From: Mirza Krak <mirza.krak@hostmobility.com>
Date: Tue, 8 Sep 2015 08:30:49 +0000 (+0200)
Subject: spi: tegra20: Add support for mode selection
X-Git-Url: http://git.dujemihanovic.xyz/img/static/%7B%7B%20%28.OutputFormats.Get?a=commitdiff_plain;h=5cb1b7b395c0150e179f3b748d755cdc2f613a06;p=u-boot.git

spi: tegra20: Add support for mode selection

Respect the mode passed in set_mode ops.

Signed-off-by: Mirza Krak <mirza.krak@hostmobility.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
---

diff --git a/drivers/spi/tegra20_slink.c b/drivers/spi/tegra20_slink.c
index fbb665b86f..144716fd91 100644
--- a/drivers/spi/tegra20_slink.c
+++ b/drivers/spi/tegra20_slink.c
@@ -36,6 +36,11 @@ DECLARE_GLOBAL_DATA_PTR;
 #define SLINK_CMD_ENB			(1 << 31)
 #define SLINK_CMD_GO			(1 << 30)
 #define SLINK_CMD_M_S			(1 << 28)
+#define SLINK_CMD_IDLE_SCLK_DRIVE_LOW	(0 << 24)
+#define SLINK_CMD_IDLE_SCLK_DRIVE_HIGH	(1 << 24)
+#define SLINK_CMD_IDLE_SCLK_PULL_LOW	(2 << 24)
+#define SLINK_CMD_IDLE_SCLK_PULL_HIGH	(3 << 24)
+#define SLINK_CMD_IDLE_SCLK_MASK	(3 << 24)
 #define SLINK_CMD_CK_SDA		(1 << 21)
 #define SLINK_CMD_CS_POL		(1 << 13)
 #define SLINK_CMD_CS_VAL		(1 << 12)
@@ -331,6 +336,22 @@ static int tegra30_spi_set_speed(struct udevice *bus, uint speed)
 static int tegra30_spi_set_mode(struct udevice *bus, uint mode)
 {
 	struct tegra30_spi_priv *priv = dev_get_priv(bus);
+	struct spi_regs *regs = priv->regs;
+	u32 reg;
+
+	reg = readl(&regs->command);
+
+	/* Set CPOL and CPHA */
+	reg &= ~(SLINK_CMD_IDLE_SCLK_MASK | SLINK_CMD_CK_SDA);
+	if (mode & SPI_CPHA)
+		reg |= SLINK_CMD_CK_SDA;
+
+	if (mode & SPI_CPOL)
+		reg |= SLINK_CMD_IDLE_SCLK_DRIVE_HIGH;
+	else
+		reg |= SLINK_CMD_IDLE_SCLK_DRIVE_LOW;
+
+	writel(reg, &regs->command);
 
 	priv->mode = mode;
 	debug("%s: regs=%p, mode=%d\n", __func__, priv->regs, priv->mode);