]> git.dujemihanovic.xyz Git - u-boot.git/shortlog
u-boot.git
2017-03-19 Fabio Estevammx7: Fix the get_cpu_speed_grade_hz() return values
2017-03-19 Fabio Estevammx7: Fix speed grade entry
2017-03-19 Sébastien Szymanskiarm: dts: imx6ul: add usbotg aliases
2017-03-19 Sébastien Szymanskiarm: i.MX6UL: add Armadeus Systems OPOS6UL SoM and...
2017-03-19 Sébastien Szymanskidm: imx: serial: add i.MX6UL support
2017-03-19 Lukasz MajewskiMCCMON6: defconfig: Move 'quiet' console parameter...
2017-03-17 Markus Niebelarm: imx6: tqma6: add support for TQMa6DL variant
2017-03-17 Markus Niebelarm: imx6: tqma6: use CONFIG_TQM6x for SOM specific...
2017-03-17 Jagan Tekii.MX6Q: isiot: Switch the mmc env based on devno
2017-03-17 Jagan Tekii.MX6Q: icorem6_rqs: Add mmc_late_init
2017-03-17 Jagan Tekii.MX6Q: icorem6_rqs: Add modeboot env via board_late_init
2017-03-17 Jagan Tekiimx6: icorem6_rqs: Add eMMC boot support
2017-03-17 Markus Niebelmx6: tqma6: clear enet clk sel for mba6
2017-03-17 Markus Niebelimx6: tqma6: adjust ethernet phy reset delay
2017-03-17 Markus Niebelimx6: tqma6: disable spi CS unused in U-Boot
2017-03-17 Markus Niebelimx6: tqma6: use lower driver stength for I2C pins
2017-03-17 Markus Niebelimx6: tqma6: implement power_init_board
2017-03-17 Jagan Tekiimx6: icorem6_rqs: Update SPL board boot order for...
2017-03-17 Jagan Tekiarm: dts: imx6qdl-icore-rqs: Add eMMC node
2017-03-17 Jagan Tekii.MX6UL: isiot: Switch the mmc env based on devno
2017-03-17 Jagan Tekii.MX6UL: isiot: Add mmc_late_init
2017-03-17 Jagan Tekii.MX6UL: isiot: Add modeboot env via board_late_init
2017-03-17 Jagan Tekii.MX6UL: isiot: Add eMMC boot support
2017-03-17 Jagan Tekiimx6: isiotmx6ul: Update SPL board boot order for eMMC
2017-03-17 Jagan Tekiimx6: Add src_base structure define macro
2017-03-17 Jagan Tekiimx: Use IMX6_BMODE_* macros instead of numericals
2017-03-17 Jagan Tekiimx: spl: Update NAND bootmode detection bit
2017-03-17 Jagan Tekiimx6: Add imx6_src_get_boot_mode
2017-03-17 Jagan Tekii.MX6: engicam: Include dts files under MAINTAINERS
2017-03-17 Jagan Tekiimx6ul: isiotmx6ul: Enable I2C support
2017-03-17 Jagan Tekiimx6: isiotmx6ul: Add nandboot env support
2017-03-17 Jagan Tekiimx6: isiotmx6ul: Add NAND support
2017-03-17 Jagan Tekiimx6: isiotmx6ul: Add FEC support
2017-03-17 Jagan Tekiarm: dts: imx6ul-isiot: Add FEC node
2017-03-17 Jagan Tekiimx6: isiotmx6ul: Add I2C support
2017-03-17 Jagan Tekiarm: dts: imx6ul-isiot: Add I2C nodes
2017-03-17 Jagan Tekiarm: imx6ul: Add Engicam Is.IoT MX6UL Starter Kit initi...
2017-03-17 Jagan Tekiconfigs: imx6: Don't define USDHC2_BASE_ADDR
2017-03-17 Peng Fanimx: mx7ulp_evk: enable mmc/regulator support
2017-03-17 Peng Fanimx: imx7ulp: add EVK board support
2017-03-17 Peng Fanmmc: fsl_esdhc: support i.MX7ULP
2017-03-17 Peng Fanarm: dts: add i.MX7ULP dtsi file
2017-03-17 Peng Fanmx7ulp: Add HAB boot support
2017-03-17 Peng Fanserial: lpuart: add i.MX7ULP support
2017-03-17 Peng Fanserial: lpuart: restructure lpuart driver
2017-03-17 Peng Fani2c: lpi2c: add lpi2c driver for i.MX7ULP
2017-03-17 Peng Fanpinctrl: Add i.MX7ULP pinctrl driver
2017-03-17 Ye Liwdog: Add the watchdog driver for MX7ULP.
2017-03-17 Ye Limx7ulp: Add iomux pins header file
2017-03-17 Peng Fanmxc_ocotp: Update driver to support OCOTP controller...
2017-03-17 Peng Fangpio: Add Rapid GPIO2P driver for i.MX7ULP
2017-03-17 Ye Liimx: mx7ulp: Implement the clock functions for i2c...
2017-03-17 Peng Fanimx: mx7ulp: Add soc level initialization codes and...
2017-03-17 Peng Fanimx: mx7ulp: Add clock framework and functions
2017-03-17 Peng Fanimx: mx7ulp: add iomux driver to support IOMUXC0 and...
2017-03-17 Peng Fanimx: mx7ulp: add registers header file
2017-03-17 Peng Fanimx: mx7ulp: Add mx7ulp to Kconfig
2017-03-15 Masahiro Yamadaarm64: booti: allow to place kernel image anywhere...
2017-03-15 Masahiro Yamadatools: fix cross-compiling tools when HOSTCC is overridden
2017-03-15 Masahiro Yamadatiny-printf: add static to locally used functions
2017-03-15 Ladislav Michligep00x0: fixup FDT according to detected flash type
2017-03-15 Ladislav Michligep00x0: disable environment
2017-03-15 Patrice Chotardboard: Add STMicroelectronics STiH410-B2260 support
2017-03-15 Patrice ChotardSTiH410-B2260: Add device tree
2017-03-15 Patrice ChotardSTiH410: Add STi pinctrl driver
2017-03-15 Patrice ChotardSTiH410: Add STi SDHCI driver
2017-03-15 Patrice Chotardgpio: do not include <asm/arch/gpio.h> for ARCH_STI
2017-03-15 Patrice ChotardSTiH410: Add STi serial driver
2017-03-15 Patrice ChotardSTiH410: Add STi sysreset driver
2017-03-15 Patrice ChotardSTiH410: Add STi timer driver
2017-03-15 Patrice Chotardarm: Add support for STMicroelectronics STiH410 soc
2017-03-15 Phil Edworthyarmv7m: Add SysTick timer driver
2017-03-15 Lokesh Vutlatools: omapimage: Fix size in header
2017-03-15 Siarhei Siamashkaarm: omap3: Bring back ARM errata workaround 725233
2017-03-15 Siarhei Siamashkaarm: omap3: Compile clock.c with -marm option to unbrea...
2017-03-15 Tom Riniomap3_overo: Reduce SPL size
2017-03-13 Masahiro YamadaARM: dts: uniphier: more re-sync DT with Linux
2017-03-13 Masahiro YamadaARM: dts: uniphier: fix no unit name warnings
2017-03-13 Masahiro YamadaARM: dts: uniphier: remove skeleton.dtsi inclusion
2017-03-13 Masahiro YamadaARM: uniphier: set DRAM_SPARSE flag for LD21 boards
2017-03-13 Tom RiniPrepare v2017.03
2017-03-13 Tom Riniscripts/config_whitelist.txt: Regenerate
2017-03-13 Tom Riniconfigs: Re-sync
2017-03-12 Matthijs van... arm: omap-common: Fix typo in CONFIG_OMAP54XX guard
2017-03-12 Jörg Krausetools: binman: change shebang from python into python2
2017-03-12 Ladislav Michlarm: OMAP2+: nandecc: propagate error to command return...
2017-03-10 Tom RiniMerge branch 'pmic' of git://git.denx.de/u-boot-mmc
2017-03-10 Tom RiniARM: Migrate errata to Kconfig
2017-03-10 Tom Riniomap4: Migrate to using imply
2017-03-10 Tom Riniomap3: Migrate to using imply
2017-03-10 Tom RiniTI: Migrate board/ti/common/Kconfig to imply
2017-03-10 Tom Riniam335x_evm: Switch to using imply keyword
2017-03-10 Tom Rinikconfiglib.py: Kludge in 'imply' support
2017-03-10 Ryan Harkindo_smhload: fix return code
2017-03-09 Tom RiniFreescale/NXP: Migrate CONFIG_FSL_CAAM to defconfigs
2017-03-09 Patrick Delaunaytools: Remove CONFIG_SYS_TEXT_BASE in Makefile
2017-03-09 Masahiro Yamadakbuild: turn of dtc unit address warnings by default
2017-03-09 Rask Ingemann... sunxi: power: axp809.c: Fix aldo1-2 being disabled...
2017-03-08 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-video
2017-03-08 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-net
next