From: Jonas Karlman Date: Wed, 2 Aug 2023 19:49:46 +0000 (+0000) Subject: rockchip: rk3568-nanopi-r5: Update defconfig for NanoPi R5C and R5S X-Git-Url: http://git.dujemihanovic.xyz/img/static/%7B%7B%20%28.OutputFormats.Get?a=commitdiff_plain;h=5b155997d445f770e9a2c0d4a20e4eb13eedfede;p=u-boot.git rockchip: rk3568-nanopi-r5: Update defconfig for NanoPi R5C and R5S Update and sync Kconfig options for NanoPi R5C and NanoPi R5S with other RK3568 boards. SPL_FIT_SIGNATURE is enabled to add a checksum validation of the FIT payload, also add LEGACY_IMAGE_FORMAT to keep boot scripts working. OF_SPL_REMOVE_PROPS, SPL_DM_SEQ_ALIAS and SPL_PINCTRL change ensure pinctrl for eMMC, SD-card and UART2 is applied in SPL. MMC_HS200_SUPPORT and SPL counterpart is enabled to speed up eMMC load times from on-board eMMC 5.1 modules. Drop remaining unused or unsupported options to sync with other RK3568 boards. Also sync device tree from linux v6.4 and drop u-boot,spl-boot-order and use the default from rk356x-u-boot.dtsi. Signed-off-by: Jonas Karlman Reviewed-by: Kever Yang --- diff --git a/arch/arm/dts/rk3568-nanopi-r5c.dts b/arch/arm/dts/rk3568-nanopi-r5c.dts index f70ca9f047..c718b8dbb9 100644 --- a/arch/arm/dts/rk3568-nanopi-r5c.dts +++ b/arch/arm/dts/rk3568-nanopi-r5c.dts @@ -106,7 +106,7 @@ rockchip-key { reset_button_pin: reset-button-pin { - rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>; }; }; }; diff --git a/arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi b/arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi index 0ecca85b20..094e5af6a7 100644 --- a/arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi +++ b/arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi @@ -11,7 +11,6 @@ / { chosen { stdout-path = &uart2; - u-boot,spl-boot-order = "same-as-spl", &sdmmc0, &sdhci; }; }; @@ -29,3 +28,8 @@ bootph-all; status = "okay"; }; + +&vcc5v0_usb_host { + /delete-property/ regulator-always-on; + /delete-property/ regulator-boot-on; +}; diff --git a/configs/nanopi-r5c-rk3568_defconfig b/configs/nanopi-r5c-rk3568_defconfig index 201b21ad77..badac5805d 100644 --- a/configs/nanopi-r5c-rk3568_defconfig +++ b/configs/nanopi-r5c-rk3568_defconfig @@ -20,7 +20,9 @@ CONFIG_SYS_LOAD_ADDR=0xc00800 CONFIG_DEBUG_UART=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y +CONFIG_SPL_FIT_SIGNATURE=y CONFIG_SPL_LOAD_FIT=y +CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-nanopi-r5c.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y @@ -43,8 +45,9 @@ CONFIG_CMD_REGULATOR=y # CONFIG_SPL_DOS_PARTITION is not set CONFIG_SPL_OF_CONTROL=y CONFIG_OF_LIVE=y -CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" CONFIG_SPL_DM_WARN=y +CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_SPL_REGMAP=y CONFIG_SPL_SYSCON=y CONFIG_SPL_CLK=y @@ -52,19 +55,18 @@ CONFIG_ROCKCHIP_GPIO=y CONFIG_SYS_I2C_ROCKCHIP=y CONFIG_MISC=y CONFIG_SUPPORT_EMMC_RPMB=y +CONFIG_MMC_HS200_SUPPORT=y +CONFIG_SPL_MMC_HS200_SUPPORT=y CONFIG_MMC_DW=y CONFIG_MMC_DW_ROCKCHIP=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_SDMA=y CONFIG_MMC_SDHCI_ROCKCHIP=y -CONFIG_ETH_DESIGNWARE=y -CONFIG_GMAC_ROCKCHIP=y CONFIG_PHY_ROCKCHIP_INNO_USB2=y CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y -CONFIG_POWER_DOMAIN=y +CONFIG_SPL_PINCTRL=y CONFIG_DM_PMIC=y CONFIG_PMIC_RK8XX=y -CONFIG_SPL_DM_REGULATOR_FIXED=y CONFIG_REGULATOR_RK8XX=y CONFIG_PWM_ROCKCHIP=y CONFIG_SPL_RAM=y @@ -72,7 +74,6 @@ CONFIG_BAUDRATE=1500000 CONFIG_DEBUG_UART_SHIFT=2 CONFIG_SYS_NS16550_MEM32=y CONFIG_SYSRESET=y -CONFIG_SYSRESET_PSCI=y CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/nanopi-r5s-rk3568_defconfig b/configs/nanopi-r5s-rk3568_defconfig index 67b2843070..fdcb0c266d 100644 --- a/configs/nanopi-r5s-rk3568_defconfig +++ b/configs/nanopi-r5s-rk3568_defconfig @@ -20,7 +20,9 @@ CONFIG_SYS_LOAD_ADDR=0xc00800 CONFIG_DEBUG_UART=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y +CONFIG_SPL_FIT_SIGNATURE=y CONFIG_SPL_LOAD_FIT=y +CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-nanopi-r5s.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y @@ -43,8 +45,9 @@ CONFIG_CMD_REGULATOR=y # CONFIG_SPL_DOS_PARTITION is not set CONFIG_SPL_OF_CONTROL=y CONFIG_OF_LIVE=y -CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" CONFIG_SPL_DM_WARN=y +CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_SPL_REGMAP=y CONFIG_SPL_SYSCON=y CONFIG_SPL_CLK=y @@ -52,19 +55,18 @@ CONFIG_ROCKCHIP_GPIO=y CONFIG_SYS_I2C_ROCKCHIP=y CONFIG_MISC=y CONFIG_SUPPORT_EMMC_RPMB=y +CONFIG_MMC_HS200_SUPPORT=y +CONFIG_SPL_MMC_HS200_SUPPORT=y CONFIG_MMC_DW=y CONFIG_MMC_DW_ROCKCHIP=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_SDMA=y CONFIG_MMC_SDHCI_ROCKCHIP=y -CONFIG_ETH_DESIGNWARE=y -CONFIG_GMAC_ROCKCHIP=y CONFIG_PHY_ROCKCHIP_INNO_USB2=y CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y -CONFIG_POWER_DOMAIN=y +CONFIG_SPL_PINCTRL=y CONFIG_DM_PMIC=y CONFIG_PMIC_RK8XX=y -CONFIG_SPL_DM_REGULATOR_FIXED=y CONFIG_REGULATOR_RK8XX=y CONFIG_PWM_ROCKCHIP=y CONFIG_SPL_RAM=y @@ -72,7 +74,6 @@ CONFIG_BAUDRATE=1500000 CONFIG_DEBUG_UART_SHIFT=2 CONFIG_SYS_NS16550_MEM32=y CONFIG_SYSRESET=y -CONFIG_SYSRESET_PSCI=y CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_EHCI_HCD=y