From: Paul Barker Date: Wed, 20 Nov 2024 09:48:29 +0000 (+0000) Subject: pinctrl: rzg2l: Support Ethernet TXC output enable X-Git-Url: http://git.dujemihanovic.xyz/img/static/%7B%7B%20%24.Site.BaseURL%20%7D%7Dposts/static/gitweb.css?a=commitdiff_plain;h=bba516a772853595901a7359209bc588d2bffda0;p=u-boot.git pinctrl: rzg2l: Support Ethernet TXC output enable On the RZ/G2L SoC family, the direction of the Ethernet TXC/TX_CLK signal is selectable to support an Ethernet PHY operating in either MII or RGMII mode. By default, the signal is configured as an input and MII mode is supported. The ETH_MODE register can be modified to configure this signal as an output to support RGMII mode. As this signal is be default an input, and can optionally be switched to an output, it maps neatly onto an `output-enable` property in the device tree. Signed-off-by: Paul Barker Reviewed-by: Marek Vasut --- diff --git a/drivers/pinctrl/renesas/rzg2l-pfc.c b/drivers/pinctrl/renesas/rzg2l-pfc.c index 0098e2d52d..af371bd0ff 100644 --- a/drivers/pinctrl/renesas/rzg2l-pfc.c +++ b/drivers/pinctrl/renesas/rzg2l-pfc.c @@ -180,7 +180,7 @@ static const u32 r9a07g044_gpio_configs[] = { RZG2L_GPIO_PORT_PACK(3, 0x21, RZG2L_MPXED_PIN_FUNCS), RZG2L_GPIO_PORT_PACK(2, 0x22, RZG2L_MPXED_PIN_FUNCS), RZG2L_GPIO_PORT_PACK(2, 0x23, RZG2L_MPXED_PIN_FUNCS), - RZG2L_GPIO_PORT_PACK(3, 0x24, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)), + RZG2L_GPIO_PORT_PACK(3, 0x24, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0) | PIN_CFG_OEN), RZG2L_GPIO_PORT_PACK(2, 0x25, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)), RZG2L_GPIO_PORT_PACK(2, 0x26, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)), RZG2L_GPIO_PORT_PACK(2, 0x27, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)), @@ -189,7 +189,7 @@ static const u32 r9a07g044_gpio_configs[] = { RZG2L_GPIO_PORT_PACK(2, 0x2a, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)), RZG2L_GPIO_PORT_PACK(2, 0x2b, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)), RZG2L_GPIO_PORT_PACK(2, 0x2c, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)), - RZG2L_GPIO_PORT_PACK(2, 0x2d, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)), + RZG2L_GPIO_PORT_PACK(2, 0x2d, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1) | PIN_CFG_OEN), RZG2L_GPIO_PORT_PACK(2, 0x2e, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)), RZG2L_GPIO_PORT_PACK(2, 0x2f, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)), RZG2L_GPIO_PORT_PACK(2, 0x30, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)), @@ -449,6 +449,32 @@ static int rzg2l_pinconf_set(struct udevice *dev, unsigned int pin_selector, break; } + case PIN_CONFIG_OUTPUT_ENABLE: { + u8 ch; + + if (!(cfg & PIN_CFG_OEN)) { + dev_err(dev, "pin does not support OEN\n"); + return -EINVAL; + } + + /* + * We can determine which Ethernet interface we're dealing with from + * the caps. + */ + if (cfg & PIN_CFG_IO_VMC_ETH0) + ch = 0; + else /* PIN_CFG_IO_VMC_ETH1 */ + ch = 1; + + dev_dbg(dev, "set ETH%u TXC OEN=%u\n", ch, argument); + if (argument) + clrbits_8(data->base + ETH_MODE, BIT(ch)); + else + setbits_8(data->base + ETH_MODE, BIT(ch)); + + break; + } + default: dev_err(dev, "Invalid pinconf parameter\n"); return -EOPNOTSUPP; @@ -542,6 +568,7 @@ static int rzg2l_get_pin_muxing(struct udevice *dev, unsigned int selector, static const struct pinconf_param rzg2l_pinconf_params[] = { { "input-enable", PIN_CONFIG_INPUT_ENABLE, 1 }, + { "output-enable", PIN_CONFIG_OUTPUT_ENABLE, 1 }, { "power-source", PIN_CONFIG_POWER_SOURCE, 3300 /* mV */ }, }; diff --git a/include/renesas/rzg2l-pfc.h b/include/renesas/rzg2l-pfc.h index d1015b1d2a..0c94487754 100644 --- a/include/renesas/rzg2l-pfc.h +++ b/include/renesas/rzg2l-pfc.h @@ -22,6 +22,7 @@ #define PIN_CFG_FILONOFF BIT(10) #define PIN_CFG_FILNUM BIT(11) #define PIN_CFG_FILCLKSEL BIT(12) +#define PIN_CFG_OEN BIT(13) #define RZG2L_MPXED_PIN_FUNCS (PIN_CFG_IOLH_A | \ PIN_CFG_SR | \ @@ -79,6 +80,7 @@ #define SD_CH(n) (0x3000 + (n) * 4) #define ETH_POC(ch) (0x300c + (ch) * 4) #define QSPI 0x3008 +#define ETH_MODE 0x3018 #define PVDD_1800 1 /* I/O domain voltage <= 1.8V */ #define PVDD_2500 2 /* I/O domain voltage 2.5V */