]> git.dujemihanovic.xyz Git - u-boot.git/shortlog
u-boot.git
2019-01-28 Peng Fanarm: imx: build mach-imx for i.MX8
2019-01-28 Peng Fanimx8: scu: use dedicated MU for SPL
2019-01-28 Peng Fanimx8qxp: add SUPPORT_SPL option
2019-01-28 Fabio EstevamMAINTAINERS: imx: Change Fabio's email address
2019-01-28 Stefan Agnerconfigs: add default configuraiton for Colibri iMX7...
2019-01-28 Stefan Agnerconfigs: colibri_imx7: use distro defaults
2019-01-28 Stefan Agnerconfigs: colibri_imx7: use DFU for NAND instead of MMC
2019-01-28 Stefan Agnerconfigs: colibri_imx7: enable CAAM driver
2019-01-28 Stefan Agnercolibri_imx7: drop legacy usdhc support
2019-01-28 Stefan Agnerconfigs: colibri_imx7: use DM_MMC
2019-01-28 Stefan Agnerarm: dts: imx7: colibri: add usdhci peripherals to...
2019-01-28 Stefan Agnerconfigs: colibri_imx7: use separate device tree
2019-01-28 Stefan Agnerconfigs: colibri_imx7: enable DM for raw NAND devices
2019-01-28 Stefan Agnerarm: dts: imx7: colibri: split dt for raw NAND and...
2019-01-28 Stefan Agnercolibri_imx7: fix boot commands
2019-01-28 Fabio EstevamRevert "tools: imx8image: set dcd_skip to true"
2019-01-28 Heinrich Schuchardttools: imx8image: use correct printf escape sequence
2019-01-28 Olaf Mandelm53menlo: fix addmtd cmd in default environment
2019-01-28 Olaf Mandelm53menlo: fix splashfile location
2019-01-28 Fabio Estevampico-imx7d: Add LCD support
2019-01-28 Fabio Estevammx7: Do not call lcdif_power_down() in the SPL case
2019-01-28 Martyn Welchimx: Add PHYTEC phyBOARD-i.MX6UL-Segin
2019-01-28 Martyn WelchEnable FEC driver to retrieve PHY address from device...
2019-01-28 Breno Matheus... imx: hab: Convert non-NULL IVT DCD pointer warning...
2019-01-24 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-sunxi
2019-01-24 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-net
2019-01-24 Tom RiniMerge tag 'mpc85xx-for-v2019.04-rc1' of git://git.denx...
2019-01-24 Valentin-catalin... net: phy: aquantia: Print information on config
2019-01-24 Valentin-catalin... net: phy: aquantia: Enable autoneg when on USXGMII
2019-01-24 Chris Packhamnet: remove CONFIG_MCAST_TFTP
2019-01-24 Chris Packhamnet: move ether_crc to tsec driver
2019-01-24 Carlo Caionenet: phy: realtek: Add functions to read PHY's extended...
2019-01-24 Ramon Friednet: macb: fix mapping of registers
2019-01-24 Aditya Prayoganet: mvneta: Add GPIO configuration support
2019-01-24 Chris Packhamnet: mvgbe: fallback phy-mode to GMII
2019-01-24 Andreas Pretzschnet: phy: micrel: fix KSZ9031 clock skew for values...
2019-01-24 Simon Goldschmidtnet: fix env flags for eth10addr and above
2019-01-24 Simon Goldschmidtnet: remove duplicate definition of ETHADDR_WILDCARD
2019-01-24 Thomas RIENOESSLnet: explicitly assign errno to return code in case...
2019-01-24 Baruch Siachnet: mvpp2: mdio device per port
2019-01-24 Baruch Siachnet: mvpp2: fix lookup of mdio registers base address
2019-01-24 Simon Goldschmidtnet: designware: clear padding bytes
2019-01-24 Simon Goldschmidtnet: designware: fix tx packet length
2019-01-24 Pankaj Bansalnet: phy: Add clause 45 identifier to phy_device
2019-01-24 Tom RiniMerge tag 'xilinx-for-v2019.04' of git://git.denx.de...
2019-01-24 Michal SimekARM: zynq: Convert Topic Miami to DM_I2C
2019-01-24 Michal SimekARM: zynq: Disable i2c for Zybo/Zybo Z7
2019-01-24 Michal SimekARM: zynq: Remove unused GEM addresses
2019-01-24 Michal Simekarm64: zynqmp: Remove unused GEM addresses
2019-01-24 Anton Gerasimovzynq: Kconfig: extend the bootstrap malloc() pool
2019-01-24 Mike Looijmansboard: topic-miamiplus: Run IO PLL at 1000 MHz
2019-01-24 Mike Looijmanstopic-miamiplus: Run CPU at 800MHz for speedgrade-2
2019-01-24 Michal Simeki2c: cdns: Convert to livetree function
2019-01-24 Michal Simekarm64: versal: Enable dm command
2019-01-24 Michal Simekarm64: versal: Enable i2c cadence controller and i2c...
2019-01-24 Michal Simekarm64: zynqmp: Move SoC sources to mach-zynqmp
2019-01-24 Michal SimekARM: zynq: Convert all boards to OF_SEPARATE
2019-01-24 Siva Durga... arm: zynq: Enable CONFIG_REMAKE_ELF
2019-01-24 Michal Simekarm64: zynqmp: Convert all reference boards to OF_SEPARATE
2019-01-24 Michal Simekarm64: zynqmp: Align u-boot-spl.bin for boot.bin creation
2019-01-24 Michal Simektools: zynqmpimage: Align image_size/image_stored_size
2019-01-24 Michal Simektravis: Wire Xilinx Versal Virt platform
2019-01-24 Michal Simekarm64: zynqmp: Disable MMC for for zc12xx_revA boards
2019-01-24 Michal Simekarm64: zynqmp: Enable FPGA_LOAD_SECURE command
2019-01-24 Michal Simekarm64: zynqmp: Enable ISSI flash for some platforms
2019-01-24 Michal Simekarm64: zynqmp: Enable SPI on several boards
2019-01-24 Michal Simekarm64: zynqmp: Setup proper SPI dependency
2019-01-24 Michal SimekARM: zynqmp_r5: Setup DM_ETH/MMC if NET/MMC is enabled
2019-01-24 Siva Durga... arm64: zynqmp: Enable net configs for zc1275
2019-01-24 Michal Simekarm64: zynqmp: Setup DM_ETH/MMC if NET/MMC is enabled
2019-01-24 Michal Simekarm64: versal: Setup DM_ETH/MMC if NET/MMC is enabled
2019-01-24 Luca Ceresolifpga: zynqmp: show an error message when FPGA programmi...
2019-01-24 Michal Simekarm64: zynqmp: Fix tcminit help text alignment
2019-01-24 Siva Durga... net: phy: Move fixed link code to separate routine
2019-01-24 Siva Durga... arm64: zynqmp: Fix mmc node names to be in sync with...
2019-01-24 Stefan Theilzynq-gem: Use appropriate cache flush/invalidate for...
2019-01-24 Michal Simekarm64: zynqmp: Protect board_late_init function
2019-01-24 Michal Simekarm64: zynqmp: Do not protect zynqmp_pmufw_version()
2019-01-24 Michal Simekmmc: zynq: Remove unused pwrseq variable
2019-01-24 Michal Simekarm64: zynqmp: Enable 2 NAND chips for zc1751 dc2
2019-01-24 T Karthik Reddymtd: nand: arasan_nfc: Add support for nand multi chip...
2019-01-24 Michael Trettertools: zynqmpimage: round up partition size
2019-01-23 Tom RiniMerge tag 'mips-pull-2019-01-23' of git://git.denx...
2019-01-23 Joakim Tjernlundmpc85xx: Add support for -msingle-pic-base
2019-01-23 Horatiu VulturMSCC: Add board support for Serval SoC family.
2019-01-23 Horatiu VulturMSCC: Add device tree for Serval pcb106 board
2019-01-23 Horatiu VulturMSCC: add device tree for Serval pcb105 board
2019-01-23 Horatiu VulturMSCC: Add support for Serval SoC family.
2019-01-23 Horatiu Vulturpinctrl: mscc: Add gpio and pinctrl for Serval SoC...
2019-01-23 Horatiu VulturMSCC: Add board support for Servalt SoC family
2019-01-23 Horatiu VulturMSCC: Add support for Servalt SoC family.
2019-01-23 Horatiu Vulturpinctrl: mscc: Add gpio and pinctrl for Servalt SoC...
2019-01-23 Gregory CLEMENTconfigs: mscc_ocelot: add network support
2019-01-23 Gregory CLEMENTMIPS: mscc: ocelot: add switch reset support
2019-01-23 Gregory CLEMENTnet: add MSCC Ocelot switch support
2019-01-23 Gregory CLEMENTMIPS: mscc: ocelot: Add ethernet nodes for Ocelot
2019-01-23 Tom RiniMerge git://git.denx.de/u-boot-nds32
2019-01-22 Rick Chennds32: dts: Fix mmc node compatible string
2019-01-22 Rick Chennds32: Fix boot fail issue when build with elf-mculib.
2019-01-22 Rick Chennds32: Generate SW fpu instruction.
next