From: Marek Vasut <marex@denx.de>
Date: Fri, 29 Nov 2024 00:35:43 +0000 (+0100)
Subject: ARM: dts: imx: Enable PCIe and NVMe on Data Modul i.MX8M Mini eDM SBC
X-Git-Url: http://git.dujemihanovic.xyz/img/static/%7B%7B%20%24.Site.BaseURL%20%7D%7Dposts/static/gitweb.css?a=commitdiff_plain;h=4835efca7a004fab62853f3e6bbd2854d1df503b;p=u-boot.git

ARM: dts: imx: Enable PCIe and NVMe on Data Modul i.MX8M Mini eDM SBC

Enable PCIe/NVMe support on Data Modul i.MX8M Mini eDM SBC. Except for
the configuration options which are enabled, add slight adjustment
to board u-boot.dtsi, which is necessary as there is currently no
driver for the I2C PCIe clock generator. Since the generator is
strapped to be always on, it is possible to supplant the generator
functionality by fixed-clock.

Signed-off-by: Marek Vasut <marex@denx.de>
---

diff --git a/arch/arm/dts/imx8mm-data-modul-edm-sbc-u-boot.dtsi b/arch/arm/dts/imx8mm-data-modul-edm-sbc-u-boot.dtsi
index f5e98bf748..3a4f7d01b9 100644
--- a/arch/arm/dts/imx8mm-data-modul-edm-sbc-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-data-modul-edm-sbc-u-boot.dtsi
@@ -16,6 +16,12 @@
 		dmo,ram-coding-gpios = <&gpio2 8 0>, <&gpio2 1 0>, <&gpio2 0 0>;
 	};
 
+	clk_pcie100: clk-pcie100 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
 	wdt-reboot {
 		compatible = "wdt-reboot";
 		wdt = <&wdog1>;
@@ -35,6 +41,15 @@
 	bootph-pre-ram;
 };
 
+&pcie_phy {
+	clocks = <&clk_pcie100>;
+};
+
+&pcie0 {
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
+		 <&clk_pcie100>;
+};
+
 &pinctrl_hog_sbc {
 	bootph-pre-ram;
 };
diff --git a/configs/imx8mm_data_modul_edm_sbc_defconfig b/configs/imx8mm_data_modul_edm_sbc_defconfig
index 518243e651..66cb1331de 100644
--- a/configs/imx8mm_data_modul_edm_sbc_defconfig
+++ b/configs/imx8mm_data_modul_edm_sbc_defconfig
@@ -5,12 +5,18 @@ CONFIG_ARCH_IMX8M=y
 CONFIG_TARGET_IMX8MM_DATA_MODUL_EDM_SBC=y
 CONFIG_CI_UDC=y
 CONFIG_CLK_IMX8MM=y
+CONFIG_CMD_PCI=y
 CONFIG_DEFAULT_DEVICE_TREE="imx8mm-data-modul-edm-sbc"
 CONFIG_DEFAULT_FDT_FILE="imx8mm-data-modul-edm-sbc.dtb"
 CONFIG_DM_PMIC_BD71837=y
 CONFIG_DM_REGULATOR_BD71837=y
 CONFIG_IMX_CONFIG="board/data_modul/imx8mm_edm_sbc/imximage.cfg"
+CONFIG_NVME_PCI=y
+CONFIG_PCI=y
+CONFIG_PCIE_DW_IMX=y
+CONFIG_PHY=y
 CONFIG_PHYLIB=y
+CONFIG_PHY_IMX8M_PCIE=y
 CONFIG_PREBOOT="run dmo_preboot"
 CONFIG_SDP_LOADADDR=0x60000000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000