From: Chen Baozi Date: Wed, 21 Jul 2021 06:11:26 +0000 (+0800) Subject: serial: pl011: Enable DEBUG_UART_PL011 in SPL X-Git-Url: http://git.dujemihanovic.xyz/img/static/%7B%7B%20%24image.RelPermalink%20%7D%7D?a=commitdiff_plain;h=91a043896dfb8544db00496bee08bcf59e449dc9;p=u-boot.git serial: pl011: Enable DEBUG_UART_PL011 in SPL Commit b81406db51a6 ("arm: serial: Add debug UART capability to the pl01x driver") add supports to use pl01x as a debug UART. However, due to CONFIG_IS_ENABLED macro requires CONFIG_SPL_* prefix, the _debug_uart_init() would not choose TYPE_PL011 in SPL build. This patch fixes the bug by judging CONFIG_DEBUG_UART_PL011 explicitly. Signed-off-by: Chen Baozi Reviewed-by: Simon Glass --- diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c index 8ff19acf33..67caa063c9 100644 --- a/drivers/serial/serial_pl01x.c +++ b/drivers/serial/serial_pl01x.c @@ -404,8 +404,12 @@ static void _debug_uart_init(void) { #ifndef CONFIG_DEBUG_UART_SKIP_INIT struct pl01x_regs *regs = (struct pl01x_regs *)CONFIG_DEBUG_UART_BASE; - enum pl01x_type type = CONFIG_IS_ENABLED(DEBUG_UART_PL011) ? - TYPE_PL011 : TYPE_PL010; + enum pl01x_type type; + + if (IS_ENABLED(CONFIG_DEBUG_UART_PL011)) + type = TYPE_PL011; + else + type = TYPE_PL010; pl01x_generic_serial_init(regs, type); pl01x_generic_setbrg(regs, type,