From ed9e9b2213b6fe09005349057afa33a044bdd4d3 Mon Sep 17 00:00:00 2001 From: Sean Anderson Date: Tue, 23 Nov 2021 15:03:42 -0500 Subject: [PATCH] mmc: fsl_esdhc_imx: simplify 64bit check for SDMA transfers [ fsl_esdhc commit da86e8cfcb03ed5c1d8e0718bc8bc8583e60ced8 ] SDMA can only do DMA with 32 bit addresses. This is true for all architectures (just doesn't apply to 32 bit ones). Simplify the code and remove unnecessary CONFIG_FSL_LAYERSCAPE. Also make the error message more concise. Signed-off-by: Michael Walle Signed-off-by: Sean Anderson Reviewed-by: Jaehoon Chung --- drivers/mmc/fsl_esdhc_imx.c | 33 ++++++--------------------------- 1 file changed, 6 insertions(+), 27 deletions(-) diff --git a/drivers/mmc/fsl_esdhc_imx.c b/drivers/mmc/fsl_esdhc_imx.c index 72f3eec205..84df131c9f 100644 --- a/drivers/mmc/fsl_esdhc_imx.c +++ b/drivers/mmc/fsl_esdhc_imx.c @@ -282,10 +282,7 @@ static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc *mmc, { int timeout; struct fsl_esdhc *regs = priv->esdhc_regs; -#if defined(CONFIG_S32V234) || defined(CONFIG_IMX8) || defined(CONFIG_IMX8M) || \ - defined(CONFIG_IMX8ULP) dma_addr_t addr; -#endif uint wml_value; wml_value = data->blocksize/4; @@ -296,16 +293,10 @@ static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc *mmc, esdhc_clrsetbits32(®s->wml, WML_RD_WML_MASK, wml_value); #ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO -#if defined(CONFIG_S32V234) || defined(CONFIG_IMX8) || defined(CONFIG_IMX8M) || \ - defined(CONFIG_IMX8ULP) addr = virt_to_phys((void *)(data->dest)); if (upper_32_bits(addr)) - printf("Error found for upper 32 bits\n"); - else - esdhc_write32(®s->dsaddr, lower_32_bits(addr)); -#else - esdhc_write32(®s->dsaddr, (u32)data->dest); -#endif + printf("Cannot use 64 bit addresses with SDMA\n"); + esdhc_write32(®s->dsaddr, lower_32_bits(addr)); #endif } else { #ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO @@ -334,16 +325,10 @@ static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc *mmc, esdhc_clrsetbits32(®s->wml, WML_WR_WML_MASK, wml_value << 16); #ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO -#if defined(CONFIG_S32V234) || defined(CONFIG_IMX8) || defined(CONFIG_IMX8M) || \ - defined(CONFIG_IMX8ULP) addr = virt_to_phys((void *)(data->src)); if (upper_32_bits(addr)) - printf("Error found for upper 32 bits\n"); - else - esdhc_write32(®s->dsaddr, lower_32_bits(addr)); -#else - esdhc_write32(®s->dsaddr, (u32)data->src); -#endif + printf("Cannot use 64 bit addresses with SDMA\n"); + esdhc_write32(®s->dsaddr, lower_32_bits(addr)); #endif } @@ -400,18 +385,12 @@ static void check_and_invalidate_dcache_range unsigned end = 0; unsigned size = roundup(ARCH_DMA_MINALIGN, data->blocks*data->blocksize); -#if defined(CONFIG_S32V234) || defined(CONFIG_IMX8) || defined(CONFIG_IMX8M) || \ - defined(CONFIG_IMX8ULP) dma_addr_t addr; addr = virt_to_phys((void *)(data->dest)); if (upper_32_bits(addr)) - printf("Error found for upper 32 bits\n"); - else - start = lower_32_bits(addr); -#else - start = (unsigned)data->dest; -#endif + printf("Cannot use 64 bit addresses with SDMA\n"); + start = lower_32_bits(addr); end = start + size; invalidate_dcache_range(start, end); } -- 2.39.5