From f38956a687c42db8d9736e09df2d68705369950e Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Sun, 29 Sep 2024 19:49:49 -0600 Subject: [PATCH] include: Use CONFIG_XPL_BUILD instead of CONFIG_SPL_BUILD Use the new symbol to refer to any 'SPL' build, including TPL and VPL Signed-off-by: Simon Glass --- include/asm-generic/global_data.h | 2 +- include/bootcount.h | 4 ++-- include/config_distro_bootcmd.h | 10 +++++----- include/configs/P1010RDB.h | 4 ++-- include/configs/am335x_evm.h | 4 ++-- include/configs/am335x_guardian.h | 4 ++-- include/configs/am335x_shc.h | 4 ++-- include/configs/am43xx_evm.h | 4 ++-- include/configs/am57xx_evm.h | 2 +- include/configs/capricorn-common.h | 4 ++-- include/configs/cgtqmx8.h | 2 +- include/configs/da850evm.h | 2 +- include/configs/dra7xx_evm.h | 4 ++-- include/configs/ds116.h | 4 ++-- include/configs/ds414.h | 4 ++-- include/configs/gardena-smart-gateway-mt7688.h | 2 +- include/configs/imx6q-bosch-acc.h | 2 +- include/configs/imx6ulz_smm_m2.h | 4 ++-- include/configs/imx8mm-cl-iot-gate.h | 2 +- include/configs/imx8mm_beacon.h | 2 +- include/configs/imx8mm_data_modul_edm_sbc.h | 2 +- include/configs/imx8mm_evk.h | 2 +- include/configs/imx8mm_icore_mx8mm.h | 4 ++-- include/configs/imx8mm_phg.h | 2 +- include/configs/imx8mm_venice.h | 2 +- include/configs/imx8mp_rsb3720.h | 2 +- include/configs/imx8mq_cm.h | 2 +- include/configs/imx8mq_evk.h | 2 +- include/configs/imx8mq_phanbell.h | 2 +- include/configs/imx8mq_reform2.h | 2 +- include/configs/imx8qm_mek.h | 2 +- include/configs/imx8qxp_mek.h | 2 +- include/configs/imx8ulp_evk.h | 2 +- include/configs/imx93_evk.h | 2 +- include/configs/kontron-sl-mx8mm.h | 4 ++-- include/configs/kontron_pitx_imx8m.h | 2 +- include/configs/librem5.h | 2 +- include/configs/linkit-smart-7688.h | 2 +- include/configs/ls1043a_common.h | 6 +++--- include/configs/ls1046a_common.h | 6 +++--- include/configs/ls1088a_common.h | 2 +- include/configs/msc_sm2s_imx8mp.h | 2 +- include/configs/mt7621.h | 2 +- include/configs/mt7628.h | 2 +- include/configs/n2350.h | 4 ++-- include/configs/p1_p2_rdb_pc.h | 4 ++-- include/configs/phycore_imx8mm.h | 2 +- include/configs/pico-imx8mq.h | 2 +- include/configs/rk3399_common.h | 4 ++-- include/configs/rockchip-common.h | 2 +- include/configs/socfpga_common.h | 2 +- include/configs/stm32mp15_common.h | 4 ++-- include/configs/stm32mp15_dh_dhsom.h | 2 +- include/configs/ti_omap3_common.h | 2 +- include/configs/ti_omap4_common.h | 2 +- include/configs/turris_1x.h | 4 ++-- include/configs/turris_omnia.h | 4 ++-- include/configs/verdin-imx8mm.h | 2 +- include/configs/verdin-imx8mp.h | 4 ++-- include/configs/vining_2000.h | 2 +- include/configs/xilinx_zynqmp.h | 2 +- include/configs/zynq-common.h | 4 ++-- include/env.h | 2 +- include/env_callback.h | 2 +- include/fdtdec.h | 2 +- include/image-android-dt.h | 2 +- include/iotrace.h | 2 +- include/linux/kconfig.h | 18 +++++++++--------- include/mmc.h | 2 +- include/mtd/cfi_flash.h | 2 +- include/net.h | 6 +++--- include/part.h | 2 +- include/sdp.h | 2 +- include/search.h | 2 +- include/spl.h | 14 +++++++------- include/stdio.h | 2 +- include/sunxi_gpio.h | 2 +- include/upl.h | 4 ++-- include/vbe.h | 2 +- 79 files changed, 125 insertions(+), 125 deletions(-) diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h index d6c15e2c40..644a0d7787 100644 --- a/include/asm-generic/global_data.h +++ b/include/asm-generic/global_data.h @@ -55,7 +55,7 @@ struct global_data { * @cur_serial_dev: current serial device */ struct udevice *cur_serial_dev; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /** * @jt: jump table * diff --git a/include/bootcount.h b/include/bootcount.h index bc06e17c9f..847c0f02d9 100644 --- a/include/bootcount.h +++ b/include/bootcount.h @@ -120,13 +120,13 @@ static inline void bootcount_inc(void) return; } -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* Only increment bootcount when no bootcount support in SPL */ #if !defined(CONFIG_SPL_BOOTCOUNT_LIMIT) && !defined(CONFIG_TPL_BOOTCOUNT_LIMIT) bootcount_store(++bootcount); #endif env_set_ulong("bootcount", bootcount); -#endif /* !CONFIG_SPL_BUILD */ +#endif /* !CONFIG_XPL_BUILD */ } #else diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h index 2a136b96a6..0a4e4b8ff8 100644 --- a/include/config_distro_bootcmd.h +++ b/include/config_distro_bootcmd.h @@ -63,7 +63,7 @@ #define BOOTENV_SHARED_MMC BOOTENV_SHARED_BLKDEV(mmc) #define BOOTENV_DEV_MMC BOOTENV_DEV_BLKDEV #define BOOTENV_DEV_NAME_MMC BOOTENV_DEV_NAME_BLKDEV -#elif defined(CONFIG_SPL_BUILD) +#elif defined(CONFIG_XPL_BUILD) #define BOOTENV_SHARED_MMC #define BOOTENV_DEV_MMC BOOTENV_DEV_BLKDEV_NONE #define BOOTENV_DEV_NAME_MMC BOOTENV_DEV_NAME_BLKDEV_NONE @@ -198,7 +198,7 @@ #define BOOTENV_SHARED_SATA BOOTENV_SHARED_BLKDEV(sata) #define BOOTENV_DEV_SATA BOOTENV_DEV_BLKDEV #define BOOTENV_DEV_NAME_SATA BOOTENV_DEV_NAME_BLKDEV -#elif defined(CONFIG_SPL_BUILD) +#elif defined(CONFIG_XPL_BUILD) #define BOOTENV_SHARED_SATA #define BOOTENV_DEV_SATA BOOTENV_DEV_BLKDEV_NONE #define BOOTENV_DEV_NAME_SATA BOOTENV_DEV_NAME_BLKDEV_NONE @@ -305,7 +305,7 @@ BOOTENV_SHARED_BLKDEV_BODY(usb) #define BOOTENV_DEV_USB BOOTENV_DEV_BLKDEV #define BOOTENV_DEV_NAME_USB BOOTENV_DEV_NAME_BLKDEV -#elif defined(CONFIG_SPL_BUILD) +#elif defined(CONFIG_XPL_BUILD) #define BOOTENV_RUN_NET_USB_START #define BOOTENV_SHARED_USB #define BOOTENV_DEV_USB BOOTENV_DEV_BLKDEV_NONE @@ -412,7 +412,7 @@ "\0" #define BOOTENV_DEV_NAME_DHCP(devtypeu, devtypel, instance) \ "dhcp " -#elif defined(CONFIG_SPL_BUILD) +#elif defined(CONFIG_XPL_BUILD) #define BOOTENV_DEV_DHCP BOOTENV_DEV_BLKDEV_NONE #define BOOTENV_DEV_NAME_DHCP BOOTENV_DEV_NAME_BLKDEV_NONE #else @@ -433,7 +433,7 @@ "fi\0" #define BOOTENV_DEV_NAME_PXE(devtypeu, devtypel, instance) \ "pxe " -#elif defined(CONFIG_SPL_BUILD) +#elif defined(CONFIG_XPL_BUILD) #define BOOTENV_DEV_PXE BOOTENV_DEV_BLKDEV_NONE #define BOOTENV_DEV_NAME_PXE BOOTENV_DEV_NAME_BLKDEV_NONE #else diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index 9efae58ce9..20fded56b7 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -43,7 +43,7 @@ #define CFG_SYS_NAND_U_BOOT_SIZE (576 << 10) #define CFG_SYS_NAND_U_BOOT_DST (0x11000000) #define CFG_SYS_NAND_U_BOOT_START (0x11000000) -#elif defined(CONFIG_SPL_BUILD) +#elif defined(CONFIG_XPL_BUILD) #define CFG_SYS_NAND_U_BOOT_SIZE (128 << 10) #define CFG_SYS_NAND_U_BOOT_DST 0xD0000000 #define CFG_SYS_NAND_U_BOOT_START 0xD0000000 @@ -290,7 +290,7 @@ extern unsigned long get_sdram_size(void); /* * Config the L2 Cache as L2 SRAM */ -#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) #define CFG_SYS_INIT_L2_ADDR 0xD0000000 #define CFG_SYS_INIT_L2_ADDR_PHYS CFG_SYS_INIT_L2_ADDR diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 67f4656253..19d3c72a6f 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -75,7 +75,7 @@ #include -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #include #define CFG_EXTRA_ENV_SETTINGS \ @@ -181,7 +181,7 @@ #endif /* !CONFIG_MTD_RAW_NAND */ /* USB Device Firmware Update support */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #define DFUARGS \ DFU_ALT_INFO_EMMC \ DFU_ALT_INFO_MMC \ diff --git a/include/configs/am335x_guardian.h b/include/configs/am335x_guardian.h index a8fa61c7e5..96efd38594 100644 --- a/include/configs/am335x_guardian.h +++ b/include/configs/am335x_guardian.h @@ -16,7 +16,7 @@ #define V_OSCK 24000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK) -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #define MEM_LAYOUT_ENV_SETTINGS \ "scriptaddr=0x80000000\0" \ @@ -70,7 +70,7 @@ "setenv boot_syslinux_conf \"extlinux/extlinux.conf\"; " \ "run bootcmd_ubifs0;\0" -#endif /* ! CONFIG_SPL_BUILD */ +#endif /* ! CONFIG_XPL_BUILD */ #define SPLASH_SCREEN_NAND_PART "nand0,10" #define SPLASH_SCREEN_BMP_FILE_SIZE 0x26000 diff --git a/include/configs/am335x_shc.h b/include/configs/am335x_shc.h index dedef91ba5..55d5190b22 100644 --- a/include/configs/am335x_shc.h +++ b/include/configs/am335x_shc.h @@ -20,7 +20,7 @@ #define V_OSCK 24000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK) -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #define CFG_EXTRA_ENV_SETTINGS \ "loadaddr=0x80200000\0" \ "kloadaddr=0x84000000\0" \ @@ -117,7 +117,7 @@ "setenv mmcpart 5; " \ "fi; " \ "setenv mmcroot /dev/mmcblk${mmcdev}p${mmcpart};\0" -#endif /* #ifndef CONFIG_SPL_BUILD */ +#endif /* #ifndef CONFIG_XPL_BUILD */ #if defined CONFIG_SHC_NETBOOT /* Network Boot */ diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index 87ffa769d1..036995cbb4 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -35,7 +35,7 @@ /* NS16550 Configuration */ #define CFG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* USB Device Firmware Update support */ #define DFUARGS \ "dfu_bufsiz=0x10000\0" \ @@ -63,7 +63,7 @@ #include -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #include #define CFG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h index 4b4362ccfd..aa31f3b05a 100644 --- a/include/configs/am57xx_evm.h +++ b/include/configs/am57xx_evm.h @@ -18,7 +18,7 @@ #define CFG_SYS_NS16550_COM2 UART2_BASE /* UART2 */ #define CFG_SYS_NS16550_COM3 UART3_BASE /* UART3 */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #define DFUARGS \ "dfu_bufsiz=0x10000\0" \ DFU_ALT_INFO_MMC \ diff --git a/include/configs/capricorn-common.h b/include/configs/capricorn-common.h index 9dcacad2fc..1f61b2b6af 100644 --- a/include/configs/capricorn-common.h +++ b/include/configs/capricorn-common.h @@ -13,10 +13,10 @@ #include "siemens-env-common.h" /* SPL config */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define CFG_MALLOC_F_ADDR 0x00120000 -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ /* ENET1 connects to base board and MUX with ESAI */ #define CFG_FEC_ENET_DEV 1 diff --git a/include/configs/cgtqmx8.h b/include/configs/cgtqmx8.h index 98d4d8cf4b..0d338389cb 100644 --- a/include/configs/cgtqmx8.h +++ b/include/configs/cgtqmx8.h @@ -11,7 +11,7 @@ #include #include -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define CFG_MALLOC_F_ADDR 0x00120000 #endif diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 416aa96366..8db849c6d0 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -157,7 +157,7 @@ "console=ttyS2,115200n8\0" \ "hwconfig=dsp:wake=yes" -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* defines for SPL */ #endif diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 633ec1f32f..96dcd731cb 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -28,7 +28,7 @@ #define CFG_SYS_NS16550_COM2 UART2_BASE /* UART2 */ #define CFG_SYS_NS16550_COM3 UART3_BASE /* UART3 */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #define DFUARGS \ "dfu_bufsiz=0x10000\0" \ DFU_ALT_INFO_MMC \ @@ -37,7 +37,7 @@ DFU_ALT_INFO_QSPI #endif -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #ifdef CONFIG_SPL_DFU #define DFUARGS \ "dfu_bufsiz=0x10000\0" \ diff --git a/include/configs/ds116.h b/include/configs/ds116.h index c232659681..2f2bc43269 100644 --- a/include/configs/ds116.h +++ b/include/configs/ds116.h @@ -18,7 +18,7 @@ */ #include "mv-common.h" -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #define KERNEL_ADDR_R __stringify(0x1000000) #define FDT_ADDR_R __stringify(0x2000000) @@ -39,6 +39,6 @@ "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \ "console=ttyS0,115200\0" -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ #endif /* _CONFIG_DS116_H */ diff --git a/include/configs/ds414.h b/include/configs/ds414.h index 9525657558..431a78de41 100644 --- a/include/configs/ds414.h +++ b/include/configs/ds414.h @@ -43,7 +43,7 @@ */ #include "mv-common.h" -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #define KERNEL_ADDR_R __stringify(0x1000000) #define FDT_ADDR_R __stringify(0x2000000) @@ -80,6 +80,6 @@ "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \ "console=ttyS0,115200\0" -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ #endif /* _CONFIG_SYNOLOGY_DS414_H */ diff --git a/include/configs/gardena-smart-gateway-mt7688.h b/include/configs/gardena-smart-gateway-mt7688.h index 1b97ae22fc..a89d298b52 100644 --- a/include/configs/gardena-smart-gateway-mt7688.h +++ b/include/configs/gardena-smart-gateway-mt7688.h @@ -15,7 +15,7 @@ #define CFG_SYS_UBOOT_BASE 0 /* Serial SPL */ -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_SERIAL) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_SERIAL) #define CFG_SYS_NS16550_CLK 40000000 #define CFG_SYS_NS16550_COM1 0xb0000c00 #endif diff --git a/include/configs/imx6q-bosch-acc.h b/include/configs/imx6q-bosch-acc.h index fab5063b73..64ddbf711d 100644 --- a/include/configs/imx6q-bosch-acc.h +++ b/include/configs/imx6q-bosch-acc.h @@ -92,7 +92,7 @@ /* SPL */ #ifdef CONFIG_SPL -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define CFG_SYS_FSL_USDHC_NUM 2 #ifdef CONFIG_SYS_BOOT_EMMC diff --git a/include/configs/imx6ulz_smm_m2.h b/include/configs/imx6ulz_smm_m2.h index 9da98d0af2..44a3fc02e8 100644 --- a/include/configs/imx6ulz_smm_m2.h +++ b/include/configs/imx6ulz_smm_m2.h @@ -14,14 +14,14 @@ #define CFG_MXC_UART_BASE UART4_BASE -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #define BOOT_TARGET_DEVICES(func) \ func(NAND, nand, 0) \ #include -#endif /* !CONFIG_SPL_BUILD */ +#endif /* !CONFIG_XPL_BUILD */ #define MEM_LAYOUT_ENV_SETTINGS \ "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ diff --git a/include/configs/imx8mm-cl-iot-gate.h b/include/configs/imx8mm-cl-iot-gate.h index 146f794571..6ed4a6fd3f 100644 --- a/include/configs/imx8mm-cl-iot-gate.h +++ b/include/configs/imx8mm-cl-iot-gate.h @@ -14,7 +14,7 @@ #define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CFG_MALLOC_F_ADDR 0x912000 /* For RAW image gives a error info not panic */ diff --git a/include/configs/imx8mm_beacon.h b/include/configs/imx8mm_beacon.h index fa20651d2d..2ec7f3d8b6 100644 --- a/include/configs/imx8mm_beacon.h +++ b/include/configs/imx8mm_beacon.h @@ -21,7 +21,7 @@ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #endif -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CFG_MALLOC_F_ADDR 0x930000 /* For RAW image gives a error info not panic */ diff --git a/include/configs/imx8mm_data_modul_edm_sbc.h b/include/configs/imx8mm_data_modul_edm_sbc.h index 9a5e5bd009..d323f84ac7 100644 --- a/include/configs/imx8mm_data_modul_edm_sbc.h +++ b/include/configs/imx8mm_data_modul_edm_sbc.h @@ -10,7 +10,7 @@ #include #include -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define CFG_MALLOC_F_ADDR 0x930000 /* For RAW image gives a error info not panic */ diff --git a/include/configs/imx8mm_evk.h b/include/configs/imx8mm_evk.h index 9dd63fc119..3bbbd900dd 100644 --- a/include/configs/imx8mm_evk.h +++ b/include/configs/imx8mm_evk.h @@ -22,7 +22,7 @@ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #endif -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CFG_MALLOC_F_ADDR 0x930000 /* For RAW image gives a error info not panic */ diff --git a/include/configs/imx8mm_icore_mx8mm.h b/include/configs/imx8mm_icore_mx8mm.h index 2158b0af74..145dab9121 100644 --- a/include/configs/imx8mm_icore_mx8mm.h +++ b/include/configs/imx8mm_icore_mx8mm.h @@ -13,11 +13,11 @@ #define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ # define CFG_MALLOC_F_ADDR 0x930000 /* For RAW image gives a error info not panic */ -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 2) \ diff --git a/include/configs/imx8mm_phg.h b/include/configs/imx8mm_phg.h index d2d7ffa0f5..038d3a7ce3 100644 --- a/include/configs/imx8mm_phg.h +++ b/include/configs/imx8mm_phg.h @@ -14,7 +14,7 @@ #define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CFG_MALLOC_F_ADDR 0x930000 #endif diff --git a/include/configs/imx8mm_venice.h b/include/configs/imx8mm_venice.h index 66816618b0..ed09dd09bc 100644 --- a/include/configs/imx8mm_venice.h +++ b/include/configs/imx8mm_venice.h @@ -12,7 +12,7 @@ #define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CFG_MALLOC_F_ADDR 0x930000 #endif diff --git a/include/configs/imx8mp_rsb3720.h b/include/configs/imx8mp_rsb3720.h index b82e35f496..8b96f7fd1e 100644 --- a/include/configs/imx8mp_rsb3720.h +++ b/include/configs/imx8mp_rsb3720.h @@ -23,7 +23,7 @@ EFI_GUID(0xb5fb6f08, 0xe142, 0x4db1, 0x97, 0xea, \ 0x5f, 0xd3, 0x6b, 0x9b, 0xe5, 0xb9) -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define CFG_MALLOC_F_ADDR 0x184000 /* malloc f used before \ * GD_FLG_FULL_MALLOC_INIT \ * set \ diff --git a/include/configs/imx8mq_cm.h b/include/configs/imx8mq_cm.h index 2bbd6b1680..ccbb0f8555 100644 --- a/include/configs/imx8mq_cm.h +++ b/include/configs/imx8mq_cm.h @@ -10,7 +10,7 @@ #include #include -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CFG_MALLOC_F_ADDR 0x182000 diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h index 9eefc31dc6..666f46ac10 100644 --- a/include/configs/imx8mq_evk.h +++ b/include/configs/imx8mq_evk.h @@ -10,7 +10,7 @@ #include #include -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ diff --git a/include/configs/imx8mq_phanbell.h b/include/configs/imx8mq_phanbell.h index cd73a72d2b..3bc4b0034e 100644 --- a/include/configs/imx8mq_phanbell.h +++ b/include/configs/imx8mq_phanbell.h @@ -9,7 +9,7 @@ #include #include -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ diff --git a/include/configs/imx8mq_reform2.h b/include/configs/imx8mq_reform2.h index 7fa441a8a8..40f96a5f21 100644 --- a/include/configs/imx8mq_reform2.h +++ b/include/configs/imx8mq_reform2.h @@ -10,7 +10,7 @@ #include #include -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ diff --git a/include/configs/imx8qm_mek.h b/include/configs/imx8qm_mek.h index 4d5abe2d07..842184bcae 100644 --- a/include/configs/imx8qm_mek.h +++ b/include/configs/imx8qm_mek.h @@ -10,7 +10,7 @@ #include #include -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define CFG_MALLOC_F_ADDR 0x00120000 #endif diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h index 9399950994..1b6eb2b81c 100644 --- a/include/configs/imx8qxp_mek.h +++ b/include/configs/imx8qxp_mek.h @@ -10,7 +10,7 @@ #include #include -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define CFG_MALLOC_F_ADDR 0x00120000 #endif diff --git a/include/configs/imx8ulp_evk.h b/include/configs/imx8ulp_evk.h index aa9da19a11..9308f5234f 100644 --- a/include/configs/imx8ulp_evk.h +++ b/include/configs/imx8ulp_evk.h @@ -11,7 +11,7 @@ #define CFG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define CFG_MALLOC_F_ADDR 0x22040000 #endif diff --git a/include/configs/imx93_evk.h b/include/configs/imx93_evk.h index ce6567e2af..53fb8c9b1b 100644 --- a/include/configs/imx93_evk.h +++ b/include/configs/imx93_evk.h @@ -13,7 +13,7 @@ #define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define CFG_MALLOC_F_ADDR 0x204D0000 #endif diff --git a/include/configs/kontron-sl-mx8mm.h b/include/configs/kontron-sl-mx8mm.h index 3a129c5cce..72a28a6a41 100644 --- a/include/configs/kontron-sl-mx8mm.h +++ b/include/configs/kontron-sl-mx8mm.h @@ -10,7 +10,7 @@ #include #include -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #include #endif @@ -39,7 +39,7 @@ #undef BOOTENV_RUN_NET_USB_START #define BOOTENV_RUN_NET_USB_START -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CFG_MALLOC_F_ADDR 0x930000 #endif diff --git a/include/configs/kontron_pitx_imx8m.h b/include/configs/kontron_pitx_imx8m.h index 3dda7b6680..3f52d00d6c 100644 --- a/include/configs/kontron_pitx_imx8m.h +++ b/include/configs/kontron_pitx_imx8m.h @@ -12,7 +12,7 @@ EFI_GUID(0xc898e959, 0x5b1f, 0x4e6d, 0x88, 0xe0, \ 0x40, 0xd4, 0x5c, 0xca, 0x13, 0x99) -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CFG_MALLOC_F_ADDR 0x182000 diff --git a/include/configs/librem5.h b/include/configs/librem5.h index 876b02f4da..571c7724ea 100644 --- a/include/configs/librem5.h +++ b/include/configs/librem5.h @@ -41,7 +41,7 @@ #define CONSOLE "ttymxc0" #endif -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ func(USB, usb, 0) \ diff --git a/include/configs/linkit-smart-7688.h b/include/configs/linkit-smart-7688.h index e8f7a59c40..ec1aa14be0 100644 --- a/include/configs/linkit-smart-7688.h +++ b/include/configs/linkit-smart-7688.h @@ -15,7 +15,7 @@ #define CFG_SYS_UBOOT_BASE 0 /* Serial SPL */ -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_SERIAL) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_SERIAL) #define CFG_SYS_NS16550_CLK 40000000 #define CFG_SYS_NS16550_COM3 0xb0000e00 diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index e500a7d80f..a02c752bbc 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -8,7 +8,7 @@ #define __LS1043A_COMMON_H /* SPL build */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define SPL_NO_FMAN #define SPL_NO_DSPI #define SPL_NO_PCIE @@ -19,10 +19,10 @@ #define SPL_NO_QE #define SPL_NO_EEPROM #endif -#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_NAND_BOOT)) +#if (defined(CONFIG_XPL_BUILD) && defined(CONFIG_NAND_BOOT)) #define SPL_NO_MMC #endif -#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SD_BOOT_QSPI)) +#if (defined(CONFIG_XPL_BUILD) && defined(CONFIG_SD_BOOT_QSPI)) #define SPL_NO_IFC #endif diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h index 867b098a07..53ef5975a2 100644 --- a/include/configs/ls1046a_common.h +++ b/include/configs/ls1046a_common.h @@ -8,7 +8,7 @@ #define __LS1046A_COMMON_H /* SPL build */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define SPL_NO_QBMAN #define SPL_NO_FMAN #define SPL_NO_ENV @@ -17,11 +17,11 @@ #define SPL_NO_USB #define SPL_NO_SATA #endif -#if defined(CONFIG_SPL_BUILD) && \ +#if defined(CONFIG_XPL_BUILD) && \ (defined(CONFIG_NAND_BOOT) || defined(CONFIG_QSPI_BOOT)) #define SPL_NO_MMC #endif -#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) #define SPL_NO_IFC #endif diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index 34085eeecc..cdf281947d 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -7,7 +7,7 @@ #define __LS1088_COMMON_H /* SPL build */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define SPL_NO_BOARDINFO #define SPL_NO_QIXIS #define SPL_NO_PCI diff --git a/include/configs/msc_sm2s_imx8mp.h b/include/configs/msc_sm2s_imx8mp.h index ea5c93ecf6..985b1ca91e 100644 --- a/include/configs/msc_sm2s_imx8mp.h +++ b/include/configs/msc_sm2s_imx8mp.h @@ -20,7 +20,7 @@ #define CFG_FEC_MXC_PHYADDR 1 #endif -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 1) \ func(MMC, mmc, 2) diff --git a/include/configs/mt7621.h b/include/configs/mt7621.h index e6dba70719..636d62dd88 100644 --- a/include/configs/mt7621.h +++ b/include/configs/mt7621.h @@ -15,7 +15,7 @@ #define CFG_SYS_INIT_SP_OFFSET 0x800000 /* Serial SPL */ -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_SERIAL) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_SERIAL) #define CFG_SYS_NS16550_CLK 50000000 #define CFG_SYS_NS16550_COM1 0xbe000c00 #endif diff --git a/include/configs/mt7628.h b/include/configs/mt7628.h index 1df06811d6..ba876ac302 100644 --- a/include/configs/mt7628.h +++ b/include/configs/mt7628.h @@ -13,7 +13,7 @@ #define CFG_SYS_INIT_SP_OFFSET 0x80000 /* Serial SPL */ -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_SERIAL) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_SERIAL) #define CFG_SYS_NS16550_CLK 40000000 #define CFG_SYS_NS16550_COM1 0xb0000c00 #endif diff --git a/include/configs/n2350.h b/include/configs/n2350.h index f98b9f8582..c789df55bf 100644 --- a/include/configs/n2350.h +++ b/include/configs/n2350.h @@ -18,7 +18,7 @@ */ #include "mv-common.h" -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #define KERNEL_ADDR_R __stringify(0x1000000) #define FDT_ADDR_R __stringify(0x2000000) @@ -39,6 +39,6 @@ "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \ "console=ttyS0,115200\0" -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ #endif /* _CONFIG_N2350_H */ diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index f5bd091344..23d8917b71 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -98,7 +98,7 @@ #define CFG_SYS_NAND_U_BOOT_SIZE (832 << 10) #define CFG_SYS_NAND_U_BOOT_DST (0x11000000) #define CFG_SYS_NAND_U_BOOT_START (0x11000000) -#elif defined(CONFIG_SPL_BUILD) +#elif defined(CONFIG_XPL_BUILD) #define CFG_SYS_NAND_U_BOOT_SIZE (128 << 10) #define CFG_SYS_NAND_U_BOOT_DST 0xf8f80000 #define CFG_SYS_NAND_U_BOOT_START 0xf8f80000 @@ -280,7 +280,7 @@ /* * Config the L2 Cache as L2 SRAM */ -#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) #define CFG_SYS_INIT_L2_ADDR 0xf8f80000 #define CFG_SYS_INIT_L2_ADDR_PHYS CFG_SYS_INIT_L2_ADDR diff --git a/include/configs/phycore_imx8mm.h b/include/configs/phycore_imx8mm.h index 0910ae2d87..e74a3f184c 100644 --- a/include/configs/phycore_imx8mm.h +++ b/include/configs/phycore_imx8mm.h @@ -14,7 +14,7 @@ #define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CFG_MALLOC_F_ADDR 0x930000 /* For RAW image gives a error info not panic */ diff --git a/include/configs/pico-imx8mq.h b/include/configs/pico-imx8mq.h index 422b89a3dd..3012f64c0a 100644 --- a/include/configs/pico-imx8mq.h +++ b/include/configs/pico-imx8mq.h @@ -9,7 +9,7 @@ #include #include -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ diff --git a/include/configs/rk3399_common.h b/include/configs/rk3399_common.h index d652ae4ca3..c5bcd7dc5e 100644 --- a/include/configs/rk3399_common.h +++ b/include/configs/rk3399_common.h @@ -13,7 +13,7 @@ #define CFG_SYS_SDRAM_BASE 0 #define SDRAM_MAX_SIZE 0xf8000000 -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #ifndef ROCKCHIP_DEVICE_SETTINGS #define ROCKCHIP_DEVICE_SETTINGS @@ -38,6 +38,6 @@ ROCKCHIP_DEVICE_SETTINGS \ "boot_targets=" BOOT_TARGETS "\0" -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ #endif /* __CONFIG_RK3399_COMMON_H */ diff --git a/include/configs/rockchip-common.h b/include/configs/rockchip-common.h index 9121bba373..9b8ab3cdf2 100644 --- a/include/configs/rockchip-common.h +++ b/include/configs/rockchip-common.h @@ -11,7 +11,7 @@ #define CFG_CPUID_OFFSET 0x7 #endif -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #define BOOT_TARGETS "mmc1 mmc0 nvme scsi usb pxe dhcp spi" diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index 4838bfd4f1..2acfdc7df4 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -117,7 +117,7 @@ /* SPL NAND boot support */ /* Extra Environment */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #ifdef CONFIG_CMD_DHCP #define BOOT_TARGET_DEVICES_DHCP(func) func(DHCP, dhcp, na) diff --git a/include/configs/stm32mp15_common.h b/include/configs/stm32mp15_common.h index 29a1197b5a..af6dd4a809 100644 --- a/include/configs/stm32mp15_common.h +++ b/include/configs/stm32mp15_common.h @@ -33,7 +33,7 @@ #ifdef CONFIG_DISTRO_DEFAULTS /*****************************************************************************/ -#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) #ifdef CONFIG_CMD_MMC #define BOOT_TARGET_MMC0(func) func(MMC, mmc, 0) @@ -129,7 +129,7 @@ STM32MP_EXTRA \ STM32MP_BOARD_EXTRA_ENV -#endif /* ifndef CONFIG_SPL_BUILD */ +#endif /* ifndef CONFIG_XPL_BUILD */ #endif /* ifdef CONFIG_DISTRO_DEFAULTS*/ #endif /* __CONFIG_STM32MP15_COMMMON_H */ diff --git a/include/configs/stm32mp15_dh_dhsom.h b/include/configs/stm32mp15_dh_dhsom.h index 6fe6e7b9b8..0f466711ca 100644 --- a/include/configs/stm32mp15_dh_dhsom.h +++ b/include/configs/stm32mp15_dh_dhsom.h @@ -10,7 +10,7 @@ /* PHY needs a longer autoneg timeout */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define CFG_EXTRA_ENV_SETTINGS \ "dfu_alt_info_ram=u-boot.itb ram " \ __stringify(CONFIG_SPL_LOAD_FIT_ADDRESS) \ diff --git a/include/configs/ti_omap3_common.h b/include/configs/ti_omap3_common.h index 45f7179f03..4a7474ff3f 100644 --- a/include/configs/ti_omap3_common.h +++ b/include/configs/ti_omap3_common.h @@ -31,7 +31,7 @@ 115200} /* Select serial console configuration */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define CFG_SYS_NS16550_COM1 OMAP34XX_UART1 #define CFG_SYS_NS16550_COM2 OMAP34XX_UART2 #define CFG_SYS_NS16550_COM3 OMAP34XX_UART3 diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h index c4f116aabf..7a333090b1 100644 --- a/include/configs/ti_omap4_common.h +++ b/include/configs/ti_omap4_common.h @@ -95,7 +95,7 @@ * So moving TEXT_BASE down to non-HS limit. */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* No need for i2c in SPL mode as we will use SRI2C for PMIC access on OMAP4 */ #endif diff --git a/include/configs/turris_1x.h b/include/configs/turris_1x.h index 3d398a6c1e..c05614950c 100644 --- a/include/configs/turris_1x.h +++ b/include/configs/turris_1x.h @@ -63,7 +63,7 @@ /* * For SD card builds without SPL it is needed to set CONFIG_SYS_RAMBOOT * - * if CONFIG_SPL_BUILD + * if CONFIG_XPL_BUILD * if CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR * define CONFIG_SPL_MAX_SIZE = (CONFIG_SYS_L2_SIZE+CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR_DATA * * SZ_512) @@ -121,7 +121,7 @@ */ /* Initial SRAM is used only for SD card boot in first stage image */ -#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_SPL) || defined(CONFIG_XPL_BUILD) #define CFG_SYS_INIT_L2_ADDR 0xf8f80000 #define CFG_SYS_INIT_L2_ADDR_PHYS CFG_SYS_INIT_L2_ADDR /* diff --git a/include/configs/turris_omnia.h b/include/configs/turris_omnia.h index 302194bc90..03a12d519f 100644 --- a/include/configs/turris_omnia.h +++ b/include/configs/turris_omnia.h @@ -31,7 +31,7 @@ #include "mv-common.h" /* Include the common distro boot environment */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ @@ -86,6 +86,6 @@ "bootcmd_rescue=" TURRIS_OMNIA_BOOTCMD_RESCUE "\0" \ BOOTENV -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ #endif /* _CONFIG_TURRIS_OMNIA_H */ diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h index b018bbe29d..c54383b886 100644 --- a/include/configs/verdin-imx8mm.h +++ b/include/configs/verdin-imx8mm.h @@ -12,7 +12,7 @@ #define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CFG_MALLOC_F_ADDR 0x930000 /* For RAW image gives a error info not panic */ diff --git a/include/configs/verdin-imx8mp.h b/include/configs/verdin-imx8mp.h index 0b88e95603..bff417fdaf 100644 --- a/include/configs/verdin-imx8mp.h +++ b/include/configs/verdin-imx8mp.h @@ -12,13 +12,13 @@ #define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CFG_MALLOC_F_ADDR 0x184000 /* For RAW image gives a error info not panic */ -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ #define MEM_LAYOUT_ENV_SETTINGS \ "fdt_addr_r=0x50200000\0" \ diff --git a/include/configs/vining_2000.h b/include/configs/vining_2000.h index 2cf7bc70d8..752b23d055 100644 --- a/include/configs/vining_2000.h +++ b/include/configs/vining_2000.h @@ -47,7 +47,7 @@ /* 0=user, 1=boot0, 2=boot1, * 4..7=general0..3. */ #endif -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define CFG_MXC_UART_BASE UART1_BASE #endif diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index de0db7bb63..bb0db7c5ca 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -183,7 +183,7 @@ #endif /* SPL can't handle all huge variables - define just DFU */ -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_DFU) #undef CFG_EXTRA_ENV_SETTINGS # define CFG_EXTRA_ENV_SETTINGS \ "dfu_alt_info_ram=uboot.bin ram 0x8000000 0x1000000;" \ diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 03af859c95..37c77aa161 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -44,7 +44,7 @@ /* Boot configuration */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define BOOTENV #else @@ -167,7 +167,7 @@ BOOT_TARGET_DEVICES_DHCP(func) #include -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ /* Default environment */ #ifndef CFG_EXTRA_ENV_SETTINGS diff --git a/include/env.h b/include/env.h index d2a5954ded..01c3eeae7e 100644 --- a/include/env.h +++ b/include/env.h @@ -44,7 +44,7 @@ struct env_clbk_tbl { * For SPL these are silently dropped to reduce code size, since environment * callbacks are not supported with SPL. */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define U_BOOT_ENV_CALLBACK(name, callback) \ static inline __maybe_unused void _u_boot_env_noop_##name(void) \ { \ diff --git a/include/env_callback.h b/include/env_callback.h index 8e500aaaf8..5121ae07fd 100644 --- a/include/env_callback.h +++ b/include/env_callback.h @@ -85,7 +85,7 @@ "serial#:serialno," \ CFG_ENV_CALLBACK_LIST_STATIC -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD void env_callback_init(struct env_entry *var_entry); #else static inline void env_callback_init(struct env_entry *var_entry) diff --git a/include/fdtdec.h b/include/fdtdec.h index e80de24076..555c952037 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -143,7 +143,7 @@ extern u8 __dtb_dt_spl_begin[]; /* embedded device tree blob for SPL/TPL */ static inline u8 *dtb_dt_embedded(void) { #ifdef CONFIG_OF_EMBED -# ifdef CONFIG_SPL_BUILD +# ifdef CONFIG_XPL_BUILD return __dtb_dt_spl_begin; # else return __dtb_dt_begin; diff --git a/include/image-android-dt.h b/include/image-android-dt.h index 9a3aa8fa30..d255744e8c 100644 --- a/include/image-android-dt.h +++ b/include/image-android-dt.h @@ -13,7 +13,7 @@ bool android_dt_check_header(ulong hdr_addr); bool android_dt_get_fdt_by_index(ulong hdr_addr, u32 index, ulong *addr, u32 *size); -#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) void android_dt_print_contents(ulong hdr_addr); #endif diff --git a/include/iotrace.h b/include/iotrace.h index d5610426cc..5527c984fd 100644 --- a/include/iotrace.h +++ b/include/iotrace.h @@ -42,7 +42,7 @@ struct iotrace_record { */ #if defined(CONFIG_IO_TRACE) && !defined(IOTRACE_IMPL) && \ - !defined(CONFIG_SPL_BUILD) + !defined(CONFIG_XPL_BUILD) #undef readl #define readl(addr) iotrace_readl((const void *)(addr)) diff --git a/include/linux/kconfig.h b/include/linux/kconfig.h index 2bc704e110..a59f2a61e6 100644 --- a/include/linux/kconfig.h +++ b/include/linux/kconfig.h @@ -40,7 +40,7 @@ #define _CONFIG_PREFIX TPL_ #elif defined(CONFIG_VPL_BUILD) #define _CONFIG_PREFIX VPL_ -#elif defined(CONFIG_SPL_BUILD) +#elif defined(CONFIG_XPL_BUILD) #define _CONFIG_PREFIX SPL_ #else #define _CONFIG_PREFIX @@ -53,8 +53,8 @@ /* * CONFIG_VAL(FOO) evaluates to the value of * CONFIG_TOOLS_FOO if USE_HOSTCC is defined, - * CONFIG_FOO if CONFIG_SPL_BUILD is undefined, - * CONFIG_SPL_FOO if CONFIG_SPL_BUILD is defined. + * CONFIG_FOO if CONFIG_XPL_BUILD is undefined, + * CONFIG_SPL_FOO if CONFIG_XPL_BUILD is defined. * CONFIG_TPL_FOO if CONFIG_TPL_BUILD is defined. * CONFIG_VPL_FOO if CONFIG_VPL_BUILD is defined. */ @@ -106,22 +106,22 @@ long invalid_use_of_IF_ENABLED_INT(void); /* * CONFIG_IS_ENABLED(FOO) expands to * 1 if USE_HOSTCC is defined and CONFIG_TOOLS_FOO is set to 'y', - * 1 if CONFIG_SPL_BUILD is undefined and CONFIG_FOO is set to 'y', - * 1 if CONFIG_SPL_BUILD is defined and CONFIG_SPL_FOO is set to 'y', + * 1 if CONFIG_XPL_BUILD is undefined and CONFIG_FOO is set to 'y', + * 1 if CONFIG_XPL_BUILD is defined and CONFIG_SPL_FOO is set to 'y', * 1 if CONFIG_TPL_BUILD is defined and CONFIG_TPL_FOO is set to 'y', * 0 otherwise. * * CONFIG_IS_ENABLED(FOO, (abc)) expands to * abc if USE_HOSTCC is defined and CONFIG_TOOLS_FOO is set to 'y', - * abc if CONFIG_SPL_BUILD is undefined and CONFIG_FOO is set to 'y', - * abc if CONFIG_SPL_BUILD is defined and CONFIG_SPL_FOO is set to 'y', + * abc if CONFIG_XPL_BUILD is undefined and CONFIG_FOO is set to 'y', + * abc if CONFIG_XPL_BUILD is defined and CONFIG_SPL_FOO is set to 'y', * abc if CONFIG_TPL_BUILD is defined and CONFIG_TPL_FOO is set to 'y', * nothing otherwise. * * CONFIG_IS_ENABLED(FOO, (abc), (def)) expands to * abc if USE_HOSTCC is defined and CONFIG_TOOLS_FOO is set to 'y', - * abc if CONFIG_SPL_BUILD is undefined and CONFIG_FOO is set to 'y', - * abc if CONFIG_SPL_BUILD is defined and CONFIG_SPL_FOO is set to 'y', + * abc if CONFIG_XPL_BUILD is undefined and CONFIG_FOO is set to 'y', + * abc if CONFIG_XPL_BUILD is defined and CONFIG_SPL_FOO is set to 'y', * abc if CONFIG_TPL_BUILD is defined and CONFIG_TPL_FOO is set to 'y', * def otherwise. * diff --git a/include/mmc.h b/include/mmc.h index f508cd1570..61d1f4bf12 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -725,7 +725,7 @@ struct mmc { u64 capacity_boot; u64 capacity_rpmb; u64 capacity_gp[4]; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD u64 enh_user_start; u64 enh_user_size; #endif diff --git a/include/mtd/cfi_flash.h b/include/mtd/cfi_flash.h index f4aecaac75..be292e3ceb 100644 --- a/include/mtd/cfi_flash.h +++ b/include/mtd/cfi_flash.h @@ -163,7 +163,7 @@ struct cfi_pri_hdr { #if defined(CONFIG_SYS_MAX_FLASH_BANKS_DETECT) /* map to cfi_flash_num_flash_banks only when supported */ #if IS_ENABLED(CONFIG_FLASH_CFI_DRIVER) && \ - (!IS_ENABLED(CONFIG_SPL_BUILD) || IS_ENABLED(CONFIG_SPL_MTD)) + (!IS_ENABLED(CONFIG_XPL_BUILD) || IS_ENABLED(CONFIG_SPL_MTD)) #define CFI_FLASH_BANKS (cfi_flash_num_flash_banks) /* board code can update this variable before CFI detection */ extern int cfi_flash_num_flash_banks; diff --git a/include/net.h b/include/net.h index bb2ae20f52..dc8b5e9cc3 100644 --- a/include/net.h +++ b/include/net.h @@ -683,7 +683,7 @@ int net_send_udp_packet(uchar *ether, struct in_addr dest, int dport, /* Processes a received packet */ void net_process_received_packet(uchar *in_packet, int len); -#if defined(CONFIG_NETCONSOLE) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_NETCONSOLE) && !defined(CONFIG_XPL_BUILD) void nc_start(void); int nc_input_packet(uchar *pkt, struct in_addr src_ip, unsigned dest_port, unsigned src_port, unsigned len); @@ -691,7 +691,7 @@ int nc_input_packet(uchar *pkt, struct in_addr src_ip, unsigned dest_port, static __always_inline int eth_is_on_demand_init(void) { -#if defined(CONFIG_NETCONSOLE) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_NETCONSOLE) && !defined(CONFIG_XPL_BUILD) extern enum proto_t net_loop_last_protocol; return net_loop_last_protocol != NETCONS; @@ -702,7 +702,7 @@ static __always_inline int eth_is_on_demand_init(void) static inline void eth_set_last_protocol(int protocol) { -#if defined(CONFIG_NETCONSOLE) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_NETCONSOLE) && !defined(CONFIG_XPL_BUILD) extern enum proto_t net_loop_last_protocol; net_loop_last_protocol = protocol; diff --git a/include/part.h b/include/part.h index 797b542ef1..9266267755 100644 --- a/include/part.h +++ b/include/part.h @@ -439,7 +439,7 @@ ulong disk_blk_erase(struct udevice *dev, lbaint_t start, lbaint_t blkcnt); * We don't support printing partition information in SPL and only support * getting partition information in a few cases. */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD # define part_print_ptr(x) NULL # if defined(CONFIG_SPL_FS_EXT4) || defined(CONFIG_SPL_FS_FAT) || \ defined(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION) diff --git a/include/sdp.h b/include/sdp.h index 5492f9c47d..0a97f28073 100644 --- a/include/sdp.h +++ b/include/sdp.h @@ -11,7 +11,7 @@ int sdp_init(struct udevice *udc); -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #include int spl_sdp_handle(struct udevice *udc, struct spl_image_info *spl_image, diff --git a/include/search.h b/include/search.h index 7faf23f4ac..3952198a0d 100644 --- a/include/search.h +++ b/include/search.h @@ -29,7 +29,7 @@ enum env_action { struct env_entry { const char *key; char *data; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD int (*callback)(const char *name, const char *value, enum env_op op, int flags); #endif diff --git a/include/spl.h b/include/spl.h index b2978d8bba..3fc50cd919 100644 --- a/include/spl.h +++ b/include/spl.h @@ -53,7 +53,7 @@ static inline bool xpl_is_first_phase(void) if (IS_ENABLED(CONFIG_TPL_BUILD)) return true; } else if (IS_ENABLED(CONFIG_SPL)) { - if (IS_ENABLED(CONFIG_SPL_BUILD)) + if (IS_ENABLED(CONFIG_XPL_BUILD)) return true; } else { return true; @@ -92,7 +92,7 @@ enum xpl_phase_t { * * To include code only in SPL, you might do: * - * #if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD) + * #if defined(CONFIG_XPL_BUILD) && !defined(CONFIG_TPL_BUILD) * ... * #endif * @@ -104,7 +104,7 @@ enum xpl_phase_t { * * To include code only in U-Boot proper, you might do: * - * #ifndef CONFIG_SPL_BUILD + * #ifndef CONFIG_XPL_BUILD * ... * #endif * @@ -122,7 +122,7 @@ static inline enum xpl_phase_t xpl_phase(void) return PHASE_TPL; #elif defined(CONFIG_VPL_BUILD) return PHASE_VPL; -#elif defined(CONFIG_SPL_BUILD) +#elif defined(CONFIG_XPL_BUILD) return PHASE_SPL; #else DECLARE_GLOBAL_DATA_PTR; @@ -137,7 +137,7 @@ static inline enum xpl_phase_t xpl_phase(void) /* returns true if in U-Boot proper, false if in xPL */ static inline bool not_xpl(void) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD return false; #endif @@ -166,7 +166,7 @@ static inline enum xpl_phase_t xpl_prev_phase(void) return PHASE_NONE; #elif defined(CONFIG_VPL_BUILD) return PHASE_TPL; /* VPL requires TPL */ -#elif defined(CONFIG_SPL_BUILD) +#elif defined(CONFIG_XPL_BUILD) return IS_ENABLED(CONFIG_VPL) ? PHASE_VPL : IS_ENABLED(CONFIG_TPL) ? PHASE_TPL : PHASE_NONE; @@ -239,7 +239,7 @@ static inline const char *xpl_prefix(enum xpl_phase_t phase) } /* A string name for SPL or TPL */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD # ifdef CONFIG_TPL_BUILD # define SPL_TPL_NAME "TPL" # elif defined(CONFIG_VPL_BUILD) diff --git a/include/stdio.h b/include/stdio.h index e732579553..d42fdd2728 100644 --- a/include/stdio.h +++ b/include/stdio.h @@ -9,7 +9,7 @@ int getchar(void); int tstc(void); /* stdout */ -#if !defined(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(SERIAL) +#if !defined(CONFIG_XPL_BUILD) || CONFIG_IS_ENABLED(SERIAL) void putc(const char c); void puts(const char *s); #ifdef CONFIG_CONSOLE_FLUSH_SUPPORT diff --git a/include/sunxi_gpio.h b/include/sunxi_gpio.h index db3742c039..122987c395 100644 --- a/include/sunxi_gpio.h +++ b/include/sunxi_gpio.h @@ -206,7 +206,7 @@ void sunxi_gpio_set_pull(u32 pin, u32 val); void sunxi_gpio_set_pull_bank(void *bank_base, int pin_offset, u32 val); int sunxi_name_to_gpio(const char *name); -#if !defined CONFIG_SPL_BUILD && defined CONFIG_AXP_GPIO +#if !defined CONFIG_XPL_BUILD && defined CONFIG_AXP_GPIO int axp_gpio_init(void); #else static inline int axp_gpio_init(void) { return 0; } diff --git a/include/upl.h b/include/upl.h index 2ec5ef1b5c..4d0eca8804 100644 --- a/include/upl.h +++ b/include/upl.h @@ -320,7 +320,7 @@ int upl_read_handoff(struct upl *upl, oftree tree); int upl_get_test_data(struct unit_test_state *uts, struct upl *upl); #endif /* USE_HOSTCC */ -#if CONFIG_IS_ENABLED(UPL) && defined(CONFIG_SPL_BUILD) +#if CONFIG_IS_ENABLED(UPL) && defined(CONFIG_XPL_BUILD) /** * upl_set_fit_info() - Set up basic info about the FIT @@ -367,7 +367,7 @@ int _upl_add_image(int node, ulong load_addr, ulong size, const char *desc); static inline int upl_add_image(const void *fit, int node, ulong load_addr, ulong size) { - if (CONFIG_IS_ENABLED(UPL) && IS_ENABLED(CONFIG_SPL_BUILD)) { + if (CONFIG_IS_ENABLED(UPL) && IS_ENABLED(CONFIG_XPL_BUILD)) { const char *desc = fdt_getprop(fit, node, FIT_DESC_PROP, NULL); return _upl_add_image(node, load_addr, size, desc); diff --git a/include/vbe.h b/include/vbe.h index 5ede8181b9..56bff63362 100644 --- a/include/vbe.h +++ b/include/vbe.h @@ -41,7 +41,7 @@ struct vbe_handoff { */ static inline enum vbe_phase_t vbe_phase(void) { - if (IS_ENABLED(CONFIG_SPL_BUILD)) + if (IS_ENABLED(CONFIG_XPL_BUILD)) return VBE_PHASE_FIRMWARE; return VBE_PHASE_OS; -- 2.39.5