SICR_GPIO_A_TSEC2=y -CONFIG_SICR_GPIO_B_TSEC2=y -CONFIG_SICR_IEEE1588_A_GPIO=y -CONFIG_SICR_GTM_GPIO=y -CONFIG_SICR_GPIOSEL_IEEE1588=y -CONFIG_ACR_PIPE_DEP_4=y -CONFIG_ACR_RPTCNT_4=y -CONFIG_SPCR_TSECEP_3=y -CONFIG_LCRR_DBYP_PLL_BYPASSED=y -CONFIG_LCRR_CLKDIV_2=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_BOOTDELAY=5 -CONFIG_HUSH_PARSER=y -# CONFIG_AUTO_COMPLETE is not set -CONFIG_CMD_IMLS=y -CONFIG_CMD_I2C=y -CONFIG_CMD_PCI=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_ENV_OVERWRITE=y -CONFIG_SYS_REDUNDAND_ENVIRONMENT=y -CONFIG_ENV_ADDR=0xFC060000 -CONFIG_ENV_ADDR_REDUND=0xFC080000 -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_PROTECTION=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_MII=y -CONFIG_TSEC_ENET=y -CONFIG_SYS_NS16550=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/mpc8308_p1m.h b/include/configs/mpc8308_p1m.h deleted file mode 100644 index 489200996c..0000000000 --- a/include/configs/mpc8308_p1m.h +++ /dev/null @@ -1,307 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. - * Copyright (C) 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com - * - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include - -/* - * High Level Configuration Options - */ -#define CONFIG_E300 1 /* E300 family */ - -/* - * On-board devices - * - * TSECs - */ -#define CONFIG_TSEC1 -#define CONFIG_TSEC2 - -#define CONFIG_SYS_GPIO1_PRELIM -/* GPIO Default input/output settings */ -#define CONFIG_SYS_GPIO1_DIR 0x7AAF8C00 -/* - * Default GPIO values: - * LED#1 enabled; WLAN enabled; Both COM LED on (orange) - */ -#define CONFIG_SYS_GPIO1_DAT 0x08008C00 - -/* - * SERDES - */ -#define CONFIG_FSL_SERDES -#define CONFIG_FSL_SERDES1 0xe3000 - -/* - * DDR Setup - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory */ -#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 -#define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \ - | DDRCDR_PZ_LOZ \ - | DDRCDR_NZ_LOZ \ - | DDRCDR_ODT \ - | DDRCDR_Q_DRN) - /* 0x7b880001 */ -/* - * Manually set up DDR parameters - * consist of two chips HY5PS12621BFP-C4 from HYNIX - */ - -#define CONFIG_SYS_DDR_SIZE 128 /* MB */ - -#define CONFIG_SYS_DDR_CS0_BNDS 0x00000007 -#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN \ - | CSCONFIG_ODT_RD_NEVER \ - | CSCONFIG_ODT_WR_ONLY_CURRENT \ - | CSCONFIG_ROW_BIT_13 \ - | CSCONFIG_COL_BIT_10) - /* 0x80010102 */ -#define CONFIG_SYS_DDR_TIMING_3 0x00000000 -#define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \ - | (0 << TIMING_CFG0_WRT_SHIFT) \ - | (0 << TIMING_CFG0_RRT_SHIFT) \ - | (0 << TIMING_CFG0_WWT_SHIFT) \ - | (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \ - | (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \ - | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \ - | (2 << TIMING_CFG0_MRS_CYC_SHIFT)) - /* 0x00220802 */ -#define CONFIG_SYS_DDR_TIMING_1 ((2 << TIMING_CFG1_PRETOACT_SHIFT) \ - | (7 << TIMING_CFG1_ACTTOPRE_SHIFT) \ - | (2 << TIMING_CFG1_ACTTORW_SHIFT) \ - | (5 << TIMING_CFG1_CASLAT_SHIFT) \ - | (6 << TIMING_CFG1_REFREC_SHIFT) \ - | (2 << TIMING_CFG1_WRREC_SHIFT) \ - | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \ - | (2 << TIMING_CFG1_WRTORD_SHIFT)) - /* 0x27256222 */ -#define CONFIG_SYS_DDR_TIMING_2 ((1 << TIMING_CFG2_ADD_LAT_SHIFT) \ - | (4 << TIMING_CFG2_CPO_SHIFT) \ - | (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \ - | (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) \ - | (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \ - | (3 << TIMING_CFG2_CKE_PLS_SHIFT) \ - | (5 << TIMING_CFG2_FOUR_ACT_SHIFT)) - /* 0x121048c5 */ -#define CONFIG_SYS_DDR_INTERVAL ((0x0360 << SDRAM_INTERVAL_REFINT_SHIFT) \ - | (0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT)) - /* 0x03600100 */ -#define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SREN \ - | SDRAM_CFG_SDRAM_TYPE_DDR2 \ - | SDRAM_CFG_DBW_32) - /* 0x43080000 */ - -#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 /* 1 posted refresh */ -#define CONFIG_SYS_DDR_MODE ((0x0448 << SDRAM_MODE_ESD_SHIFT) \ - | (0x0232 << SDRAM_MODE_SD_SHIFT)) - /* ODT 150ohm CL=3, AL=1 on SDRAM */ -#define CONFIG_SYS_DDR_MODE2 0x00000000 - -/* - * Memory test - */ - -/* - * The reserved memory - */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ - -#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ - -/* - * Initial RAM Base Address Setup - */ -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - -/* - * FLASH on the Local Bus - */ -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT - -#define CONFIG_SYS_FLASH_BASE 0xFC000000 /* FLASH base address */ -#define CONFIG_SYS_FLASH_SIZE 64 /* FLASH size is 64M */ - - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 - -/* Flash Erase Timeout (ms) */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (1000 * 1024) -/* Flash Write Timeout (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (500 * 1024) - -/* - * SJA1000 CAN controller on Local Bus - */ -#define CONFIG_SYS_SJA1000_BASE 0xFBFF0000 - - -/* - * CPLD on Local Bus - */ -#define CONFIG_SYS_CPLD_BASE 0xFBFF8000 - - -/* - * Serial Port - */ -#undef CONFIG_SERIAL_SOFTWARE_FIFO -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600) - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 400000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_SPEED 400000 -#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 - -/* - * General PCI - * Addresses are mapped 1-1. - */ -#define CONFIG_SYS_PCIE1_BASE 0xA0000000 -#define CONFIG_SYS_PCIE1_MEM_BASE 0xA0000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS 0xA0000000 -#define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 -#define CONFIG_SYS_PCIE1_CFG_BASE 0xB0000000 -#define CONFIG_SYS_PCIE1_CFG_SIZE 0x01000000 -#define CONFIG_SYS_PCIE1_IO_BASE 0x00000000 -#define CONFIG_SYS_PCIE1_IO_PHYS 0xB1000000 -#define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 - -/* enable PCIE clock */ -#define CONFIG_SYS_SCCR_PCIEXP1CM 1 - -#define CONFIG_PCI_INDIRECT_BRIDGE -#define CONFIG_PCIE - -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ -#define CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES 1 - -/* - * TSEC - */ -#define CONFIG_SYS_TSEC1_OFFSET 0x24000 -#define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET) -#define CONFIG_SYS_TSEC2_OFFSET 0x25000 -#define CONFIG_SYS_TSEC2 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET) - -/* - * TSEC ethernet configuration - */ -#define CONFIG_TSEC1_NAME "eTSEC0" -#define CONFIG_TSEC2_NAME "eTSEC1" -#define TSEC1_PHY_ADDR 1 -#define TSEC2_PHY_ADDR 2 -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 -#define TSEC1_FLAGS 0 -#define TSEC2_FLAGS 0 - -/* Options are: eTSEC[0-1] */ -#define CONFIG_ETHPRIME "eTSEC0" - -/* - * Environment - */ - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ - -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ - -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux */ - -/* - * Environment Configuration - */ - -#if defined(CONFIG_TSEC_ENET) -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 -#endif - -#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ - - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "consoledev=ttyS0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addtty=setenv bootargs ${bootargs}" \ - " console=${consoledev},${baudrate}\0" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "addmisc=setenv bootargs ${bootargs}\0" \ - "kernel_addr=FC0A0000\0" \ - "fdt_addr=FC2A0000\0" \ - "ramdisk_addr=FC2C0000\0" \ - "u-boot=mpc8308_p1m/u-boot.bin\0" \ - "kernel_addr_r=1000000\0" \ - "fdt_addr_r=C00000\0" \ - "hostname=mpc8308_p1m\0" \ - "bootfile=mpc8308_p1m/uImage\0" \ - "fdtfile=mpc8308_p1m/mpc8308_p1m.dtb\0" \ - "rootpath=/opt/eldk-4.2/ppc_6xx\0" \ - "flash_self=run ramargs addip addtty addmtd addmisc;" \ - "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ - "flash_nfs=run nfsargs addip addtty addmtd addmisc;" \ - "bootm ${kernel_addr} - ${fdt_addr}\0" \ - "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ - "tftp ${fdt_addr_r} ${fdtfile};" \ - "run nfsargs addip addtty addmtd addmisc;" \ - "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ - "bootcmd=run flash_self\0" \ - "load=tftp ${loadaddr} ${u-boot}\0" \ - "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) \ - " +${filesize};era " __stringify(CONFIG_SYS_MONITOR_BASE)\ - " +${filesize};cp.b ${fileaddr} " \ - __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \ - "upd=run load update\0" \ - -#endif /* __CONFIG_H */