From: Lukasz Majewski <lukma@denx.de>
Date: Wed, 2 May 2018 14:10:50 +0000 (+0200)
Subject: bootcount: spl: Enable bootcount support in SPL
X-Git-Tag: v2025.01-rc5-pxa1908~4327
X-Git-Url: http://git.dujemihanovic.xyz/img/static/%7B%7B%20%24.Site.BaseURL%20%7D%7Dposts/html/index.html?a=commitdiff_plain;h=afa9609ecabc2135debe9d5329f72d58aea4ff05;p=u-boot.git

bootcount: spl: Enable bootcount support in SPL

New, SPL related config option - CONFIG_SPL_BOOTCOUNT_LIMIT has been
added to allow drivers/bootcount code re-usage in SPL.

This code is necessary to use and setup bootcount in SPL in the case of
falcon boot mode.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Alex Kiernan <alex.kiernan@gmail.com>
---

diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 259f96607e..431710a93b 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -54,6 +54,15 @@ config SPL_BOOTROM_SUPPORT
 	  BOOT_DEVICE_BOOTROM (or fall-through to the next boot device in the
 	  boot device list, if not implemented for a given board)
 
+config SPL_BOOTCOUNT_LIMIT
+	bool "Support bootcount in SPL"
+	depends on SPL_ENV_SUPPORT
+	help
+	  On some boards, which use 'falcon' mode, it is necessary to check
+	  and increment the number of boot attempts. Such boards do not
+	  use proper U-Boot for normal boot flow and hence needs those
+	  adjustments to be done in the SPL.
+
 config SPL_RAW_IMAGE_SUPPORT
 	bool "Support SPL loading and booting of RAW images"
 	default n if (ARCH_MX6 && (SPL_MMC_SUPPORT || SPL_SATA_SUPPORT))
diff --git a/drivers/Makefile b/drivers/Makefile
index edbcadf99b..b3f1b600a5 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_$(SPL_TPL_)TIMER) += timer/
 ifndef CONFIG_TPL_BUILD
 ifdef CONFIG_SPL_BUILD
 
+obj-$(CONFIG_SPL_BOOTCOUNT_LIMIT) += bootcount/
 obj-$(CONFIG_SPL_CPU_SUPPORT) += cpu/
 obj-$(CONFIG_SPL_CRYPTO_SUPPORT) += crypto/
 obj-$(CONFIG_SPL_GPIO_SUPPORT) += gpio/