From: Vladimir Oltean <vladimir.oltean@nxp.com>
Date: Tue, 29 Jun 2021 17:53:11 +0000 (+0300)
Subject: arm: dts: ls1028a: enable the switch CPU port for the LS1028A-QDS
X-Git-Url: http://git.dujemihanovic.xyz/img/static/%7B%7B%20%28.OutputFormats.Get?a=commitdiff_plain;h=39dca76c34ebd06a1d7f9832598f697ff0dc8127;p=u-boot.git

arm: dts: ls1028a: enable the switch CPU port for the LS1028A-QDS

Due to an upstream change, the ls1028a.dtsi bindings for the mscc_felix
switch got accepted with all ports disabled by default and with no link
to the DSA master - this needs to be done on a per board basis.

Note that enetc-2 is not currently disabled in the ls1028a.dtsi, but
presumably at some point it might become. Explicitly enable it in the
QDS device trees anyway, to proactively avoid issues when that happens.

Fixes: a7fdac7e2a2a ("arm: dts: ls1028a: define QDS networking protocol combinations")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
---

diff --git a/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi b/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi
index fb1836a8ae..5a0f060c16 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi
@@ -20,6 +20,10 @@
 #include "fsl-sch-30841.dtsi"
 };
 
+&enetc2 {
+	status = "okay";
+};
+
 &mscc_felix {
 	status = "okay";
 };
@@ -47,3 +51,8 @@
 	phy-mode = "sgmii-2500";
 	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@03}>;
 };
+
+&mscc_felix_port4 {
+	ethernet = <&enetc2>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi b/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi
index 1d02a3e11d..39a83e10c4 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi
@@ -9,6 +9,10 @@
 #include "fsl-sch-30841.dtsi"
 };
 
+&enetc2 {
+	status = "okay";
+};
+
 &mscc_felix {
 	status = "okay";
 };
@@ -24,3 +28,8 @@
 	phy-mode = "sgmii-2500";
 	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@03}>;
 };
+
+&mscc_felix_port4 {
+	ethernet = <&enetc2>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi
index c92dd1bd2e..021fe3fbc6 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi
@@ -34,6 +34,10 @@
 	#include "fsl-sch-24801.dtsi"
 };
 
+&enetc2 {
+	status = "okay";
+};
+
 &mscc_felix {
 	status = "okay";
 };
@@ -61,3 +65,8 @@
 	phy-mode = "sgmii";
 	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1f}>;
 };
+
+&mscc_felix_port4 {
+	ethernet = <&enetc2>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi
index 941f7472eb..b6704d8089 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi
@@ -19,6 +19,10 @@
 	#include "fsl-sch-24801.dtsi"
 };
 
+&enetc2 {
+	status = "okay";
+};
+
 &mscc_felix {
 	status = "okay";
 };
@@ -46,3 +50,8 @@
 	phy-mode = "sgmii";
 	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1f}>;
 };
+
+&mscc_felix_port4 {
+	ethernet = <&enetc2>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi b/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi
index 7e483e656e..8c10897e56 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi
@@ -19,6 +19,10 @@
 #include "fsl-sch-30841.dtsi"
 };
 
+&enetc2 {
+	status = "okay";
+};
+
 &mscc_felix {
 	status = "okay";
 };
@@ -46,3 +50,8 @@
 	phy-mode = "usxgmii";
 	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@03}>;
 };
+
+&mscc_felix_port4 {
+	ethernet = <&enetc2>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi b/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi
index 49fffdb9cb..1d800dacef 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi
@@ -13,6 +13,10 @@
 	#include "fsl-sch-28021.dtsi"
 };
 
+&enetc2 {
+	status = "okay";
+};
+
 &mscc_felix {
 	status = "okay";
 };
@@ -40,3 +44,8 @@
 	phy-mode = "qsgmii";
 	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@0b}>;
 };
+
+&mscc_felix_port4 {
+	ethernet = <&enetc2>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi b/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi
index 8347462f4c..1fb2cdf0c2 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi
@@ -9,6 +9,10 @@
 #include "fsl-sch-30842.dtsi"
 };
 
+&enetc2 {
+	status = "okay";
+};
+
 &mscc_felix {
 	status = "okay";
 };
@@ -18,3 +22,8 @@
 	phy-mode = "sgmii-2500";
 	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@02}>;
 };
+
+&mscc_felix_port4 {
+	ethernet = <&enetc2>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi b/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi
index 6be3b5094c..2333f74e5a 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi
@@ -9,6 +9,10 @@
 #include "fsl-sch-30842.dtsi"
 };
 
+&enetc2 {
+	status = "okay";
+};
+
 &mscc_felix {
 	status = "okay";
 };
@@ -18,3 +22,8 @@
 	phy-mode = "sgmii-2500";
 	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@60/phy@02}>;
 };
+
+&mscc_felix_port4 {
+	ethernet = <&enetc2>;
+	status = "okay";
+};