From dd8c3136aa8abb61281cc32f1ce19e1f84a66922 Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Wed, 13 Jul 2022 10:59:45 +0900 Subject: [PATCH] ARM: dts: uniphier: Change phy-mode to RGMII-ID to enable delay pins UniPhier LD20, PXs2 and PXs3 boards have ethernet phy that has RX/TX delays of RGMII interface using pull-ups on the RXDLY and TXDLY pins. So should set the phy-mode to "rgmii-id" to show that RX/TX delays are enabled. Signed-off-by: Kunihiko Hayashi Reviewed-by: Ramon Fried --- arch/arm/dts/uniphier-ld20.dtsi | 2 +- arch/arm/dts/uniphier-pxs2.dtsi | 2 +- arch/arm/dts/uniphier-pxs3.dtsi | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/dts/uniphier-ld20.dtsi b/arch/arm/dts/uniphier-ld20.dtsi index 5e7143ed01..4549935c42 100644 --- a/arch/arm/dts/uniphier-ld20.dtsi +++ b/arch/arm/dts/uniphier-ld20.dtsi @@ -734,7 +734,7 @@ clocks = <&sys_clk 6>; reset-names = "ether"; resets = <&sys_rst 6>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; local-mac-address = [00 00 00 00 00 00]; socionext,syscon-phy-mode = <&soc_glue 0>; diff --git a/arch/arm/dts/uniphier-pxs2.dtsi b/arch/arm/dts/uniphier-pxs2.dtsi index 899ff379c9..7a8b6c10f4 100644 --- a/arch/arm/dts/uniphier-pxs2.dtsi +++ b/arch/arm/dts/uniphier-pxs2.dtsi @@ -583,7 +583,7 @@ clocks = <&sys_clk 6>; reset-names = "ether"; resets = <&sys_rst 6>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; local-mac-address = [00 00 00 00 00 00]; socionext,syscon-phy-mode = <&soc_glue 0>; diff --git a/arch/arm/dts/uniphier-pxs3.dtsi b/arch/arm/dts/uniphier-pxs3.dtsi index c4344926d9..004656c992 100644 --- a/arch/arm/dts/uniphier-pxs3.dtsi +++ b/arch/arm/dts/uniphier-pxs3.dtsi @@ -564,7 +564,7 @@ clocks = <&sys_clk 6>; reset-names = "ether"; resets = <&sys_rst 6>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; local-mac-address = [00 00 00 00 00 00]; socionext,syscon-phy-mode = <&soc_glue 0>; @@ -585,7 +585,7 @@ clocks = <&sys_clk 7>; reset-names = "ether"; resets = <&sys_rst 7>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; local-mac-address = [00 00 00 00 00 00]; socionext,syscon-phy-mode = <&soc_glue 1>; -- 2.39.5