From: Jayesh Choudhary <j-choudhary@ti.com>
Date: Tue, 28 Mar 2023 13:02:01 +0000 (+0530)
Subject: arch: mach-k3: j721s2_init: Disable the firewalls
X-Git-Url: http://git.dujemihanovic.xyz/img/static/%7B%7B%20%24image.RelPermalink%20%7D%7D?a=commitdiff_plain;h=2e43ba78052825c62e3078e308d681da44ccdc8f;p=u-boot.git

arch: mach-k3: j721s2_init: Disable the firewalls

Some firewalls enabled by ROM are still left on. So some
address space is inaccessible to the bootloader. For example,
in OSPI boot mode we get an exception and the system hangs.
Therefore, disable all the firewalls left on by the ROM.

Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
---

diff --git a/arch/arm/mach-k3/j721s2_init.c b/arch/arm/mach-k3/j721s2_init.c
index 001d9466c2..712a7e253f 100644
--- a/arch/arm/mach-k3/j721s2_init.c
+++ b/arch/arm/mach-k3/j721s2_init.c
@@ -22,6 +22,51 @@
 #include <mmc.h>
 #include <remoteproc.h>
 
+struct fwl_data cbass_hc_cfg0_fwls[] = {
+	{ "PCIE0_CFG", 2577, 7 },
+	{ "EMMC8SS0_CFG", 2579, 4 },
+	{ "USB3SS0_CORE", 2580, 4 },
+	{ "USB3SS1_CORE", 2581, 1 },
+}, cbass_hc2_fwls[] = {
+	{ "PCIE0", 2547, 24 },
+	{ "HC2_WIZ16B8M4CT2", 2552, 1 },
+}, cbass_rc_cfg0_fwls[] = {
+	{ "EMMCSD4SS0_CFG", 2400, 4 },
+}, infra_cbass0_fwls[] = {
+	{ "PSC0", 5, 1 },
+	{ "PLL_CTRL0", 6, 1 },
+	{ "PLL_MMR0", 8, 26 },
+	{ "CTRL_MMR0", 9, 16 },
+	{ "GPIO0", 16, 1 },
+}, mcu_cbass0_fwls[] = {
+	{ "MCU_R5FSS0_CORE0", 1024, 4 },
+	{ "MCU_R5FSS0_CORE0_CFG", 1025, 3 },
+	{ "MCU_R5FSS0_CORE1", 1028, 4 },
+	{ "MCU_R5FSS0_CORE1_CFG", 1029, 1 },
+	{ "MCU_FSS0_CFG", 1032, 12 },
+	{ "MCU_FSS0_S1", 1033, 8 },
+	{ "MCU_FSS0_S0", 1036, 8 },
+	{ "MCU_PSROM49152X32", 1048, 1 },
+	{ "MCU_MSRAM128KX64", 1050, 8 },
+	{ "MCU_MSRAM128KX64_CFG", 1051, 1 },
+	{ "MCU_TIMER0", 1056, 1 },
+	{ "MCU_TIMER9", 1065, 1 },
+	{ "MCU_USART0", 1120, 1 },
+	{ "MCU_I2C0", 1152, 1 },
+	{ "MCU_CTRL_MMR0", 1200, 8 },
+	{ "MCU_PLL_MMR0", 1201, 3 },
+	{ "MCU_CPSW0", 1220, 2 },
+}, wkup_cbass0_fwls[] = {
+	{ "WKUP_PSC0", 129, 1 },
+	{ "WKUP_PLL_CTRL0", 130, 1 },
+	{ "WKUP_CTRL_MMR0", 131, 16 },
+	{ "WKUP_GPIO0", 132, 1 },
+	{ "WKUP_I2C0", 144, 1 },
+	{ "WKUP_USART0", 160, 1 },
+}, navss_cbass0_fwls[] = {
+	{ "NACSS_VIRT0", 6253, 1 },
+};
+
 static void ctrl_mmr_unlock(void)
 {
 	/* Unlock all WKUP_CTRL_MMR0 module registers */
@@ -150,6 +195,14 @@ void k3_spl_init(void)
 			if (ret)
 				panic("Failed to initialize clk-k3!\n");
 		}
+
+		remove_fwl_configs(cbass_hc_cfg0_fwls, ARRAY_SIZE(cbass_hc_cfg0_fwls));
+		remove_fwl_configs(cbass_hc2_fwls, ARRAY_SIZE(cbass_hc2_fwls));
+		remove_fwl_configs(cbass_rc_cfg0_fwls, ARRAY_SIZE(cbass_rc_cfg0_fwls));
+		remove_fwl_configs(infra_cbass0_fwls, ARRAY_SIZE(infra_cbass0_fwls));
+		remove_fwl_configs(mcu_cbass0_fwls, ARRAY_SIZE(mcu_cbass0_fwls));
+		remove_fwl_configs(wkup_cbass0_fwls, ARRAY_SIZE(wkup_cbass0_fwls));
+		remove_fwl_configs(navss_cbass0_fwls, ARRAY_SIZE(navss_cbass0_fwls));
 	}
 
 	/* Output System Firmware version info */