From dd5f2351e99aad8fcbedbc1305b8b51b09952336 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Thu, 5 Mar 2020 12:12:38 +0100 Subject: [PATCH] arm64: dts: meson: sync dt and bindings from v5.6-rc2 Sync the device tree and dt-bindings from Linux v5.6-rc2 11a48a5a18c6 ("Linux 5.6-rc2") The only exception to this is the mmc pinctrl pin bias of gxl SoC family. This is a fix which found its way to u-boot but not Linux yet. Acked-by: Neil Armstrong Signed-off-by: Jerome Brunet Signed-off-by: Neil Armstrong --- arch/arm/dts/meson-axg-s400.dts | 70 ++- arch/arm/dts/meson-axg.dtsi | 273 ++++++++-- arch/arm/dts/meson-g12-common.dtsi | 478 ++++++------------ arch/arm/dts/meson-g12.dtsi | 398 +++++++++++++++ arch/arm/dts/meson-g12a-sei510.dts | 64 +++ arch/arm/dts/meson-g12a-u200.dts | 54 ++ arch/arm/dts/meson-g12a.dtsi | 33 +- arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts | 25 + arch/arm/dts/meson-g12b-odroid-n2.dts | 2 +- arch/arm/dts/meson-g12b.dtsi | 26 +- arch/arm/dts/meson-gx.dtsi | 87 +++- arch/arm/dts/meson-gxbb-nanopi-k2.dts | 26 +- arch/arm/dts/meson-gxbb-odroidc2.dts | 100 +++- arch/arm/dts/meson-gxbb-p200.dts | 9 +- arch/arm/dts/meson-gxbb-p201.dts | 2 +- arch/arm/dts/meson-gxbb-p20x.dtsi | 9 +- arch/arm/dts/meson-gxbb.dtsi | 118 ++++- arch/arm/dts/meson-gxl-s805x-libretech-ac.dts | 2 +- arch/arm/dts/meson-gxl-s905x-khadas-vim.dts | 20 +- arch/arm/dts/meson-gxl-s905x-libretech-cc.dts | 26 +- arch/arm/dts/meson-gxl-s905x-p212.dtsi | 10 +- arch/arm/dts/meson-gxl.dtsi | 76 ++- arch/arm/dts/meson-gxm-khadas-vim2.dts | 71 +-- arch/arm/dts/meson-gxm.dtsi | 39 +- arch/arm/dts/meson-khadas-vim3.dtsi | 7 + arch/arm/dts/meson-sm1-sei610.dts | 236 ++++++++- arch/arm/dts/meson-sm1.dtsi | 356 +++++++++++++ include/dt-bindings/clock/axg-audio-clkc.h | 10 + include/dt-bindings/clock/gxbb-aoclkc.h | 7 + include/dt-bindings/clock/gxbb-clkc.h | 21 + include/dt-bindings/gpio/meson-gxbb-gpio.h | 8 +- include/dt-bindings/gpio/meson-gxl-gpio.h | 8 +- .../reset/amlogic,meson-axg-audio-arb.h | 2 + .../reset/amlogic,meson-axg-reset.h | 3 +- .../reset/amlogic,meson-g12a-audio-reset.h | 15 + .../reset/amlogic,meson-gxbb-reset.h | 51 +- 36 files changed, 2119 insertions(+), 623 deletions(-) create mode 100644 arch/arm/dts/meson-g12.dtsi diff --git a/arch/arm/dts/meson-axg-s400.dts b/arch/arm/dts/meson-axg-s400.dts index 18778ada7b..4cd2d59518 100644 --- a/arch/arm/dts/meson-axg-s400.dts +++ b/arch/arm/dts/meson-axg-s400.dts @@ -60,7 +60,7 @@ serial1 = &uart_A; }; - linein: audio-codec@0 { + linein: audio-codec-0 { #sound-dai-cells = <0>; compatible = "everest,es7241"; VDDA-supply = <&vcc_3v3>; @@ -70,7 +70,7 @@ sound-name-prefix = "Linein"; }; - lineout: audio-codec@1 { + lineout: audio-codec-1 { #sound-dai-cells = <0>; compatible = "everest,es7154"; VDD-supply = <&vcc_3v3>; @@ -79,14 +79,14 @@ sound-name-prefix = "Lineout"; }; - spdif_dit: audio-codec@2 { + spdif_dit: audio-codec-2 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; status = "okay"; sound-name-prefix = "DIT"; }; - dmics: audio-codec@3 { + dmics: audio-codec-3 { #sound-dai-cells = <0>; compatible = "dmic-codec"; num-channels = <7>; @@ -95,6 +95,13 @@ sound-name-prefix = "MIC"; }; + spdif_dir: audio-codec-4 { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dir"; + status = "okay"; + sound-name-prefix = "DIR"; + }; + emmc_pwrseq: emmc-pwrseq { compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; @@ -249,6 +256,9 @@ "TODDR_A IN 2", "TDMIN_C OUT", "TODDR_B IN 2", "TDMIN_C OUT", "TODDR_C IN 2", "TDMIN_C OUT", + "TODDR_A IN 3", "SPDIFIN Capture", + "TODDR_B IN 3", "SPDIFIN Capture", + "TODDR_C IN 3", "SPDIFIN Capture", "TODDR_A IN 4", "PDM Capture", "TODDR_B IN 4", "PDM Capture", "TODDR_C IN 4", "PDM Capture", @@ -272,31 +282,31 @@ <393216000>; status = "okay"; - dai-link@0 { + dai-link-0 { sound-dai = <&frddr_a>; }; - dai-link@1 { + dai-link-1 { sound-dai = <&frddr_b>; }; - dai-link@2 { + dai-link-2 { sound-dai = <&frddr_c>; }; - dai-link@3 { + dai-link-3 { sound-dai = <&toddr_a>; }; - dai-link@4 { + dai-link-4 { sound-dai = <&toddr_b>; }; - dai-link@5 { + dai-link-5 { sound-dai = <&toddr_c>; }; - dai-link@6 { + dai-link-6 { sound-dai = <&tdmif_c>; dai-format = "i2s"; dai-tdm-slot-tx-mask-2 = <1 1>; @@ -317,7 +327,7 @@ }; - dai-link@7 { + dai-link-7 { sound-dai = <&spdifout>; codec { @@ -325,7 +335,15 @@ }; }; - dai-link@8 { + dai-link-8 { + sound-dai = <&spdifin>; + + codec { + sound-dai = <&spdif_dir>; + }; + }; + + dai-link-9 { sound-dai = <&pdm>; codec { @@ -357,6 +375,8 @@ eth_phy0: ethernet-phy@0 { /* Realtek RTL8211F (0x001cc916) */ reg = <0>; + interrupt-parent = <&gpio_intc>; + interrupts = <98 IRQ_TYPE_LEVEL_LOW>; eee-broken-1000t; }; }; @@ -444,7 +464,8 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + sd-uhs-sdr104; + max-frequency = <200000000>; non-removable; disable-wp; @@ -461,15 +482,14 @@ /* emmc storage */ &sd_emmc_c { - status = "disabled"; - pinctrl-0 = <&emmc_pins>; + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; pinctrl-1 = <&emmc_clk_gate_pins>; pinctrl-names = "default", "clk-gate"; bus-width = <8>; - cap-sd-highspeed; cap-mmc-highspeed; - max-frequency = <180000000>; + max-frequency = <200000000>; non-removable; disable-wp; mmc-ddr-1_8v; @@ -481,6 +501,12 @@ vqmmc-supply = <&vddio_boot>; }; +&spdifin { + pinctrl-0 = <&spdif_in_a19_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &spdifout { pinctrl-0 = <&spdif_out_a20_pins>; pinctrl-names = "default"; @@ -543,8 +569,14 @@ &uart_A { status = "okay"; - pinctrl-0 = <&uart_a_pins>; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_21 GPIO_ACTIVE_HIGH>; + }; }; &uart_AO { diff --git a/arch/arm/dts/meson-axg.dtsi b/arch/arm/dts/meson-axg.dtsi index df017dbd2e..aace3d32a3 100644 --- a/arch/arm/dts/meson-axg.dtsi +++ b/arch/arm/dts/meson-axg.dtsi @@ -20,7 +20,7 @@ #address-cells = <2>; #size-cells = <2>; - tdmif_a: audio-controller@0 { + tdmif_a: audio-controller-0 { compatible = "amlogic,axg-tdm-iface"; #sound-dai-cells = <0>; sound-name-prefix = "TDM_A"; @@ -31,7 +31,7 @@ status = "disabled"; }; - tdmif_b: audio-controller@1 { + tdmif_b: audio-controller-1 { compatible = "amlogic,axg-tdm-iface"; #sound-dai-cells = <0>; sound-name-prefix = "TDM_B"; @@ -42,7 +42,7 @@ status = "disabled"; }; - tdmif_c: audio-controller@2 { + tdmif_c: audio-controller-2 { compatible = "amlogic,axg-tdm-iface"; #sound-dai-cells = <0>; sound-name-prefix = "TDM_C"; @@ -53,13 +53,6 @@ status = "disabled"; }; - ao_alt_xtal: ao_alt_xtal-clk { - compatible = "fixed-clock"; - clock-frequency = <32000000>; - clock-output-names = "ao_alt_xtal"; - #clock-cells = <0>; - }; - arm-pmu { compatible = "arm,cortex-a53-pmu"; interrupts = , @@ -75,34 +68,38 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&l2>; + clocks = <&scpi_dvfs 0>; }; cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&l2>; + clocks = <&scpi_dvfs 0>; }; cpu2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x2>; enable-method = "psci"; next-level-cache = <&l2>; + clocks = <&scpi_dvfs 0>; }; cpu3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x3>; enable-method = "psci"; next-level-cache = <&l2>; + clocks = <&scpi_dvfs 0>; }; l2: l2-cache0 { @@ -110,6 +107,19 @@ }; }; + sm: secure-monitor { + compatible = "amlogic,meson-gxbb-sm"; + }; + + efuse: efuse { + compatible = "amlogic,meson-gxbb-efuse"; + clocks = <&clkc CLKID_EFUSE>; + #address-cells = <1>; + #size-cells = <1>; + read-only; + secure-monitor = <&sm>; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -133,6 +143,28 @@ }; }; + scpi { + compatible = "arm,scpi-pre-1.0"; + mboxes = <&mailbox 1 &mailbox 2>; + shmem = <&cpu_scp_lpri &cpu_scp_hpri>; + + scpi_clocks: clocks { + compatible = "arm,scpi-clocks"; + + scpi_dvfs: clock-controller { + compatible = "arm,scpi-dvfs-clocks"; + #clock-cells = <1>; + clock-indices = <0>; + clock-output-names = "vcpu"; + }; + }; + + scpi_sensors: sensors { + compatible = "amlogic,meson-gxbb-scpi-sensors"; + #thermal-sensor-cells = <1>; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; @@ -140,15 +172,19 @@ ranges; ethmac: ethernet@ff3f0000 { - compatible = "amlogic,meson-axg-dwmac", "snps,dwmac"; - reg = <0x0 0xff3f0000 0x0 0x10000 - 0x0 0xff634540 0x0 0x8>; - interrupts = ; + compatible = "amlogic,meson-axg-dwmac", + "snps,dwmac-3.70a", + "snps,dwmac"; + reg = <0x0 0xff3f0000 0x0 0x10000>, + <0x0 0xff634540 0x0 0x8>; + interrupts = ; interrupt-names = "macirq"; clocks = <&clkc CLKID_ETH>, <&clkc CLKID_FCLK_DIV2>, <&clkc CLKID_MPLL2>; clock-names = "stmmaceth", "clkin0", "clkin1"; + rx-fifo-depth = <4096>; + tx-fifo-depth = <2048>; status = "disabled"; }; @@ -200,6 +236,7 @@ groups = "i2c0_sck", "i2c0_sda"; function = "i2c0"; + bias-disable; }; }; @@ -208,6 +245,7 @@ groups = "i2c1_sck_x", "i2c1_sda_x"; function = "i2c1"; + bias-disable; }; }; @@ -216,6 +254,7 @@ groups = "i2c1_sck_z", "i2c1_sda_z"; function = "i2c1"; + bias-disable; }; }; @@ -224,6 +263,7 @@ groups = "i2c2_sck_a", "i2c2_sda_a"; function = "i2c2"; + bias-disable; }; }; @@ -232,6 +272,7 @@ groups = "i2c2_sck_x", "i2c2_sda_x"; function = "i2c2"; + bias-disable; }; }; @@ -240,6 +281,7 @@ groups = "i2c3_sda_a6", "i2c3_sck_a7"; function = "i2c3"; + bias-disable; }; }; @@ -248,6 +290,7 @@ groups = "i2c3_sda_a12", "i2c3_sck_a13"; function = "i2c3"; + bias-disable; }; }; @@ -256,11 +299,12 @@ groups = "i2c3_sda_a19", "i2c3_sck_a20"; function = "i2c3"; + bias-disable; }; }; emmc_pins: emmc { - mux { + mux-0 { groups = "emmc_nand_d0", "emmc_nand_d1", "emmc_nand_d2", @@ -269,10 +313,23 @@ "emmc_nand_d5", "emmc_nand_d6", "emmc_nand_d7", - "emmc_clk", - "emmc_cmd", - "emmc_ds"; + "emmc_cmd"; + function = "emmc"; + bias-pull-up; + }; + + mux-1 { + groups = "emmc_clk"; function = "emmc"; + bias-disable; + }; + }; + + emmc_ds_pins: emmc_ds { + mux { + groups = "emmc_ds"; + function = "emmc"; + bias-pull-down; }; }; @@ -280,9 +337,6 @@ mux { groups = "BOOT_8"; function = "gpio_periphs"; - }; - cfg-pull-down { - pins = "BOOT_8"; bias-pull-down; }; }; @@ -304,6 +358,7 @@ "eth_txd2_rgmii", "eth_txd3_rgmii"; function = "eth"; + bias-disable; }; }; @@ -324,6 +379,7 @@ "eth_txd2_rgmii", "eth_txd3_rgmii"; function = "eth"; + bias-disable; }; }; @@ -339,6 +395,7 @@ "eth_txd0_x", "eth_txd1_x"; function = "eth"; + bias-disable; }; }; @@ -354,6 +411,7 @@ "eth_txd0_y", "eth_txd1_y"; function = "eth"; + bias-disable; }; }; @@ -361,6 +419,7 @@ mux { groups = "mclk_b"; function = "mclk_b"; + bias-disable; }; }; @@ -368,6 +427,7 @@ mux { groups = "mclk_c"; function = "mclk_c"; + bias-disable; }; }; @@ -375,6 +435,7 @@ mux { groups = "pdm_dclk_a14"; function = "pdm"; + bias-disable; }; }; @@ -382,6 +443,7 @@ mux { groups = "pdm_dclk_a19"; function = "pdm"; + bias-disable; }; }; @@ -389,6 +451,7 @@ mux { groups = "pdm_din0"; function = "pdm"; + bias-disable; }; }; @@ -396,6 +459,7 @@ mux { groups = "pdm_din1"; function = "pdm"; + bias-disable; }; }; @@ -403,6 +467,7 @@ mux { groups = "pdm_din2"; function = "pdm"; + bias-disable; }; }; @@ -410,6 +475,7 @@ mux { groups = "pdm_din3"; function = "pdm"; + bias-disable; }; }; @@ -417,6 +483,7 @@ mux { groups = "pwm_a_a"; function = "pwm_a"; + bias-disable; }; }; @@ -424,6 +491,7 @@ mux { groups = "pwm_a_x18"; function = "pwm_a"; + bias-disable; }; }; @@ -431,6 +499,7 @@ mux { groups = "pwm_a_x20"; function = "pwm_a"; + bias-disable; }; }; @@ -438,6 +507,7 @@ mux { groups = "pwm_a_z"; function = "pwm_a"; + bias-disable; }; }; @@ -445,6 +515,7 @@ mux { groups = "pwm_b_a"; function = "pwm_b"; + bias-disable; }; }; @@ -452,6 +523,7 @@ mux { groups = "pwm_b_x"; function = "pwm_b"; + bias-disable; }; }; @@ -459,6 +531,7 @@ mux { groups = "pwm_b_z"; function = "pwm_b"; + bias-disable; }; }; @@ -466,6 +539,7 @@ mux { groups = "pwm_c_a"; function = "pwm_c"; + bias-disable; }; }; @@ -473,6 +547,7 @@ mux { groups = "pwm_c_x10"; function = "pwm_c"; + bias-disable; }; }; @@ -480,6 +555,7 @@ mux { groups = "pwm_c_x17"; function = "pwm_c"; + bias-disable; }; }; @@ -487,6 +563,7 @@ mux { groups = "pwm_d_x11"; function = "pwm_d"; + bias-disable; }; }; @@ -494,18 +571,25 @@ mux { groups = "pwm_d_x16"; function = "pwm_d"; + bias-disable; }; }; sdio_pins: sdio { - mux { + mux-0 { groups = "sdio_d0", "sdio_d1", "sdio_d2", "sdio_d3", - "sdio_cmd", - "sdio_clk"; + "sdio_cmd"; + function = "sdio"; + bias-pull-up; + }; + + mux-1 { + groups = "sdio_clk"; function = "sdio"; + bias-disable; }; }; @@ -513,9 +597,6 @@ mux { groups = "GPIOX_4"; function = "gpio_periphs"; - }; - cfg-pull-down { - pins = "GPIOX_4"; bias-pull-down; }; }; @@ -524,6 +605,7 @@ mux { groups = "spdif_in_z"; function = "spdif_in"; + bias-disable; }; }; @@ -531,6 +613,7 @@ mux { groups = "spdif_in_a1"; function = "spdif_in"; + bias-disable; }; }; @@ -538,6 +621,7 @@ mux { groups = "spdif_in_a7"; function = "spdif_in"; + bias-disable; }; }; @@ -545,6 +629,7 @@ mux { groups = "spdif_in_a19"; function = "spdif_in"; + bias-disable; }; }; @@ -552,6 +637,7 @@ mux { groups = "spdif_in_a20"; function = "spdif_in"; + bias-disable; }; }; @@ -559,6 +645,7 @@ mux { groups = "spdif_out_a1"; function = "spdif_out"; + bias-disable; }; }; @@ -566,6 +653,7 @@ mux { groups = "spdif_out_a11"; function = "spdif_out"; + bias-disable; }; }; @@ -573,6 +661,7 @@ mux { groups = "spdif_out_a19"; function = "spdif_out"; + bias-disable; }; }; @@ -580,6 +669,7 @@ mux { groups = "spdif_out_a20"; function = "spdif_out"; + bias-disable; }; }; @@ -587,6 +677,7 @@ mux { groups = "spdif_out_z"; function = "spdif_out"; + bias-disable; }; }; @@ -596,6 +687,7 @@ "spi0_mosi", "spi0_clk"; function = "spi0"; + bias-disable; }; }; @@ -603,6 +695,7 @@ mux { groups = "spi0_ss0"; function = "spi0"; + bias-disable; }; }; @@ -610,6 +703,7 @@ mux { groups = "spi0_ss1"; function = "spi0"; + bias-disable; }; }; @@ -617,6 +711,7 @@ mux { groups = "spi0_ss2"; function = "spi0"; + bias-disable; }; }; @@ -626,6 +721,7 @@ "spi1_mosi_a", "spi1_clk_a"; function = "spi1"; + bias-disable; }; }; @@ -633,6 +729,7 @@ mux { groups = "spi1_ss0_a"; function = "spi1"; + bias-disable; }; }; @@ -640,6 +737,7 @@ mux { groups = "spi1_ss1"; function = "spi1"; + bias-disable; }; }; @@ -649,6 +747,7 @@ "spi1_mosi_x", "spi1_clk_x"; function = "spi1"; + bias-disable; }; }; @@ -656,6 +755,7 @@ mux { groups = "spi1_ss0_x"; function = "spi1"; + bias-disable; }; }; @@ -663,6 +763,7 @@ mux { groups = "tdma_din0"; function = "tdma"; + bias-disable; }; }; @@ -670,6 +771,7 @@ mux { groups = "tdma_dout0_x14"; function = "tdma"; + bias-disable; }; }; @@ -677,6 +779,7 @@ mux { groups = "tdma_dout0_x15"; function = "tdma"; + bias-disable; }; }; @@ -684,6 +787,7 @@ mux { groups = "tdma_dout1"; function = "tdma"; + bias-disable; }; }; @@ -691,6 +795,7 @@ mux { groups = "tdma_din1"; function = "tdma"; + bias-disable; }; }; @@ -698,6 +803,7 @@ mux { groups = "tdma_fs"; function = "tdma"; + bias-disable; }; }; @@ -705,6 +811,7 @@ mux { groups = "tdma_fs_slv"; function = "tdma"; + bias-disable; }; }; @@ -712,6 +819,7 @@ mux { groups = "tdma_sclk"; function = "tdma"; + bias-disable; }; }; @@ -719,6 +827,7 @@ mux { groups = "tdma_sclk_slv"; function = "tdma"; + bias-disable; }; }; @@ -726,6 +835,7 @@ mux { groups = "tdmb_din0"; function = "tdmb"; + bias-disable; }; }; @@ -733,6 +843,7 @@ mux { groups = "tdmb_din1"; function = "tdmb"; + bias-disable; }; }; @@ -740,6 +851,7 @@ mux { groups = "tdmb_din2"; function = "tdmb"; + bias-disable; }; }; @@ -747,6 +859,7 @@ mux { groups = "tdmb_din3"; function = "tdmb"; + bias-disable; }; }; @@ -754,6 +867,7 @@ mux { groups = "tdmb_dout0"; function = "tdmb"; + bias-disable; }; }; @@ -761,6 +875,7 @@ mux { groups = "tdmb_dout1"; function = "tdmb"; + bias-disable; }; }; @@ -768,6 +883,7 @@ mux { groups = "tdmb_dout2"; function = "tdmb"; + bias-disable; }; }; @@ -775,6 +891,7 @@ mux { groups = "tdmb_dout3"; function = "tdmb"; + bias-disable; }; }; @@ -782,6 +899,7 @@ mux { groups = "tdmb_fs"; function = "tdmb"; + bias-disable; }; }; @@ -789,6 +907,7 @@ mux { groups = "tdmb_fs_slv"; function = "tdmb"; + bias-disable; }; }; @@ -796,6 +915,7 @@ mux { groups = "tdmb_sclk"; function = "tdmb"; + bias-disable; }; }; @@ -803,6 +923,7 @@ mux { groups = "tdmb_sclk_slv"; function = "tdmb"; + bias-disable; }; }; @@ -810,6 +931,7 @@ mux { groups = "tdmc_fs"; function = "tdmc"; + bias-disable; }; }; @@ -817,6 +939,7 @@ mux { groups = "tdmc_fs_slv"; function = "tdmc"; + bias-disable; }; }; @@ -824,6 +947,7 @@ mux { groups = "tdmc_sclk"; function = "tdmc"; + bias-disable; }; }; @@ -831,6 +955,7 @@ mux { groups = "tdmc_sclk_slv"; function = "tdmc"; + bias-disable; }; }; @@ -838,6 +963,7 @@ mux { groups = "tdmc_din0"; function = "tdmc"; + bias-disable; }; }; @@ -845,6 +971,7 @@ mux { groups = "tdmc_din1"; function = "tdmc"; + bias-disable; }; }; @@ -852,6 +979,7 @@ mux { groups = "tdmc_din2"; function = "tdmc"; + bias-disable; }; }; @@ -859,6 +987,7 @@ mux { groups = "tdmc_din3"; function = "tdmc"; + bias-disable; }; }; @@ -866,6 +995,7 @@ mux { groups = "tdmc_dout0"; function = "tdmc"; + bias-disable; }; }; @@ -873,6 +1003,7 @@ mux { groups = "tdmc_dout1"; function = "tdmc"; + bias-disable; }; }; @@ -880,6 +1011,7 @@ mux { groups = "tdmc_dout2"; function = "tdmc"; + bias-disable; }; }; @@ -887,6 +1019,7 @@ mux { groups = "tdmc_dout3"; function = "tdmc"; + bias-disable; }; }; @@ -895,6 +1028,7 @@ groups = "uart_tx_a", "uart_rx_a"; function = "uart_a"; + bias-disable; }; }; @@ -903,6 +1037,7 @@ groups = "uart_cts_a", "uart_rts_a"; function = "uart_a"; + bias-disable; }; }; @@ -911,6 +1046,7 @@ groups = "uart_tx_b_x", "uart_rx_b_x"; function = "uart_b"; + bias-disable; }; }; @@ -919,6 +1055,7 @@ groups = "uart_cts_b_x", "uart_rts_b_x"; function = "uart_b"; + bias-disable; }; }; @@ -927,6 +1064,7 @@ groups = "uart_tx_b_z", "uart_rx_b_z"; function = "uart_b"; + bias-disable; }; }; @@ -935,6 +1073,7 @@ groups = "uart_cts_b_z", "uart_rts_b_z"; function = "uart_b"; + bias-disable; }; }; @@ -943,6 +1082,7 @@ groups = "uart_ao_tx_b_z", "uart_ao_rx_b_z"; function = "uart_ao_b_z"; + bias-disable; }; }; @@ -951,6 +1091,7 @@ groups = "uart_ao_cts_b_z", "uart_ao_rts_b_z"; function = "uart_ao_b_z"; + bias-disable; }; }; }; @@ -971,13 +1112,15 @@ clkc: clock-controller { compatible = "amlogic,axg-clkc"; #clock-cells = <1>; + clocks = <&xtal>; + clock-names = "xtal"; }; }; }; - mailbox: mailbox@ff63dc00 { - compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu"; - reg = <0 0xff63dc00 0 0x400>; + mailbox: mailbox@ff63c404 { + compatible = "amlogic,meson-gxbb-mhu"; + reg = <0 0xff63c404 0 0x4c>; interrupts = , , ; @@ -1020,67 +1163,73 @@ toddr_a: audio-controller@100 { compatible = "amlogic,axg-toddr"; - reg = <0x0 0x100 0x0 0x1c>; + reg = <0x0 0x100 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "TODDR_A"; interrupts = ; clocks = <&clkc_audio AUD_CLKID_TODDR_A>; resets = <&arb AXG_ARB_TODDR_A>; + amlogic,fifo-depth = <512>; status = "disabled"; }; toddr_b: audio-controller@140 { compatible = "amlogic,axg-toddr"; - reg = <0x0 0x140 0x0 0x1c>; + reg = <0x0 0x140 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "TODDR_B"; interrupts = ; clocks = <&clkc_audio AUD_CLKID_TODDR_B>; resets = <&arb AXG_ARB_TODDR_B>; + amlogic,fifo-depth = <256>; status = "disabled"; }; toddr_c: audio-controller@180 { compatible = "amlogic,axg-toddr"; - reg = <0x0 0x180 0x0 0x1c>; + reg = <0x0 0x180 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "TODDR_C"; interrupts = ; clocks = <&clkc_audio AUD_CLKID_TODDR_C>; resets = <&arb AXG_ARB_TODDR_C>; + amlogic,fifo-depth = <256>; status = "disabled"; }; frddr_a: audio-controller@1c0 { compatible = "amlogic,axg-frddr"; - reg = <0x0 0x1c0 0x0 0x1c>; + reg = <0x0 0x1c0 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "FRDDR_A"; interrupts = ; clocks = <&clkc_audio AUD_CLKID_FRDDR_A>; resets = <&arb AXG_ARB_FRDDR_A>; + amlogic,fifo-depth = <512>; status = "disabled"; }; frddr_b: audio-controller@200 { compatible = "amlogic,axg-frddr"; - reg = <0x0 0x200 0x0 0x1c>; + reg = <0x0 0x200 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "FRDDR_B"; interrupts = ; clocks = <&clkc_audio AUD_CLKID_FRDDR_B>; resets = <&arb AXG_ARB_FRDDR_B>; + amlogic,fifo-depth = <256>; status = "disabled"; }; frddr_c: audio-controller@240 { compatible = "amlogic,axg-frddr"; - reg = <0x0 0x240 0x0 0x1c>; + reg = <0x0 0x240 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "FRDDR_C"; interrupts = ; clocks = <&clkc_audio AUD_CLKID_FRDDR_C>; resets = <&arb AXG_ARB_FRDDR_C>; + amlogic,fifo-depth = <256>; status = "disabled"; }; @@ -1147,6 +1296,18 @@ status = "disabled"; }; + spdifin: audio-controller@400 { + compatible = "amlogic,axg-spdifin"; + reg = <0x0 0x400 0x0 0x30>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFIN"; + interrupts = ; + clocks = <&clkc_audio AUD_CLKID_SPDIFIN>, + <&clkc_audio AUD_CLKID_SPDIFIN_CLK>; + clock-names = "pclk", "refclk"; + status = "disabled"; + }; + spdifout: audio-controller@480 { compatible = "amlogic,axg-spdifout"; reg = <0x0 0x480 0x0 0x50>; @@ -1216,6 +1377,8 @@ compatible = "amlogic,meson-axg-aoclkc"; #clock-cells = <1>; #reset-cells = <1>; + clocks = <&xtal>, <&clkc CLKID_CLK81>; + clock-names = "xtal", "mpeg-clk"; }; }; @@ -1239,6 +1402,7 @@ mux { groups = "i2c_ao_sck_4"; function = "i2c_ao"; + bias-disable; }; }; @@ -1246,6 +1410,7 @@ mux { groups = "i2c_ao_sck_8"; function = "i2c_ao"; + bias-disable; }; }; @@ -1253,6 +1418,7 @@ mux { groups = "i2c_ao_sck_10"; function = "i2c_ao"; + bias-disable; }; }; @@ -1260,6 +1426,7 @@ mux { groups = "i2c_ao_sda_5"; function = "i2c_ao"; + bias-disable; }; }; @@ -1267,6 +1434,7 @@ mux { groups = "i2c_ao_sda_9"; function = "i2c_ao"; + bias-disable; }; }; @@ -1274,6 +1442,7 @@ mux { groups = "i2c_ao_sda_11"; function = "i2c_ao"; + bias-disable; }; }; @@ -1281,6 +1450,7 @@ mux { groups = "remote_input_ao"; function = "remote_input_ao"; + bias-disable; }; }; @@ -1289,6 +1459,7 @@ groups = "uart_ao_tx_a", "uart_ao_rx_a"; function = "uart_ao_a"; + bias-disable; }; }; @@ -1297,6 +1468,7 @@ groups = "uart_ao_cts_a", "uart_ao_rts_a"; function = "uart_ao_a"; + bias-disable; }; }; @@ -1305,6 +1477,7 @@ groups = "uart_ao_tx_b", "uart_ao_rx_b"; function = "uart_ao_b"; + bias-disable; }; }; @@ -1313,6 +1486,7 @@ groups = "uart_ao_cts_b", "uart_ao_rts_b"; function = "uart_ao_b"; + bias-disable; }; }; }; @@ -1414,12 +1588,18 @@ }; gpio_intc: interrupt-controller@f080 { - compatible = "amlogic,meson-gpio-intc"; + compatible = "amlogic,meson-axg-gpio-intc", + "amlogic,meson-gpio-intc"; reg = <0x0 0xf080 0x0 0x10>; interrupt-controller; #interrupt-cells = <2>; amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; - status = "disabled"; + }; + + watchdog@f0d0 { + compatible = "amlogic,meson-gxbb-wdt"; + reg = <0x0 0xf0d0 0x0 0x10>; + clocks = <&xtal>; }; pwm_ab: pwm@1b000 { @@ -1458,6 +1638,11 @@ status = "disabled"; }; + clk_msr: clock-measure@18000 { + compatible = "amlogic,meson-axg-clk-measure"; + reg = <0x0 0x18000 0x0 0x10>; + }; + i2c3: i2c@1c000 { compatible = "amlogic,meson-axg-i2c"; reg = <0x0 0x1c000 0x0 0x20>; @@ -1556,12 +1741,12 @@ #size-cells = <1>; ranges = <0 0x0 0xfffc0000 0x20000>; - cpu_scp_lpri: scp-shmem@0 { + cpu_scp_lpri: scp-shmem@13000 { compatible = "amlogic,meson-axg-scp-shmem"; reg = <0x13000 0x400>; }; - cpu_scp_hpri: scp-shmem@200 { + cpu_scp_hpri: scp-shmem@13400 { compatible = "amlogic,meson-axg-scp-shmem"; reg = <0x13400 0x400>; }; diff --git a/arch/arm/dts/meson-g12-common.dtsi b/arch/arm/dts/meson-g12-common.dtsi index 3f39e020f7..abe04f4ad7 100644 --- a/arch/arm/dts/meson-g12-common.dtsi +++ b/arch/arm/dts/meson-g12-common.dtsi @@ -5,51 +5,42 @@ #include #include -#include #include #include #include #include -#include -#include #include +#include / { interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; - tdmif_a: audio-controller-0 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_A"; - clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, - <&clkc_audio AUD_CLKID_MST_A_SCLK>, - <&clkc_audio AUD_CLKID_MST_A_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; - tdmif_b: audio-controller-1 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_B"; - clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>, - <&clkc_audio AUD_CLKID_MST_B_SCLK>, - <&clkc_audio AUD_CLKID_MST_B_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; + simplefb_cvbs: framebuffer-cvbs { + compatible = "amlogic,simple-framebuffer", + "simple-framebuffer"; + amlogic,pipeline = "vpu-cvbs"; + clocks = <&clkc CLKID_HDMI>, + <&clkc CLKID_HTX_PCLK>, + <&clkc CLKID_VPU_INTR>; + status = "disabled"; + }; - tdmif_c: audio-controller-2 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_C"; - clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>, - <&clkc_audio AUD_CLKID_MST_C_SCLK>, - <&clkc_audio AUD_CLKID_MST_C_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; + simplefb_hdmi: framebuffer-hdmi { + compatible = "amlogic,simple-framebuffer", + "simple-framebuffer"; + amlogic,pipeline = "vpu-hdmi"; + clocks = <&clkc CLKID_HDMI>, + <&clkc CLKID_HTX_PCLK>, + <&clkc CLKID_VPU_INTR>; + status = "disabled"; + }; }; efuse: efuse { @@ -58,6 +49,7 @@ #address-cells = <1>; #size-cells = <1>; read-only; + secure-monitor = <&sm>; }; psci { @@ -95,6 +87,94 @@ #size-cells = <2>; ranges; + pcie: pcie@fc000000 { + compatible = "amlogic,g12a-pcie", "snps,dw-pcie"; + reg = <0x0 0xfc000000 0x0 0x400000 + 0x0 0xff648000 0x0 0x2000 + 0x0 0xfc400000 0x0 0x200000>; + reg-names = "elbi", "cfg", "config"; + interrupts = ; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + bus-range = <0x0 0xff>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x0 0xfc600000 0 0x00100000 + 0x82000000 0 0xfc700000 0x0 0xfc700000 0 0x1900000>; + + clocks = <&clkc CLKID_PCIE_PHY + &clkc CLKID_PCIE_COMB + &clkc CLKID_PCIE_PLL>; + clock-names = "general", + "pclk", + "port"; + resets = <&reset RESET_PCIE_CTRL_A>, + <&reset RESET_PCIE_APB>; + reset-names = "port", + "apb"; + num-lanes = <1>; + phys = <&usb3_pcie_phy PHY_TYPE_PCIE>; + phy-names = "pcie"; + status = "disabled"; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay = <1000>; + polling-delay-passive = <100>; + thermal-sensors = <&cpu_temp>; + + trips { + cpu_passive: cpu-passive { + temperature = <85000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + + cpu_hot: cpu-hot { + temperature = <95000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "hot"; + }; + + cpu_critical: cpu-critical { + temperature = <110000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + }; + + ddr_thermal: ddr-thermal { + polling-delay = <1000>; + polling-delay-passive = <100>; + thermal-sensors = <&ddr_temp>; + + trips { + ddr_passive: ddr-passive { + temperature = <85000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + + ddr_critical: ddr-critical { + temperature = <110000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + map { + trip = <&ddr_passive>; + cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + ethmac: ethernet@ff3f0000 { compatible = "amlogic,meson-axg-dwmac", "snps,dwmac-3.70a", @@ -1356,6 +1436,26 @@ }; }; + cpu_temp: temperature-sensor@34800 { + compatible = "amlogic,g12a-cpu-thermal", + "amlogic,g12a-thermal"; + reg = <0x0 0x34800 0x0 0x50>; + interrupts = ; + clocks = <&clkc CLKID_TS>; + #thermal-sensor-cells = <0>; + amlogic,ao-secure = <&sec_AO>; + }; + + ddr_temp: temperature-sensor@34c00 { + compatible = "amlogic,g12a-ddr-thermal", + "amlogic,g12a-thermal"; + reg = <0x0 0x34c00 0x0 0x50>; + interrupts = ; + clocks = <&clkc CLKID_TS>; + #thermal-sensor-cells = <0>; + amlogic,ao-secure = <&sec_AO>; + }; + usb2_phy0: phy@36000 { compatible = "amlogic,g12a-usb2-phy"; reg = <0x0 0x36000 0x0 0x2000>; @@ -1457,290 +1557,6 @@ }; }; - pdm: audio-controller@40000 { - compatible = "amlogic,g12a-pdm", - "amlogic,axg-pdm"; - reg = <0x0 0x40000 0x0 0x34>; - #sound-dai-cells = <0>; - sound-name-prefix = "PDM"; - clocks = <&clkc_audio AUD_CLKID_PDM>, - <&clkc_audio AUD_CLKID_PDM_DCLK>, - <&clkc_audio AUD_CLKID_PDM_SYSCLK>; - clock-names = "pclk", "dclk", "sysclk"; - status = "disabled"; - }; - - audio: bus@42000 { - compatible = "simple-bus"; - reg = <0x0 0x42000 0x0 0x2000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x42000 0x0 0x2000>; - - clkc_audio: clock-controller@0 { - status = "disabled"; - compatible = "amlogic,g12a-audio-clkc"; - reg = <0x0 0x0 0x0 0xb4>; - #clock-cells = <1>; - #reset-cells = <1>; - - clocks = <&clkc CLKID_AUDIO>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>, - <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL3>, - <&clkc CLKID_HIFI_PLL>, - <&clkc CLKID_FCLK_DIV3>, - <&clkc CLKID_FCLK_DIV4>, - <&clkc CLKID_GP0_PLL>; - clock-names = "pclk", - "mst_in0", - "mst_in1", - "mst_in2", - "mst_in3", - "mst_in4", - "mst_in5", - "mst_in6", - "mst_in7"; - - resets = <&reset RESET_AUDIO>; - }; - - toddr_a: audio-controller@100 { - compatible = "amlogic,g12a-toddr", - "amlogic,axg-toddr"; - reg = <0x0 0x100 0x0 0x1c>; - #sound-dai-cells = <0>; - sound-name-prefix = "TODDR_A"; - interrupts = ; - clocks = <&clkc_audio AUD_CLKID_TODDR_A>; - resets = <&arb AXG_ARB_TODDR_A>; - status = "disabled"; - }; - - toddr_b: audio-controller@140 { - compatible = "amlogic,g12a-toddr", - "amlogic,axg-toddr"; - reg = <0x0 0x140 0x0 0x1c>; - #sound-dai-cells = <0>; - sound-name-prefix = "TODDR_B"; - interrupts = ; - clocks = <&clkc_audio AUD_CLKID_TODDR_B>; - resets = <&arb AXG_ARB_TODDR_B>; - status = "disabled"; - }; - - toddr_c: audio-controller@180 { - compatible = "amlogic,g12a-toddr", - "amlogic,axg-toddr"; - reg = <0x0 0x180 0x0 0x1c>; - #sound-dai-cells = <0>; - sound-name-prefix = "TODDR_C"; - interrupts = ; - clocks = <&clkc_audio AUD_CLKID_TODDR_C>; - resets = <&arb AXG_ARB_TODDR_C>; - status = "disabled"; - }; - - frddr_a: audio-controller@1c0 { - compatible = "amlogic,g12a-frddr", - "amlogic,axg-frddr"; - reg = <0x0 0x1c0 0x0 0x1c>; - #sound-dai-cells = <0>; - sound-name-prefix = "FRDDR_A"; - interrupts = ; - clocks = <&clkc_audio AUD_CLKID_FRDDR_A>; - resets = <&arb AXG_ARB_FRDDR_A>; - status = "disabled"; - }; - - frddr_b: audio-controller@200 { - compatible = "amlogic,g12a-frddr", - "amlogic,axg-frddr"; - reg = <0x0 0x200 0x0 0x1c>; - #sound-dai-cells = <0>; - sound-name-prefix = "FRDDR_B"; - interrupts = ; - clocks = <&clkc_audio AUD_CLKID_FRDDR_B>; - resets = <&arb AXG_ARB_FRDDR_B>; - status = "disabled"; - }; - - frddr_c: audio-controller@240 { - compatible = "amlogic,g12a-frddr", - "amlogic,axg-frddr"; - reg = <0x0 0x240 0x0 0x1c>; - #sound-dai-cells = <0>; - sound-name-prefix = "FRDDR_C"; - interrupts = ; - clocks = <&clkc_audio AUD_CLKID_FRDDR_C>; - resets = <&arb AXG_ARB_FRDDR_C>; - status = "disabled"; - }; - - arb: reset-controller@280 { - status = "disabled"; - compatible = "amlogic,meson-axg-audio-arb"; - reg = <0x0 0x280 0x0 0x4>; - #reset-cells = <1>; - clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; - }; - - tdmin_a: audio-controller@300 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x300 0x0 0x40>; - sound-name-prefix = "TDMIN_A"; - resets = <&clkc_audio AUD_RESET_TDMIN_A>; - clocks = <&clkc_audio AUD_CLKID_TDMIN_A>, - <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_b: audio-controller@340 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x340 0x0 0x40>; - sound-name-prefix = "TDMIN_B"; - resets = <&clkc_audio AUD_RESET_TDMIN_B>; - clocks = <&clkc_audio AUD_CLKID_TDMIN_B>, - <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_c: audio-controller@380 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x380 0x0 0x40>; - sound-name-prefix = "TDMIN_C"; - resets = <&clkc_audio AUD_RESET_TDMIN_C>; - clocks = <&clkc_audio AUD_CLKID_TDMIN_C>, - <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_lb: audio-controller@3c0 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x3c0 0x0 0x40>; - sound-name-prefix = "TDMIN_LB"; - resets = <&clkc_audio AUD_RESET_TDMIN_LB>; - clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>, - <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - spdifin: audio-controller@400 { - compatible = "amlogic,g12a-spdifin", - "amlogic,axg-spdifin"; - reg = <0x0 0x400 0x0 0x30>; - #sound-dai-cells = <0>; - sound-name-prefix = "SPDIFIN"; - interrupts = ; - clocks = <&clkc_audio AUD_CLKID_SPDIFIN>, - <&clkc_audio AUD_CLKID_SPDIFIN_CLK>; - clock-names = "pclk", "refclk"; - status = "disabled"; - }; - - spdifout: audio-controller@480 { - compatible = "amlogic,g12a-spdifout", - "amlogic,axg-spdifout"; - reg = <0x0 0x480 0x0 0x50>; - #sound-dai-cells = <0>; - sound-name-prefix = "SPDIFOUT"; - clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, - <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; - clock-names = "pclk", "mclk"; - status = "disabled"; - }; - - tdmout_a: audio-controller@500 { - compatible = "amlogic,g12a-tdmout"; - reg = <0x0 0x500 0x0 0x40>; - sound-name-prefix = "TDMOUT_A"; - resets = <&clkc_audio AUD_RESET_TDMOUT_A>; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, - <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmout_b: audio-controller@540 { - compatible = "amlogic,g12a-tdmout"; - reg = <0x0 0x540 0x0 0x40>; - sound-name-prefix = "TDMOUT_B"; - resets = <&clkc_audio AUD_RESET_TDMOUT_B>; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>, - <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmout_c: audio-controller@580 { - compatible = "amlogic,g12a-tdmout"; - reg = <0x0 0x580 0x0 0x40>; - sound-name-prefix = "TDMOUT_C"; - resets = <&clkc_audio AUD_RESET_TDMOUT_C>; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>, - <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - spdifout_b: audio-controller@680 { - compatible = "amlogic,g12a-spdifout", - "amlogic,axg-spdifout"; - reg = <0x0 0x680 0x0 0x50>; - #sound-dai-cells = <0>; - sound-name-prefix = "SPDIFOUT_B"; - clocks = <&clkc_audio AUD_CLKID_SPDIFOUT_B>, - <&clkc_audio AUD_CLKID_SPDIFOUT_B_CLK>; - clock-names = "pclk", "mclk"; - status = "disabled"; - }; - - tohdmitx: audio-controller@744 { - compatible = "amlogic,g12a-tohdmitx"; - reg = <0x0 0x744 0x0 0x4>; - #sound-dai-cells = <1>; - sound-name-prefix = "TOHDMITX"; - status = "disabled"; - }; - }; - usb3_pcie_phy: phy@46000 { compatible = "amlogic,g12a-usb3-pcie-phy"; reg = <0x0 0x46000 0x0 0x2000>; @@ -2152,6 +1968,29 @@ }; }; + vdec: video-decoder@ff620000 { + compatible = "amlogic,g12a-vdec"; + reg = <0x0 0xff620000 0x0 0x10000>, + <0x0 0xffd0e180 0x0 0xe4>; + reg-names = "dos", "esparser"; + interrupts = , + ; + interrupt-names = "vdec", "esparser"; + + amlogic,ao-sysctrl = <&rti>; + amlogic,canvas = <&canvas>; + + clocks = <&clkc CLKID_PARSER>, + <&clkc CLKID_DOS>, + <&clkc CLKID_VDEC_1>, + <&clkc CLKID_VDEC_HEVC>, + <&clkc CLKID_VDEC_HEVCF>; + clock-names = "dos_parser", "dos", "vdec_1", + "vdec_hevc", "vdec_hevcf"; + resets = <&reset RESET_PARSER>; + reset-names = "esparser"; + }; + vpu: vpu@ff900000 { compatible = "amlogic,meson-g12a-vpu"; reg = <0x0 0xff900000 0x0 0x100000>, @@ -2388,10 +2227,10 @@ compatible = "amlogic,meson-g12a-mali", "arm,mali-bifrost"; reg = <0x0 0xffe40000 0x0 0x40000>; interrupt-parent = <&gic>; - interrupts = , + interrupts = , , - ; - interrupt-names = "gpu", "mmu", "job"; + ; + interrupt-names = "job", "mmu", "gpu"; clocks = <&clkc CLKID_MALI>; resets = <&reset RESET_DVALIN_CAPB3>, <&reset RESET_DVALIN>; @@ -2409,6 +2248,7 @@ assigned-clock-rates = <0>, /* Do Nothing */ <800000000>, <0>; /* Do Nothing */ + #cooling-cells = <2>; }; }; diff --git a/arch/arm/dts/meson-g12.dtsi b/arch/arm/dts/meson-g12.dtsi new file mode 100644 index 0000000000..03054c4788 --- /dev/null +++ b/arch/arm/dts/meson-g12.dtsi @@ -0,0 +1,398 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Jerome Brunet + */ + +#include "meson-g12-common.dtsi" +#include +#include +#include +#include + +/ { + tdmif_a: audio-controller-0 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_A"; + clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, + <&clkc_audio AUD_CLKID_MST_A_SCLK>, + <&clkc_audio AUD_CLKID_MST_A_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + + tdmif_b: audio-controller-1 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_B"; + clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>, + <&clkc_audio AUD_CLKID_MST_B_SCLK>, + <&clkc_audio AUD_CLKID_MST_B_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + + tdmif_c: audio-controller-2 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_C"; + clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>, + <&clkc_audio AUD_CLKID_MST_C_SCLK>, + <&clkc_audio AUD_CLKID_MST_C_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; +}; + +&apb { + pdm: audio-controller@40000 { + compatible = "amlogic,g12a-pdm", + "amlogic,axg-pdm"; + reg = <0x0 0x40000 0x0 0x34>; + #sound-dai-cells = <0>; + sound-name-prefix = "PDM"; + clocks = <&clkc_audio AUD_CLKID_PDM>, + <&clkc_audio AUD_CLKID_PDM_DCLK>, + <&clkc_audio AUD_CLKID_PDM_SYSCLK>; + clock-names = "pclk", "dclk", "sysclk"; + status = "disabled"; + }; + + audio: bus@42000 { + compatible = "simple-bus"; + reg = <0x0 0x42000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x42000 0x0 0x2000>; + + clkc_audio: clock-controller@0 { + status = "disabled"; + compatible = "amlogic,g12a-audio-clkc"; + reg = <0x0 0x0 0x0 0xb4>; + #clock-cells = <1>; + #reset-cells = <1>; + + clocks = <&clkc CLKID_AUDIO>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL3>, + <&clkc CLKID_HIFI_PLL>, + <&clkc CLKID_FCLK_DIV3>, + <&clkc CLKID_FCLK_DIV4>, + <&clkc CLKID_GP0_PLL>; + clock-names = "pclk", + "mst_in0", + "mst_in1", + "mst_in2", + "mst_in3", + "mst_in4", + "mst_in5", + "mst_in6", + "mst_in7"; + + resets = <&reset RESET_AUDIO>; + }; + + toddr_a: audio-controller@100 { + compatible = "amlogic,g12a-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x100 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_A"; + interrupts = ; + clocks = <&clkc_audio AUD_CLKID_TODDR_A>; + resets = <&arb AXG_ARB_TODDR_A>, + <&clkc_audio AUD_RESET_TODDR_A>; + reset-names = "arb", "rst"; + amlogic,fifo-depth = <512>; + status = "disabled"; + }; + + toddr_b: audio-controller@140 { + compatible = "amlogic,g12a-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x140 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_B"; + interrupts = ; + clocks = <&clkc_audio AUD_CLKID_TODDR_B>; + resets = <&arb AXG_ARB_TODDR_B>, + <&clkc_audio AUD_RESET_TODDR_B>; + reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; + status = "disabled"; + }; + + toddr_c: audio-controller@180 { + compatible = "amlogic,g12a-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x180 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_C"; + interrupts = ; + clocks = <&clkc_audio AUD_CLKID_TODDR_C>; + resets = <&arb AXG_ARB_TODDR_C>, + <&clkc_audio AUD_RESET_TODDR_C>; + reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; + status = "disabled"; + }; + + frddr_a: audio-controller@1c0 { + compatible = "amlogic,g12a-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x1c0 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_A"; + interrupts = ; + clocks = <&clkc_audio AUD_CLKID_FRDDR_A>; + resets = <&arb AXG_ARB_FRDDR_A>, + <&clkc_audio AUD_RESET_FRDDR_A>; + reset-names = "arb", "rst"; + amlogic,fifo-depth = <512>; + status = "disabled"; + }; + + frddr_b: audio-controller@200 { + compatible = "amlogic,g12a-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x200 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_B"; + interrupts = ; + clocks = <&clkc_audio AUD_CLKID_FRDDR_B>; + resets = <&arb AXG_ARB_FRDDR_B>, + <&clkc_audio AUD_RESET_FRDDR_B>; + reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; + status = "disabled"; + }; + + frddr_c: audio-controller@240 { + compatible = "amlogic,g12a-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x240 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_C"; + interrupts = ; + clocks = <&clkc_audio AUD_CLKID_FRDDR_C>; + resets = <&arb AXG_ARB_FRDDR_C>, + <&clkc_audio AUD_RESET_FRDDR_C>; + reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; + status = "disabled"; + }; + + arb: reset-controller@280 { + status = "disabled"; + compatible = "amlogic,meson-axg-audio-arb"; + reg = <0x0 0x280 0x0 0x4>; + #reset-cells = <1>; + clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; + }; + + tdmin_a: audio-controller@300 { + compatible = "amlogic,g12a-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x300 0x0 0x40>; + sound-name-prefix = "TDMIN_A"; + resets = <&clkc_audio AUD_RESET_TDMIN_A>; + clocks = <&clkc_audio AUD_CLKID_TDMIN_A>, + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_b: audio-controller@340 { + compatible = "amlogic,g12a-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x340 0x0 0x40>; + sound-name-prefix = "TDMIN_B"; + resets = <&clkc_audio AUD_RESET_TDMIN_B>; + clocks = <&clkc_audio AUD_CLKID_TDMIN_B>, + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_c: audio-controller@380 { + compatible = "amlogic,g12a-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x380 0x0 0x40>; + sound-name-prefix = "TDMIN_C"; + resets = <&clkc_audio AUD_RESET_TDMIN_C>; + clocks = <&clkc_audio AUD_CLKID_TDMIN_C>, + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_lb: audio-controller@3c0 { + compatible = "amlogic,g12a-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x3c0 0x0 0x40>; + sound-name-prefix = "TDMIN_LB"; + resets = <&clkc_audio AUD_RESET_TDMIN_LB>; + clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>, + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + spdifin: audio-controller@400 { + compatible = "amlogic,g12a-spdifin", + "amlogic,axg-spdifin"; + reg = <0x0 0x400 0x0 0x30>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFIN"; + interrupts = ; + clocks = <&clkc_audio AUD_CLKID_SPDIFIN>, + <&clkc_audio AUD_CLKID_SPDIFIN_CLK>; + clock-names = "pclk", "refclk"; + resets = <&clkc_audio AUD_RESET_SPDIFIN>; + status = "disabled"; + }; + + spdifout: audio-controller@480 { + compatible = "amlogic,g12a-spdifout", + "amlogic,axg-spdifout"; + reg = <0x0 0x480 0x0 0x50>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFOUT"; + clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, + <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; + clock-names = "pclk", "mclk"; + resets = <&clkc_audio AUD_RESET_SPDIFOUT>; + status = "disabled"; + }; + + tdmout_a: audio-controller@500 { + compatible = "amlogic,g12a-tdmout"; + reg = <0x0 0x500 0x0 0x40>; + sound-name-prefix = "TDMOUT_A"; + resets = <&clkc_audio AUD_RESET_TDMOUT_A>; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_b: audio-controller@540 { + compatible = "amlogic,g12a-tdmout"; + reg = <0x0 0x540 0x0 0x40>; + sound-name-prefix = "TDMOUT_B"; + resets = <&clkc_audio AUD_RESET_TDMOUT_B>; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>, + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_c: audio-controller@580 { + compatible = "amlogic,g12a-tdmout"; + reg = <0x0 0x580 0x0 0x40>; + sound-name-prefix = "TDMOUT_C"; + resets = <&clkc_audio AUD_RESET_TDMOUT_C>; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>, + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + spdifout_b: audio-controller@680 { + compatible = "amlogic,g12a-spdifout", + "amlogic,axg-spdifout"; + reg = <0x0 0x680 0x0 0x50>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFOUT_B"; + clocks = <&clkc_audio AUD_CLKID_SPDIFOUT_B>, + <&clkc_audio AUD_CLKID_SPDIFOUT_B_CLK>; + clock-names = "pclk", "mclk"; + resets = <&clkc_audio AUD_RESET_SPDIFOUT_B>; + status = "disabled"; + }; + + tohdmitx: audio-controller@744 { + compatible = "amlogic,g12a-tohdmitx"; + reg = <0x0 0x744 0x0 0x4>; + #sound-dai-cells = <1>; + sound-name-prefix = "TOHDMITX"; + resets = <&clkc_audio AUD_RESET_TOHDMITX>; + status = "disabled"; + }; + }; +}; + +&cpu_thermal { + cooling-maps { + map0 { + trip = <&cpu_passive>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu_hot>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + +ðmac { + power-domains = <&pwrc PWRC_G12A_ETH_ID>; +}; + +&vpu { + power-domains = <&pwrc PWRC_G12A_VPU_ID>; +}; + +&sd_emmc_a { + amlogic,dram-access-quirk; +}; + +&simplefb_cvbs { + power-domains = <&pwrc PWRC_G12A_VPU_ID>; +}; + +&simplefb_hdmi { + power-domains = <&pwrc PWRC_G12A_VPU_ID>; +}; + diff --git a/arch/arm/dts/meson-g12a-sei510.dts b/arch/arm/dts/meson-g12a-sei510.dts index c7a8736885..2ac9e3a43b 100644 --- a/arch/arm/dts/meson-g12a-sei510.dts +++ b/arch/arm/dts/meson-g12a-sei510.dts @@ -129,6 +129,25 @@ enable-active-high; }; + vddcpu: regulator-vddcpu { + /* + * SY8120B1ABC DC/DC Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU"; + regulator-min-microvolt = <721000>; + regulator-max-microvolt = <1022000>; + + vin-supply = <&dc_in>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + vddio_ao1v8: regulator-vddio_ao1v8 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO1V8"; @@ -297,6 +316,34 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu2 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu3 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + &cvbs_vdac_port { cvbs_vdac_out: endpoint { remote-endpoint = <&cvbs_connector_in>; @@ -339,6 +386,20 @@ pinctrl-names = "default"; }; +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + &pwm_ef { status = "okay"; pinctrl-0 = <&pwm_e_pins>; @@ -377,6 +438,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; diff --git a/arch/arm/dts/meson-g12a-u200.dts b/arch/arm/dts/meson-g12a-u200.dts index 8551fbd4a4..2a324f0136 100644 --- a/arch/arm/dts/meson-g12a-u200.dts +++ b/arch/arm/dts/meson-g12a-u200.dts @@ -129,6 +129,24 @@ regulator-always-on; }; + vddcpu: regulator-vddcpu { + /* + * MP8756GD Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU"; + regulator-min-microvolt = <721000>; + regulator-max-microvolt = <1022000>; + + vin-supply = <&main_12v>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; }; &cec_AO { @@ -145,6 +163,34 @@ hdmi-phandle = <&hdmi_tx>; }; +&cpu0 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu2 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu3 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + &cvbs_vdac_port { cvbs_vdac_out: endpoint { remote-endpoint = <&cvbs_connector_in>; @@ -197,6 +243,14 @@ pinctrl-names = "default"; }; +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + /* SD card */ &sd_emmc_b { status = "okay"; diff --git a/arch/arm/dts/meson-g12a.dtsi b/arch/arm/dts/meson-g12a.dtsi index eb5d177d7a..fb0ab27d1f 100644 --- a/arch/arm/dts/meson-g12a.dtsi +++ b/arch/arm/dts/meson-g12a.dtsi @@ -3,8 +3,7 @@ * Copyright (c) 2018 Amlogic, Inc. All rights reserved. */ -#include "meson-g12-common.dtsi" -#include +#include "meson-g12.dtsi" / { compatible = "amlogic,g12a"; @@ -19,6 +18,7 @@ reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu1: cpu@1 { @@ -27,6 +27,7 @@ reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu2: cpu@2 { @@ -35,6 +36,7 @@ reg = <0x0 0x2>; enable-method = "psci"; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu3: cpu@3 { @@ -43,6 +45,7 @@ reg = <0x0 0x3>; enable-method = "psci"; next-level-cache = <&l2>; + #cooling-cells = <2>; }; l2: l2-cache0 { @@ -111,14 +114,22 @@ }; }; -ðmac { - power-domains = <&pwrc PWRC_G12A_ETH_ID>; -}; - -&vpu { - power-domains = <&pwrc PWRC_G12A_VPU_ID>; -}; +&cpu_thermal { + cooling-maps { + map0 { + trip = <&cpu_passive>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; -&sd_emmc_a { - amlogic,dram-access-quirk; + map1 { + trip = <&cpu_hot>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; diff --git a/arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts b/arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts index 3a6a1e0c1e..124a809010 100644 --- a/arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts +++ b/arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts @@ -14,3 +14,28 @@ / { compatible = "khadas,vim3", "amlogic,a311d", "amlogic,g12b"; }; + +/* + * The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential + * lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between + * an USB3.0 Type A connector and a M.2 Key M slot. + * The PHY driving these differential lines is shared between + * the USB3.0 controller and the PCIe Controller, thus only + * a single controller can use it. + * If the MCU is configured to mux the PCIe/USB3.0 differential lines + * to the M.2 Key M slot, uncomment the following block to disable + * USB3.0 from the USB Complex and enable the PCIe controller. + * The End User is not expected to uncomment the following except for + * testing purposes, but instead rely on the firmware/bootloader to + * update these nodes accordingly if PCIe mode is selected by the MCU. + */ +/* +&pcie { + status = "okay"; +}; + +&usb { + phys = <&usb2_phy0>, <&usb2_phy1>; + phy-names = "usb2-phy0", "usb2-phy1"; +}; + */ diff --git a/arch/arm/dts/meson-g12b-odroid-n2.dts b/arch/arm/dts/meson-g12b-odroid-n2.dts index 42f1540575..0e54c1dc28 100644 --- a/arch/arm/dts/meson-g12b-odroid-n2.dts +++ b/arch/arm/dts/meson-g12b-odroid-n2.dts @@ -12,7 +12,7 @@ #include / { - compatible = "hardkernel,odroid-n2", "amlogic,g12b"; + compatible = "hardkernel,odroid-n2", "amlogic,s922x", "amlogic,g12b"; model = "Hardkernel ODROID-N2"; aliases { diff --git a/arch/arm/dts/meson-g12b.dtsi b/arch/arm/dts/meson-g12b.dtsi index 5628ccd545..6dbc396804 100644 --- a/arch/arm/dts/meson-g12b.dtsi +++ b/arch/arm/dts/meson-g12b.dtsi @@ -4,8 +4,7 @@ * Author: Neil Armstrong */ -#include "meson-g12-common.dtsi" -#include +#include "meson-g12.dtsi" / { compatible = "amlogic,g12b"; @@ -49,7 +48,9 @@ compatible = "arm,cortex-a53"; reg = <0x0 0x0>; enable-method = "psci"; + capacity-dmips-mhz = <592>; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu1: cpu@1 { @@ -57,7 +58,9 @@ compatible = "arm,cortex-a53"; reg = <0x0 0x1>; enable-method = "psci"; + capacity-dmips-mhz = <592>; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu100: cpu@100 { @@ -65,7 +68,9 @@ compatible = "arm,cortex-a73"; reg = <0x0 0x100>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu101: cpu@101 { @@ -73,7 +78,9 @@ compatible = "arm,cortex-a73"; reg = <0x0 0x101>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu102: cpu@102 { @@ -81,7 +88,9 @@ compatible = "arm,cortex-a73"; reg = <0x0 0x102>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu103: cpu@103 { @@ -89,7 +98,9 @@ compatible = "arm,cortex-a73"; reg = <0x0 0x103>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; next-level-cache = <&l2>; + #cooling-cells = <2>; }; l2: l2-cache0 { @@ -102,14 +113,3 @@ compatible = "amlogic,g12b-clkc"; }; -ðmac { - power-domains = <&pwrc PWRC_G12A_ETH_ID>; -}; - -&vpu { - power-domains = <&pwrc PWRC_G12A_VPU_ID>; -}; - -&sd_emmc_a { - amlogic,dram-access-quirk; -}; diff --git a/arch/arm/dts/meson-gx.dtsi b/arch/arm/dts/meson-gx.dtsi index f1e5cdbade..40db06e28b 100644 --- a/arch/arm/dts/meson-gx.dtsi +++ b/arch/arm/dts/meson-gx.dtsi @@ -50,13 +50,35 @@ }; }; + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + simplefb_cvbs: framebuffer-cvbs { + compatible = "amlogic,simple-framebuffer", + "simple-framebuffer"; + amlogic,pipeline = "vpu-cvbs"; + power-domains = <&pwrc_vpu>; + status = "disabled"; + }; + + simplefb_hdmi: framebuffer-hdmi { + compatible = "amlogic,simple-framebuffer", + "simple-framebuffer"; + amlogic,pipeline = "vpu-hdmi"; + power-domains = <&pwrc_vpu>; + status = "disabled"; + }; + }; + cpus { #address-cells = <0x2>; #size-cells = <0x0>; cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&l2>; @@ -65,7 +87,7 @@ cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&l2>; @@ -74,7 +96,7 @@ cpu2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x2>; enable-method = "psci"; next-level-cache = <&l2>; @@ -83,7 +105,7 @@ cpu3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x3>; enable-method = "psci"; next-level-cache = <&l2>; @@ -139,6 +161,7 @@ #address-cells = <1>; #size-cells = <1>; read-only; + secure-monitor = <&sm>; sn: sn@14 { reg = <0x14 0x10>; @@ -198,7 +221,7 @@ }; reset: reset-controller@4404 { - compatible = "amlogic,meson-gx-reset", "amlogic,meson-gxbb-reset"; + compatible = "amlogic,meson-gxbb-reset"; reg = <0x0 0x04404 0x0 0x9c>; #reset-cells = <1>; }; @@ -218,7 +241,7 @@ }; i2c_A: i2c@8500 { - compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c"; + compatible = "amlogic,meson-gxbb-i2c"; reg = <0x0 0x08500 0x0 0x20>; interrupts = ; #address-cells = <1>; @@ -262,8 +285,13 @@ status = "disabled"; }; + clock-measure@8758 { + compatible = "amlogic,meson-gx-clk-measure"; + reg = <0x0 0x8758 0x0 0x10>; + }; + i2c_B: i2c@87c0 { - compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c"; + compatible = "amlogic,meson-gxbb-i2c"; reg = <0x0 0x087c0 0x0 0x20>; interrupts = ; #address-cells = <1>; @@ -272,7 +300,7 @@ }; i2c_C: i2c@87e0 { - compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c"; + compatible = "amlogic,meson-gxbb-i2c"; reg = <0x0 0x087e0 0x0 0x20>; interrupts = ; #address-cells = <1>; @@ -290,7 +318,7 @@ }; spifc: spi@8c80 { - compatible = "amlogic,meson-gx-spifc", "amlogic,meson-gxbb-spifc"; + compatible = "amlogic,meson-gxbb-spifc"; reg = <0x0 0x08c80 0x0 0x80>; #address-cells = <1>; #size-cells = <0>; @@ -298,7 +326,7 @@ }; watchdog@98d0 { - compatible = "amlogic,meson-gx-wdt", "amlogic,meson-gxbb-wdt"; + compatible = "amlogic,meson-gxbb-wdt"; reg = <0x0 0x098d0 0x0 0x10>; clocks = <&xtal>; }; @@ -364,6 +392,7 @@ compatible = "amlogic,meson-gx-ao-cec"; reg = <0x0 0x00100 0x0 0x14>; interrupts = ; + status = "disabled"; }; sec_AO: ao-secure@140 { @@ -387,7 +416,7 @@ }; i2c_AO: i2c@500 { - compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c"; + compatible = "amlogic,meson-gxbb-i2c"; reg = <0x0 0x500 0x0 0x20>; interrupts = ; #address-cells = <1>; @@ -410,7 +439,21 @@ }; }; - periphs: periphs@c8834000 { + vdec: video-codec@c8820000 { + compatible = "amlogic,gx-vdec"; + reg = <0x0 0xc8820000 0x0 0x10000>, + <0x0 0xc110a580 0x0 0xe4>; + reg-names = "dos", "esparser"; + + interrupts = , + ; + interrupt-names = "vdec", "esparser"; + + amlogic,ao-sysctrl = <&sysctrl_AO>; + amlogic,canvas = <&canvas>; + }; + + periphs: bus@c8834000 { compatible = "simple-bus"; reg = <0x0 0xc8834000 0x0 0x2000>; #address-cells = <2>; @@ -449,7 +492,7 @@ }; mailbox: mailbox@404 { - compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu"; + compatible = "amlogic,meson-gxbb-mhu"; reg = <0 0x404 0 0x4c>; interrupts = , , @@ -459,11 +502,15 @@ }; ethmac: ethernet@c9410000 { - compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac"; - reg = <0x0 0xc9410000 0x0 0x10000 - 0x0 0xc8834540 0x0 0x4>; - interrupts = ; + compatible = "amlogic,meson-gxbb-dwmac", + "snps,dwmac-3.70a", + "snps,dwmac"; + reg = <0x0 0xc9410000 0x0 0x10000>, + <0x0 0xc8834540 0x0 0x4>; + interrupts = ; interrupt-names = "macirq"; + rx-fifo-depth = <4096>; + tx-fifo-depth = <2048>; status = "disabled"; }; @@ -499,12 +546,12 @@ vpu: vpu@d0100000 { compatible = "amlogic,meson-gx-vpu"; reg = <0x0 0xd0100000 0x0 0x100000>, - <0x0 0xc883c000 0x0 0x1000>, - <0x0 0xc8838000 0x0 0x1000>; - reg-names = "vpu", "hhi", "dmc"; + <0x0 0xc883c000 0x0 0x1000>; + reg-names = "vpu", "hhi"; interrupts = ; #address-cells = <1>; #size-cells = <0>; + amlogic,canvas = <&canvas>; /* CVBS VDAC output port */ cvbs_vdac_port: port@0 { diff --git a/arch/arm/dts/meson-gxbb-nanopi-k2.dts b/arch/arm/dts/meson-gxbb-nanopi-k2.dts index cbe99bd4e0..d6ca684e0e 100644 --- a/arch/arm/dts/meson-gxbb-nanopi-k2.dts +++ b/arch/arm/dts/meson-gxbb-nanopi-k2.dts @@ -10,6 +10,7 @@ / { compatible = "friendlyarm,nanopi-k2", "amlogic,meson-gxbb"; + model = "FriendlyARM NanoPi K2"; aliases { serial0 = &uart_AO; @@ -154,10 +155,6 @@ amlogic,tx-delay-ns = <2>; - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; @@ -166,6 +163,11 @@ eth_phy0: ethernet-phy@0 { /* Realtek RTL8211F (0x001cc916) */ reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_15 */ interrupts = <29 IRQ_TYPE_LEVEL_LOW>; @@ -191,7 +193,7 @@ pinctrl-names = "default"; }; -&pinctrl_aobus { +&gpio_ao { gpio-line-names = "UART TX", "UART RX", "Power Control", "Power Key In", "VCCK En", "CON1 Header Pin31", "I2S Header Pin6", "IR In", "I2S Header Pin7", @@ -201,7 +203,7 @@ ""; }; -&pinctrl_periphs { +&gpio { gpio-line-names = /* Bank GPIOZ */ "Eth MDIO", "Eth MDC", "Eth RGMII RX Clk", "Eth RX DV", "Eth RX D0", "Eth RX D1", "Eth RX D2", @@ -273,11 +275,14 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <200000000>; + max-frequency = <50000000>; non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddio_ao3v3>; @@ -301,12 +306,11 @@ sd-uhs-sdr12; sd-uhs-sdr25; sd-uhs-sdr50; - sd-uhs-sdr104; - max-frequency = <200000000>; + sd-uhs-ddr50; + max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vddio_ao3v3>; vqmmc-supply = <&vddio_tf>; diff --git a/arch/arm/dts/meson-gxbb-odroidc2.dts b/arch/arm/dts/meson-gxbb-odroidc2.dts index 54954b314a..6ded279c40 100644 --- a/arch/arm/dts/meson-gxbb-odroidc2.dts +++ b/arch/arm/dts/meson-gxbb-odroidc2.dts @@ -36,8 +36,15 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; + /* + * signal name from schematics: PWREN + */ gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>; enable-active-high; + /* + * signal name from schematics: USB_POWER + */ + vin-supply = <&p5v0>; }; leds { @@ -50,18 +57,38 @@ }; }; + p5v0: regulator-p5v0 { + compatible = "regulator-fixed"; + + regulator-name = "P5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + hdmi_p5v0: regulator-hdmi_p5v0 { + compatible = "regulator-fixed"; + regulator-name = "HDMI_P5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + /* AP2331SA-7 */ + vin-supply = <&p5v0>; + }; + tflash_vdd: regulator-tflash_vdd { - /* - * signal name from schematics: TFLASH_VDD_EN - */ compatible = "regulator-fixed"; regulator-name = "TFLASH_VDD"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + /* + * signal name from schematics: TFLASH_VDD_EN + */ gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>; enable-active-high; + /* U16 RT9179GB */ + vin-supply = <&vddio_ao3v3>; }; tf_io: gpio-regulator-tf_io { @@ -77,8 +104,10 @@ gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; gpios-states = <0>; - states = <3300000 0 - 1800000 1>; + states = <3300000 0>, + <1800000 1>; + /* U12/U13 RT9179GB */ + vin-supply = <&vddio_ao3v3>; }; vcc1v8: regulator-vcc1v8 { @@ -86,6 +115,9 @@ regulator-name = "VCC1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; + /* U18 RT9179GB */ + vin-supply = <&vddio_ao3v3>; }; vcc3v3: regulator-vcc3v3 { @@ -95,6 +127,36 @@ regulator-max-microvolt = <3300000>; }; + vddio_ao1v8: regulator-vddio-ao1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + /* U17 RT9179GB */ + vin-supply = <&p5v0>; + }; + + vddio_ao3v3: regulator-vddio-ao3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + /* U11 MP2161GJ-C499 */ + vin-supply = <&p5v0>; + }; + + ddr3_1v5: regulator-ddr3_1v5 { + compatible = "regulator-fixed"; + regulator-name = "DDR3_1V5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + /* U15 MP2161GJ-C499 */ + vin-supply = <&p5v0>; + }; + emmc_pwrseq: emmc-pwrseq { compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; @@ -126,10 +188,6 @@ phy-handle = <ð_phy0>; phy-mode = "rgmii"; - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - amlogic,tx-delay-ns = <2>; mdio { @@ -140,10 +198,14 @@ eth_phy0: ethernet-phy@0 { /* Realtek RTL8211F (0x001cc916) */ reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_15 */ interrupts = <29 IRQ_TYPE_LEVEL_LOW>; - eee-broken-1000t; }; }; }; @@ -167,6 +229,7 @@ status = "okay"; pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; pinctrl-names = "default"; + hdmi-supply = <&hdmi_p5v0>; }; &hdmi_tx_tmds_port { @@ -187,7 +250,7 @@ pinctrl-names = "default"; }; -&pinctrl_aobus { +&gpio_ao { gpio-line-names = "UART TX", "UART RX", "VCCK En", "TF 3V3/1V8 En", "USB HUB nRESET", "USB OTG Power En", "J7 Header Pin2", "IR In", "J7 Header Pin4", @@ -197,7 +260,7 @@ ""; }; -&pinctrl_periphs { +&gpio { gpio-line-names = /* Bank GPIOZ */ "Eth MDIO", "Eth MDC", "Eth RGMII RX Clk", "Eth RX DV", "Eth RX D0", "Eth RX D1", "Eth RX D2", @@ -256,11 +319,14 @@ bus-width = <4>; cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-ddr50; max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&tflash_vdd>; vqmmc-supply = <&tf_io>; @@ -274,7 +340,7 @@ pinctrl-names = "default", "clk-gate"; bus-width = <8>; - max-frequency = <100000000>; + max-frequency = <200000000>; non-removable; disable-wp; cap-mmc-highspeed; @@ -293,7 +359,7 @@ }; &usb0_phy { - status = "okay"; + status = "disabled"; phy-supply = <&usb_otg_pwr>; }; @@ -303,7 +369,7 @@ }; &usb0 { - status = "okay"; + status = "disabled"; }; &usb1 { diff --git a/arch/arm/dts/meson-gxbb-p200.dts b/arch/arm/dts/meson-gxbb-p200.dts index 9d2406a7c4..3c93d1898b 100644 --- a/arch/arm/dts/meson-gxbb-p200.dts +++ b/arch/arm/dts/meson-gxbb-p200.dts @@ -68,10 +68,6 @@ amlogic,tx-delay-ns = <2>; - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; @@ -80,6 +76,11 @@ eth_phy0: ethernet-phy@3 { /* Micrel KSZ9031 (0x00221620) */ reg = <3>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_15 */ interrupts = <29 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm/dts/meson-gxbb-p201.dts b/arch/arm/dts/meson-gxbb-p201.dts index 56e0dd1ff5..150a82f3b2 100644 --- a/arch/arm/dts/meson-gxbb-p201.dts +++ b/arch/arm/dts/meson-gxbb-p201.dts @@ -21,6 +21,6 @@ phy-mode = "rmii"; snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; + snps,reset-delays-us = <0>, <10000>, <1000000>; snps,reset-active-low; }; diff --git a/arch/arm/dts/meson-gxbb-p20x.dtsi b/arch/arm/dts/meson-gxbb-p20x.dtsi index 0be0f2a5d2..e803a466fe 100644 --- a/arch/arm/dts/meson-gxbb-p20x.dtsi +++ b/arch/arm/dts/meson-gxbb-p20x.dtsi @@ -46,8 +46,8 @@ gpios-states = <1>; /* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */ - states = <1800000 0 - 3300000 1>; + states = <1800000 0>, + <3300000 1>; regulator-settling-time-up-us = <10000>; regulator-settling-time-down-us = <150000>; @@ -165,11 +165,14 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; diff --git a/arch/arm/dts/meson-gxbb.dtsi b/arch/arm/dts/meson-gxbb.dtsi index 1ade7e4868..0cb40326b0 100644 --- a/arch/arm/dts/meson-gxbb.dtsi +++ b/arch/arm/dts/meson-gxbb.dtsi @@ -81,6 +81,7 @@ mux { groups = "uart_tx_ao_a", "uart_rx_ao_a"; function = "uart_ao"; + bias-disable; }; }; @@ -89,6 +90,7 @@ groups = "uart_cts_ao_a", "uart_rts_ao_a"; function = "uart_ao"; + bias-disable; }; }; @@ -96,6 +98,7 @@ mux { groups = "uart_tx_ao_b", "uart_rx_ao_b"; function = "uart_ao_b"; + bias-disable; }; }; @@ -104,6 +107,7 @@ groups = "uart_cts_ao_b", "uart_rts_ao_b"; function = "uart_ao_b"; + bias-disable; }; }; @@ -111,6 +115,7 @@ mux { groups = "remote_input_ao"; function = "remote_input_ao"; + bias-disable; }; }; @@ -119,6 +124,7 @@ groups = "i2c_sck_ao", "i2c_sda_ao"; function = "i2c_ao"; + bias-disable; }; }; @@ -126,6 +132,7 @@ mux { groups = "pwm_ao_a_3"; function = "pwm_ao_a_3"; + bias-disable; }; }; @@ -133,6 +140,7 @@ mux { groups = "pwm_ao_a_6"; function = "pwm_ao_a_6"; + bias-disable; }; }; @@ -140,6 +148,7 @@ mux { groups = "pwm_ao_a_12"; function = "pwm_ao_a_12"; + bias-disable; }; }; @@ -147,6 +156,7 @@ mux { groups = "pwm_ao_b"; function = "pwm_ao_b"; + bias-disable; }; }; @@ -154,6 +164,7 @@ mux { groups = "i2s_am_clk"; function = "i2s_out_ao"; + bias-disable; }; }; @@ -161,6 +172,7 @@ mux { groups = "i2s_out_ao_clk"; function = "i2s_out_ao"; + bias-disable; }; }; @@ -168,6 +180,7 @@ mux { groups = "i2s_out_lr_clk"; function = "i2s_out_ao"; + bias-disable; }; }; @@ -175,6 +188,7 @@ mux { groups = "i2s_out_ch01_ao"; function = "i2s_out_ao"; + bias-disable; }; }; @@ -182,6 +196,7 @@ mux { groups = "i2s_out_ch23_ao"; function = "i2s_out_ao"; + bias-disable; }; }; @@ -189,6 +204,7 @@ mux { groups = "i2s_out_ch45_ao"; function = "i2s_out_ao"; + bias-disable; }; }; @@ -203,6 +219,7 @@ mux { groups = "spdif_out_ao_13"; function = "spdif_out_ao"; + bias-disable; }; }; @@ -210,6 +227,7 @@ mux { groups = "ao_cec"; function = "cec_ao"; + bias-disable; }; }; @@ -217,6 +235,7 @@ mux { groups = "ee_cec"; function = "cec_ao"; + bias-disable; }; }; }; @@ -280,6 +299,12 @@ &clkc_AO { compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc"; + clocks = <&xtal>, <&clkc CLKID_CLK81>; + clock-names = "xtal", "mpeg-clk"; +}; + +&efuse { + clocks = <&clkc CLKID_EFUSE>; }; ðmac { @@ -311,6 +336,8 @@ clkc: clock-controller { compatible = "amlogic,gxbb-clkc"; #clock-cells = <1>; + clocks = <&xtal>; + clock-names = "xtal"; }; }; @@ -354,11 +381,17 @@ }; emmc_pins: emmc { - mux { + mux-0 { groups = "emmc_nand_d07", - "emmc_cmd", - "emmc_clk"; + "emmc_cmd"; function = "emmc"; + bias-pull-up; + }; + + mux-1 { + groups = "emmc_clk"; + function = "emmc"; + bias-disable; }; }; @@ -366,6 +399,7 @@ mux { groups = "emmc_ds"; function = "emmc"; + bias-pull-down; }; }; @@ -373,9 +407,6 @@ mux { groups = "BOOT_8"; function = "gpio_periphs"; - }; - cfg-pull-down { - pins = "BOOT_8"; bias-pull-down; }; }; @@ -387,6 +418,7 @@ "nor_c", "nor_cs"; function = "nor"; + bias-disable; }; }; @@ -396,6 +428,7 @@ "spi_mosi", "spi_sclk"; function = "spi"; + bias-disable; }; }; @@ -403,18 +436,25 @@ mux { groups = "spi_ss0"; function = "spi"; + bias-disable; }; }; sdcard_pins: sdcard { - mux { + mux-0 { groups = "sdcard_d0", "sdcard_d1", "sdcard_d2", "sdcard_d3", - "sdcard_cmd", - "sdcard_clk"; + "sdcard_cmd"; + function = "sdcard"; + bias-pull-up; + }; + + mux-1 { + groups = "sdcard_clk"; function = "sdcard"; + bias-disable; }; }; @@ -422,22 +462,25 @@ mux { groups = "CARD_2"; function = "gpio_periphs"; - }; - cfg-pull-down { - pins = "CARD_2"; bias-pull-down; }; }; sdio_pins: sdio { - mux { + mux-0 { groups = "sdio_d0", "sdio_d1", "sdio_d2", "sdio_d3", - "sdio_cmd", - "sdio_clk"; + "sdio_cmd"; + function = "sdio"; + bias-pull-up; + }; + + mux-1 { + groups = "sdio_clk"; function = "sdio"; + bias-disable; }; }; @@ -445,9 +488,6 @@ mux { groups = "GPIOX_4"; function = "gpio_periphs"; - }; - cfg-pull-down { - pins = "GPIOX_4"; bias-pull-down; }; }; @@ -456,6 +496,7 @@ mux { groups = "sdio_irq"; function = "sdio"; + bias-disable; }; }; @@ -464,6 +505,7 @@ groups = "uart_tx_a", "uart_rx_a"; function = "uart_a"; + bias-disable; }; }; @@ -472,6 +514,7 @@ groups = "uart_cts_a", "uart_rts_a"; function = "uart_a"; + bias-disable; }; }; @@ -480,6 +523,7 @@ groups = "uart_tx_b", "uart_rx_b"; function = "uart_b"; + bias-disable; }; }; @@ -488,6 +532,7 @@ groups = "uart_cts_b", "uart_rts_b"; function = "uart_b"; + bias-disable; }; }; @@ -496,6 +541,7 @@ groups = "uart_tx_c", "uart_rx_c"; function = "uart_c"; + bias-disable; }; }; @@ -504,6 +550,7 @@ groups = "uart_cts_c", "uart_rts_c"; function = "uart_c"; + bias-disable; }; }; @@ -512,6 +559,7 @@ groups = "i2c_sck_a", "i2c_sda_a"; function = "i2c_a"; + bias-disable; }; }; @@ -520,6 +568,7 @@ groups = "i2c_sck_b", "i2c_sda_b"; function = "i2c_b"; + bias-disable; }; }; @@ -528,6 +577,7 @@ groups = "i2c_sck_c", "i2c_sda_c"; function = "i2c_c"; + bias-disable; }; }; @@ -548,6 +598,7 @@ "eth_txd2", "eth_txd3"; function = "eth"; + bias-disable; }; }; @@ -563,6 +614,7 @@ "eth_txd0", "eth_txd1"; function = "eth"; + bias-disable; }; }; @@ -570,6 +622,7 @@ mux { groups = "pwm_a_x"; function = "pwm_a_x"; + bias-disable; }; }; @@ -577,6 +630,7 @@ mux { groups = "pwm_a_y"; function = "pwm_a_y"; + bias-disable; }; }; @@ -584,6 +638,7 @@ mux { groups = "pwm_b"; function = "pwm_b"; + bias-disable; }; }; @@ -591,6 +646,7 @@ mux { groups = "pwm_d"; function = "pwm_d"; + bias-disable; }; }; @@ -598,6 +654,7 @@ mux { groups = "pwm_e"; function = "pwm_e"; + bias-disable; }; }; @@ -605,6 +662,7 @@ mux { groups = "pwm_f_x"; function = "pwm_f_x"; + bias-disable; }; }; @@ -612,6 +670,7 @@ mux { groups = "pwm_f_y"; function = "pwm_f_y"; + bias-disable; }; }; @@ -619,6 +678,7 @@ mux { groups = "hdmi_hpd"; function = "hdmi_hpd"; + bias-disable; }; }; @@ -626,6 +686,7 @@ mux { groups = "hdmi_sda", "hdmi_scl"; function = "hdmi_i2c"; + bias-disable; }; }; @@ -633,6 +694,7 @@ mux { groups = "i2sout_ch23_y"; function = "i2s_out"; + bias-disable; }; }; @@ -640,6 +702,7 @@ mux { groups = "i2sout_ch45_y"; function = "i2s_out"; + bias-disable; }; }; @@ -647,6 +710,7 @@ mux { groups = "i2sout_ch67_y"; function = "i2s_out"; + bias-disable; }; }; @@ -654,6 +718,7 @@ mux { groups = "spdif_out_y"; function = "spdif_out"; + bias-disable; }; }; }; @@ -734,6 +799,12 @@ resets = <&reset RESET_SD_EMMC_C>; }; +&simplefb_hdmi { + clocks = <&clkc CLKID_HDMI_PCLK>, + <&clkc CLKID_CLK81>, + <&clkc CLKID_GCLK_VENCI_INT0>; +}; + &spicc { clocks = <&clkc CLKID_SPICC>; clock-names = "core"; @@ -774,3 +845,14 @@ compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu"; power-domains = <&pwrc_vpu>; }; + +&vdec { + compatible = "amlogic,gxbb-vdec", "amlogic,gx-vdec"; + clocks = <&clkc CLKID_DOS_PARSER>, + <&clkc CLKID_DOS>, + <&clkc CLKID_VDEC_1>, + <&clkc CLKID_VDEC_HEVC>; + clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc"; + resets = <&reset RESET_PARSER>; + reset-names = "esparser"; +}; diff --git a/arch/arm/dts/meson-gxl-s805x-libretech-ac.dts b/arch/arm/dts/meson-gxl-s805x-libretech-ac.dts index 82b1c48511..4d59494965 100644 --- a/arch/arm/dts/meson-gxl-s805x-libretech-ac.dts +++ b/arch/arm/dts/meson-gxl-s805x-libretech-ac.dts @@ -14,7 +14,7 @@ / { compatible = "libretech,aml-s805x-ac", "amlogic,s805x", "amlogic,meson-gxl"; - model = "Libre Computer Board AML-S805X-AC"; + model = "Libre Computer AML-S805X-AC"; aliases { serial0 = &uart_AO; diff --git a/arch/arm/dts/meson-gxl-s905x-khadas-vim.dts b/arch/arm/dts/meson-gxl-s905x-khadas-vim.dts index ceb34afe42..440bc23c73 100644 --- a/arch/arm/dts/meson-gxl-s905x-khadas-vim.dts +++ b/arch/arm/dts/meson-gxl-s905x-khadas-vim.dts @@ -33,11 +33,9 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>; - button@0 { + power-button { label = "power"; linux,code = ; gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; @@ -110,10 +108,10 @@ }; &ir { - linux,rc-map-name = "rc-geekbox"; + linux,rc-map-name = "rc-khadas"; }; -&pinctrl_aobus { +&gpio_ao { gpio-line-names = "UART TX", "UART RX", "Power Key In", @@ -128,7 +126,7 @@ ""; }; -&pinctrl_periphs { +&gpio { gpio-line-names = /* Bank GPIOZ */ "", "", "", "", "", "", "", "", "", "", "", "", "", "", @@ -188,6 +186,16 @@ }; }; +&uart_A { + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + }; +}; + /* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */ &uart_AO { status = "okay"; diff --git a/arch/arm/dts/meson-gxl-s905x-libretech-cc.dts b/arch/arm/dts/meson-gxl-s905x-libretech-cc.dts index a23252efc6..e8348b2728 100644 --- a/arch/arm/dts/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm/dts/meson-gxl-s905x-libretech-cc.dts @@ -12,8 +12,9 @@ #include "meson-gxl-s905x.dtsi" / { - compatible = "libretech,cc", "amlogic,s905x", "amlogic,meson-gxl"; - model = "Libre Computer Board AML-S905X-CC"; + compatible = "libretech,aml-s905x-cc", "amlogic,s905x", + "amlogic,meson-gxl"; + model = "Libre Computer AML-S905X-CC"; aliases { serial0 = &uart_AO; @@ -115,11 +116,13 @@ regulator-max-microvolt = <1800000>; }; + /* This is provided by LDOs on the eMMC daugther card */ vddio_boot: regulator-vddio_boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; }; }; @@ -164,7 +167,7 @@ }; }; -&pinctrl_aobus { +&gpio_ao { gpio-line-names = "UART TX", "UART RX", "Blue LED", @@ -179,7 +182,7 @@ "7J1 Header Pin15"; }; -&pinctrl_periphs { +&gpio { gpio-line-names = /* Bank GPIOZ */ "", "", "", "", "", "", "", "", "", "", "", "", "", "", @@ -235,11 +238,10 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vcc_3v3>; vqmmc-supply = <&vcc_card>; @@ -254,9 +256,9 @@ bus-width = <8>; cap-mmc-highspeed; - mmc-ddr-3_3v; - max-frequency = <50000000>; - non-removable; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; disable-wp; mmc-pwrseq = <&emmc_pwrseq>; diff --git a/arch/arm/dts/meson-gxl-s905x-p212.dtsi b/arch/arm/dts/meson-gxl-s905x-p212.dtsi index a1b31013ab..43eb7d149e 100644 --- a/arch/arm/dts/meson-gxl-s905x-p212.dtsi +++ b/arch/arm/dts/meson-gxl-s905x-p212.dtsi @@ -114,11 +114,14 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; @@ -134,11 +137,10 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_boot>; diff --git a/arch/arm/dts/meson-gxl.dtsi b/arch/arm/dts/meson-gxl.dtsi index d5c3d78aaf..259d863993 100644 --- a/arch/arm/dts/meson-gxl.dtsi +++ b/arch/arm/dts/meson-gxl.dtsi @@ -36,6 +36,16 @@ phys = <&usb3_phy>, <&usb2_phy0>, <&usb2_phy1>; }; }; + + crypto: crypto@c883e000 { + compatible = "amlogic,gxl-crypto"; + reg = <0x0 0xc883e000 0x0 0x36>; + interrupts = , + ; + clocks = <&clkc CLKID_BLKMV>; + clock-names = "blkmv"; + status = "okay"; + }; }; }; @@ -80,9 +90,6 @@ }; ðmac { - reg = <0x0 0xc9410000 0x0 0x10000 - 0x0 0xc8834540 0x0 0x4>; - clocks = <&clkc CLKID_ETH>, <&clkc CLKID_FCLK_DIV2>, <&clkc CLKID_MPLL2>; @@ -326,10 +333,15 @@ }; emmc_pins: emmc { - mux { + mux-0 { groups = "emmc_nand_d07", - "emmc_cmd", - "emmc_clk"; + "emmc_cmd"; + function = "emmc"; + bias-pull-up; + }; + + mux-1 { + groups = "emmc_clk"; function = "emmc"; bias-disable; }; @@ -339,7 +351,7 @@ mux { groups = "emmc_ds"; function = "emmc"; - bias-disable; + bias-pull-down; }; }; @@ -381,13 +393,18 @@ }; sdcard_pins: sdcard { - mux { + mux-0 { groups = "sdcard_d0", "sdcard_d1", "sdcard_d2", "sdcard_d3", - "sdcard_cmd", - "sdcard_clk"; + "sdcard_cmd"; + function = "sdcard"; + bias-pull-up; + }; + + mux-1 { + groups = "sdcard_clk"; function = "sdcard"; bias-disable; }; @@ -402,13 +419,18 @@ }; sdio_pins: sdio { - mux { + mux-0 { groups = "sdio_d0", "sdio_d1", "sdio_d2", "sdio_d3", - "sdio_cmd", - "sdio_clk"; + "sdio_cmd"; + function = "sdio"; + bias-pull-up; + }; + + mux-1 { + groups = "sdio_clk"; function = "sdio"; bias-disable; }; @@ -511,6 +533,15 @@ }; }; + i2c_c_dv18_pins: i2c_c_dv18 { + mux { + groups = "i2c_sck_c_dv19", + "i2c_sda_c_dv18"; + function = "i2c_c"; + bias-disable; + }; + }; + eth_pins: eth_c { mux { groups = "eth_mdio", @@ -697,7 +728,7 @@ #size-cells = <0>; internal_phy: ethernet-phy@8 { - compatible = "ethernet-phy-id0181.4400", "ethernet-phy-ieee802.3-c22"; + compatible = "ethernet-phy-id0181.4400"; interrupts = ; reg = <8>; max-speed = <100>; @@ -787,6 +818,12 @@ resets = <&reset RESET_SD_EMMC_C>; }; +&simplefb_hdmi { + clocks = <&clkc CLKID_HDMI_PCLK>, + <&clkc CLKID_CLK81>, + <&clkc CLKID_GCLK_VENCI_INT0>; +}; + &spicc { clocks = <&clkc CLKID_SPICC>; clock-names = "core"; @@ -827,3 +864,14 @@ compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu"; power-domains = <&pwrc_vpu>; }; + +&vdec { + compatible = "amlogic,gxl-vdec", "amlogic,gx-vdec"; + clocks = <&clkc CLKID_DOS_PARSER>, + <&clkc CLKID_DOS>, + <&clkc CLKID_VDEC_1>, + <&clkc CLKID_VDEC_HEVC>; + clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc"; + resets = <&reset RESET_PARSER>; + reset-names = "esparser"; +}; diff --git a/arch/arm/dts/meson-gxm-khadas-vim2.dts b/arch/arm/dts/meson-gxm-khadas-vim2.dts index 782e9edac8..f82f25c1a5 100644 --- a/arch/arm/dts/meson-gxm-khadas-vim2.dts +++ b/arch/arm/dts/meson-gxm-khadas-vim2.dts @@ -18,7 +18,6 @@ aliases { serial0 = &uart_AO; - serial1 = &uart_A; serial2 = &uart_AO_B; }; @@ -63,11 +62,9 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>; - button@0 { + power-button { label = "power"; linux,code = ; gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; @@ -132,19 +129,15 @@ map1 { trip = <&cpu_alert1>; - cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>; - }; - - map2 { - trip = <&cpu_alert1>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - - map3 { - trip = <&cpu_alert1>; - cooling-device = - <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>, + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; @@ -246,11 +239,6 @@ amlogic,tx-delay-ns = <2>; - /* External PHY reset is shared with internal PHY Led signals */ - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - /* External PHY is in RGMII */ phy-mode = "rgmii"; @@ -261,6 +249,11 @@ external_phy: ethernet-phy@0 { /* Realtek RTL8211F (0x001cc916) */ reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_15 */ interrupts = <25 IRQ_TYPE_LEVEL_LOW>; @@ -306,7 +299,7 @@ status = "okay"; pinctrl-0 = <&remote_input_ao_pins>; pinctrl-names = "default"; - linux,rc-map-name = "rc-geekbox"; + linux,rc-map-name = "rc-khadas"; }; &pwm_AO_ab { @@ -328,16 +321,20 @@ &sd_emmc_a { status = "okay"; pinctrl-0 = <&sdio_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; #address-cells = <1>; #size-cells = <0>; bus-width = <4>; - max-frequency = <100000000>; + max-frequency = <50000000>; non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; @@ -353,15 +350,15 @@ &sd_emmc_b { status = "okay"; pinctrl-0 = <&sdcard_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_boot>; @@ -371,17 +368,16 @@ &sd_emmc_c { status = "okay"; pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <8>; - cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <200000000>; non-removable; disable-wp; mmc-ddr-1_8v; mmc-hs200-1_8v; - mmc-hs400-1_8v; mmc-pwrseq = <&emmc_pwrseq>; vmmc-supply = <&vcc_3v3>; @@ -409,8 +405,17 @@ /* This one is connected to the Bluetooth module */ &uart_A { status = "okay"; - pinctrl-0 = <&uart_a_pins>; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + }; }; /* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */ diff --git a/arch/arm/dts/meson-gxm.dtsi b/arch/arm/dts/meson-gxm.dtsi index 247888d68a..5ff64a0d2d 100644 --- a/arch/arm/dts/meson-gxm.dtsi +++ b/arch/arm/dts/meson-gxm.dtsi @@ -44,7 +44,7 @@ cpu4: cpu@100 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x100>; enable-method = "psci"; next-level-cache = <&l2>; @@ -53,7 +53,7 @@ cpu5: cpu@101 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x101>; enable-method = "psci"; next-level-cache = <&l2>; @@ -62,7 +62,7 @@ cpu6: cpu@102 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x102>; enable-method = "psci"; next-level-cache = <&l2>; @@ -71,7 +71,7 @@ cpu7: cpu@103 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x103>; enable-method = "psci"; next-level-cache = <&l2>; @@ -91,6 +91,33 @@ reset-names = "phy"; status = "okay"; }; + + mali: gpu@c0000 { + compatible = "amlogic,meson-gxm-mali", "arm,mali-t820"; + reg = <0x0 0xc0000 0x0 0x40000>; + interrupt-parent = <&gic>; + interrupts = , + , + ; + interrupt-names = "job", "mmu", "gpu"; + clocks = <&clkc CLKID_MALI>; + resets = <&reset RESET_MALI_CAPB3>, <&reset RESET_MALI>; + + /* + * Mali clocking is provided by two identical clock paths + * MALI_0 and MALI_1 muxed to a single clock by a glitch + * free mux to safely change frequency while running. + */ + assigned-clocks = <&clkc CLKID_MALI_0_SEL>, + <&clkc CLKID_MALI_0>, + <&clkc CLKID_MALI>; /* Glitch free mux */ + assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>, + <0>, /* Do Nothing */ + <&clkc CLKID_MALI_0>; + assigned-clock-rates = <0>, /* Do Nothing */ + <666666666>, + <0>; /* Do Nothing */ + }; }; &clkc_AO { @@ -117,3 +144,7 @@ &dwc3 { phys = <&usb3_phy>, <&usb2_phy0>, <&usb2_phy1>, <&usb2_phy2>; }; + +&vdec { + compatible = "amlogic,gxm-vdec", "amlogic,gx-vdec"; +}; diff --git a/arch/arm/dts/meson-khadas-vim3.dtsi b/arch/arm/dts/meson-khadas-vim3.dtsi index 8647da7d66..90815fa25e 100644 --- a/arch/arm/dts/meson-khadas-vim3.dtsi +++ b/arch/arm/dts/meson-khadas-vim3.dtsi @@ -246,6 +246,10 @@ linux,rc-map-name = "rc-khadas"; }; +&pcie { + reset-gpios = <&gpio GPIOA_8 GPIO_ACTIVE_LOW>; +}; + &pwm_ef { status = "okay"; pinctrl-0 = <&pwm_e_pins>; @@ -274,6 +278,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vsys_3v3>; diff --git a/arch/arm/dts/meson-sm1-sei610.dts b/arch/arm/dts/meson-sm1-sei610.dts index 3435aaa4e8..a8bb3fa9fe 100644 --- a/arch/arm/dts/meson-sm1-sei610.dts +++ b/arch/arm/dts/meson-sm1-sei610.dts @@ -9,6 +9,7 @@ #include #include #include +#include / { compatible = "seirobotics,sei610", "amlogic,sm1"; @@ -19,6 +20,22 @@ ethernet0 = ðmac; }; + mono_dac: audio-codec-0 { + compatible = "maxim,max98357a"; + #sound-dai-cells = <0>; + sound-name-prefix = "U16"; + sdmode-gpios = <&gpio GPIOX_8 GPIO_ACTIVE_HIGH>; + }; + + dmics: audio-codec-1 { + #sound-dai-cells = <0>; + compatible = "dmic-codec"; + num-channels = <2>; + wakeup-delay-ms = <50>; + status = "okay"; + sound-name-prefix = "MIC"; + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -29,25 +46,47 @@ }; gpio-keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; + compatible = "gpio-keys"; key1 { label = "A"; linux,code = ; gpios = <&gpio GPIOH_6 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; + interrupts = <34 IRQ_TYPE_EDGE_BOTH>; }; key2 { label = "B"; linux,code = ; gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; + interrupts = <35 IRQ_TYPE_EDGE_BOTH>; }; key3 { label = "C"; linux,code = ; gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; + interrupts = <2 IRQ_TYPE_EDGE_BOTH>; + }; + + mic_mute { + label = "MicMute"; + linux,code = ; + linux,input-type = ; + gpios = <&gpio_ao GPIOE_2 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; + interrupts = <99 IRQ_TYPE_EDGE_BOTH>; + }; + + power_key { + label = "PowerKey"; + linux,code = ; + gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; + interrupts = <3 IRQ_TYPE_EDGE_BOTH>; }; }; @@ -179,6 +218,120 @@ clock-names = "ext_clock"; }; + sound { + compatible = "amlogic,axg-sound-card"; + model = "SM1-SEI610"; + audio-aux-devs = <&tdmout_a>, <&tdmout_b>, + <&tdmin_a>, <&tdmin_b>; + audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", + "TDMOUT_A IN 1", "FRDDR_B OUT 0", + "TDMOUT_A IN 2", "FRDDR_C OUT 0", + "TDM_A Playback", "TDMOUT_A OUT", + "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT", + "TODDR_A IN 4", "PDM Capture", + "TODDR_B IN 4", "PDM Capture", + "TODDR_C IN 4", "PDM Capture", + "TDMIN_A IN 0", "TDM_A Capture", + "TDMIN_A IN 3", "TDM_A Loopback", + "TDMIN_B IN 0", "TDM_A Capture", + "TDMIN_B IN 3", "TDM_A Loopback", + "TDMIN_A IN 1", "TDM_B Capture", + "TDMIN_A IN 4", "TDM_B Loopback", + "TDMIN_B IN 1", "TDM_B Capture", + "TDMIN_B IN 4", "TDM_B Loopback", + "TODDR_A IN 0", "TDMIN_A OUT", + "TODDR_B IN 0", "TDMIN_A OUT", + "TODDR_C IN 0", "TDMIN_A OUT", + "TODDR_A IN 1", "TDMIN_B OUT", + "TODDR_B IN 1", "TDMIN_B OUT", + "TODDR_C IN 1", "TDMIN_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + dai-link-3 { + sound-dai = <&toddr_a>; + }; + + dai-link-4 { + sound-dai = <&toddr_b>; + }; + + dai-link-5 { + sound-dai = <&toddr_c>; + }; + + /* internal speaker interface */ + dai-link-6 { + sound-dai = <&tdmif_a>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&mono_dac>; + }; + + codec-1 { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>; + }; + }; + + /* 8ch hdmi interface */ + dai-link-7 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* internal digital mics */ + dai-link-8 { + sound-dai = <&pdm>; + + codec { + sound-dai = <&dmics>; + }; + }; + + /* hdmi glue */ + dai-link-9 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; + wifi32k: wifi32k { compatible = "pwm-clock"; #clock-cells = <0>; @@ -187,6 +340,10 @@ }; }; +&arb { + status = "okay"; +}; + &cec_AO { pinctrl-0 = <&cec_ao_a_h_pins>; pinctrl-names = "default"; @@ -201,6 +358,10 @@ hdmi-phandle = <&hdmi_tx>; }; +&clkc_audio { + status = "okay"; +}; + &cpu0 { cpu-supply = <&vddcpu>; operating-points-v2 = <&cpu_opp_table>; @@ -235,6 +396,18 @@ phy-mode = "rmii"; }; +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + &hdmi_tx { status = "okay"; pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; @@ -259,6 +432,12 @@ pinctrl-names = "default"; }; +&pdm { + pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_dclk_z_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &pwm_AO_ab { status = "okay"; pinctrl-0 = <&pwm_ao_a_pins>; @@ -305,6 +484,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; @@ -353,6 +535,54 @@ vqmmc-supply = <&emmc_1v8>; }; +&tdmif_a { + pinctrl-0 = <&tdm_a_dout0_pins>, <&tdm_a_fs_pins>, <&tdm_a_sclk_pins>; + pinctrl-names = "default"; + status = "okay"; + + assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD0>, + <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD0>; + assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_A_SCLK>, + <&clkc_audio AUD_CLKID_MST_A_LRCLK>; + assigned-clock-rates = <0>, <0>; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmin_a { + status = "okay"; +}; + +&tdmin_b { + status = "okay"; +}; + +&tdmout_a { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&toddr_a { + status = "okay"; +}; + +&toddr_b { + status = "okay"; +}; + +&toddr_c { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + &uart_A { status = "okay"; pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; @@ -361,6 +591,8 @@ bluetooth { compatible = "brcm,bcm43438-bt"; + interrupt-parent = <&gpio_intc>; + interrupts = <95 IRQ_TYPE_LEVEL_HIGH>; shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; max-speed = <2000000>; clocks = <&wifi32k>; diff --git a/arch/arm/dts/meson-sm1.dtsi b/arch/arm/dts/meson-sm1.dtsi index 521573f3a5..d847a3fcbc 100644 --- a/arch/arm/dts/meson-sm1.dtsi +++ b/arch/arm/dts/meson-sm1.dtsi @@ -5,11 +5,47 @@ */ #include "meson-g12-common.dtsi" +#include #include +#include +#include / { compatible = "amlogic,sm1"; + tdmif_a: audio-controller-0 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_A"; + clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, + <&clkc_audio AUD_CLKID_MST_A_SCLK>, + <&clkc_audio AUD_CLKID_MST_A_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + + tdmif_b: audio-controller-1 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_B"; + clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>, + <&clkc_audio AUD_CLKID_MST_B_SCLK>, + <&clkc_audio AUD_CLKID_MST_B_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + + tdmif_c: audio-controller-2 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_C"; + clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>, + <&clkc_audio AUD_CLKID_MST_C_SCLK>, + <&clkc_audio AUD_CLKID_MST_C_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + cpus { #address-cells = <0x2>; #size-cells = <0x0>; @@ -117,6 +153,305 @@ }; }; +&apb { + audio: bus@60000 { + compatible = "simple-bus"; + reg = <0x0 0x60000 0x0 0x1000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x60000 0x0 0x1000>; + + clkc_audio: clock-controller@0 { + status = "disabled"; + compatible = "amlogic,sm1-audio-clkc"; + reg = <0x0 0x0 0x0 0xb4>; + #clock-cells = <1>; + #reset-cells = <1>; + + clocks = <&clkc CLKID_AUDIO>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL3>, + <&clkc CLKID_HIFI_PLL>, + <&clkc CLKID_FCLK_DIV3>, + <&clkc CLKID_FCLK_DIV4>, + <&clkc CLKID_FCLK_DIV5>; + clock-names = "pclk", + "mst_in0", + "mst_in1", + "mst_in2", + "mst_in3", + "mst_in4", + "mst_in5", + "mst_in6", + "mst_in7"; + + resets = <&reset RESET_AUDIO>; + }; + + toddr_a: audio-controller@100 { + compatible = "amlogic,sm1-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x100 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_A"; + interrupts = ; + clocks = <&clkc_audio AUD_CLKID_TODDR_A>; + resets = <&arb AXG_ARB_TODDR_A>, + <&clkc_audio AUD_RESET_TODDR_A>; + reset-names = "arb", "rst"; + amlogic,fifo-depth = <8192>; + status = "disabled"; + }; + + toddr_b: audio-controller@140 { + compatible = "amlogic,sm1-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x140 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_B"; + interrupts = ; + clocks = <&clkc_audio AUD_CLKID_TODDR_B>; + resets = <&arb AXG_ARB_TODDR_B>, + <&clkc_audio AUD_RESET_TODDR_B>; + reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; + status = "disabled"; + }; + + toddr_c: audio-controller@180 { + compatible = "amlogic,sm1-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x180 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_C"; + interrupts = ; + clocks = <&clkc_audio AUD_CLKID_TODDR_C>; + resets = <&arb AXG_ARB_TODDR_C>, + <&clkc_audio AUD_RESET_TODDR_C>; + reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; + status = "disabled"; + }; + + frddr_a: audio-controller@1c0 { + compatible = "amlogic,sm1-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x1c0 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_A"; + interrupts = ; + clocks = <&clkc_audio AUD_CLKID_FRDDR_A>; + resets = <&arb AXG_ARB_FRDDR_A>, + <&clkc_audio AUD_RESET_FRDDR_A>; + reset-names = "arb", "rst"; + amlogic,fifo-depth = <512>; + status = "disabled"; + }; + + frddr_b: audio-controller@200 { + compatible = "amlogic,sm1-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x200 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_B"; + interrupts = ; + clocks = <&clkc_audio AUD_CLKID_FRDDR_B>; + resets = <&arb AXG_ARB_FRDDR_B>, + <&clkc_audio AUD_RESET_FRDDR_B>; + reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; + status = "disabled"; + }; + + frddr_c: audio-controller@240 { + compatible = "amlogic,sm1-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x240 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_C"; + interrupts = ; + clocks = <&clkc_audio AUD_CLKID_FRDDR_C>; + resets = <&arb AXG_ARB_FRDDR_C>, + <&clkc_audio AUD_RESET_FRDDR_C>; + reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; + status = "disabled"; + }; + + arb: reset-controller@280 { + status = "disabled"; + compatible = "amlogic,meson-sm1-audio-arb"; + reg = <0x0 0x280 0x0 0x4>; + #reset-cells = <1>; + clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; + }; + + tdmin_a: audio-controller@300 { + compatible = "amlogic,sm1-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x300 0x0 0x40>; + sound-name-prefix = "TDMIN_A"; + resets = <&clkc_audio AUD_RESET_TDMIN_A>; + clocks = <&clkc_audio AUD_CLKID_TDMIN_A>, + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_b: audio-controller@340 { + compatible = "amlogic,sm1-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x340 0x0 0x40>; + sound-name-prefix = "TDMIN_B"; + resets = <&clkc_audio AUD_RESET_TDMIN_B>; + clocks = <&clkc_audio AUD_CLKID_TDMIN_B>, + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_c: audio-controller@380 { + compatible = "amlogic,sm1-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x380 0x0 0x40>; + sound-name-prefix = "TDMIN_C"; + resets = <&clkc_audio AUD_RESET_TDMIN_C>; + clocks = <&clkc_audio AUD_CLKID_TDMIN_C>, + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_lb: audio-controller@3c0 { + compatible = "amlogic,sm1-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x3c0 0x0 0x40>; + sound-name-prefix = "TDMIN_LB"; + resets = <&clkc_audio AUD_RESET_TDMIN_LB>; + clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>, + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_a: audio-controller@500 { + compatible = "amlogic,sm1-tdmout"; + reg = <0x0 0x500 0x0 0x40>; + sound-name-prefix = "TDMOUT_A"; + resets = <&clkc_audio AUD_RESET_TDMOUT_A>; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_b: audio-controller@540 { + compatible = "amlogic,sm1-tdmout"; + reg = <0x0 0x540 0x0 0x40>; + sound-name-prefix = "TDMOUT_B"; + resets = <&clkc_audio AUD_RESET_TDMOUT_B>; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>, + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_c: audio-controller@580 { + compatible = "amlogic,sm1-tdmout"; + reg = <0x0 0x580 0x0 0x40>; + sound-name-prefix = "TDMOUT_C"; + resets = <&clkc_audio AUD_RESET_TDMOUT_C>; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>, + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tohdmitx: audio-controller@744 { + compatible = "amlogic,sm1-tohdmitx", + "amlogic,g12a-tohdmitx"; + reg = <0x0 0x744 0x0 0x4>; + #sound-dai-cells = <1>; + sound-name-prefix = "TOHDMITX"; + resets = <&clkc_audio AUD_RESET_TOHDMITX>; + status = "disabled"; + }; + + toddr_d: audio-controller@840 { + compatible = "amlogic,sm1-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x840 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_D"; + interrupts = ; + clocks = <&clkc_audio AUD_CLKID_TODDR_D>; + resets = <&arb AXG_ARB_TODDR_D>, + <&clkc_audio AUD_RESET_TODDR_D>; + reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; + status = "disabled"; + }; + + frddr_d: audio-controller@880 { + compatible = "amlogic,sm1-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x880 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_D"; + interrupts = ; + clocks = <&clkc_audio AUD_CLKID_FRDDR_D>; + resets = <&arb AXG_ARB_FRDDR_D>, + <&clkc_audio AUD_RESET_FRDDR_D>; + reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; + status = "disabled"; + }; + }; + + pdm: audio-controller@61000 { + compatible = "amlogic,sm1-pdm", + "amlogic,axg-pdm"; + reg = <0x0 0x61000 0x0 0x34>; + #sound-dai-cells = <0>; + sound-name-prefix = "PDM"; + clocks = <&clkc_audio AUD_CLKID_PDM>, + <&clkc_audio AUD_CLKID_PDM_DCLK>, + <&clkc_audio AUD_CLKID_PDM_SYSCLK>; + clock-names = "pclk", "dclk", "sysclk"; + status = "disabled"; + }; +}; + &cecb_AO { compatible = "amlogic,meson-sm1-ao-cec"; }; @@ -134,10 +469,31 @@ power-domains = <&pwrc PWRC_SM1_ETH_ID>; }; +&gpio_intc { + compatible = "amlogic,meson-sm1-gpio-intc", + "amlogic,meson-gpio-intc"; +}; + +&pcie { + power-domains = <&pwrc PWRC_SM1_PCIE_ID>; +}; + &pwrc { compatible = "amlogic,meson-sm1-pwrc"; }; +&simplefb_cvbs { + power-domains = <&pwrc PWRC_SM1_VPU_ID>; +}; + +&simplefb_hdmi { + power-domains = <&pwrc PWRC_SM1_VPU_ID>; +}; + +&vdec { + compatible = "amlogic,sm1-vdec"; +}; + &vpu { power-domains = <&pwrc PWRC_SM1_VPU_ID>; }; diff --git a/include/dt-bindings/clock/axg-audio-clkc.h b/include/dt-bindings/clock/axg-audio-clkc.h index 75901c6368..f561f5c5ef 100644 --- a/include/dt-bindings/clock/axg-audio-clkc.h +++ b/include/dt-bindings/clock/axg-audio-clkc.h @@ -80,5 +80,15 @@ #define AUD_CLKID_TDM_SCLK_PAD0 160 #define AUD_CLKID_TDM_SCLK_PAD1 161 #define AUD_CLKID_TDM_SCLK_PAD2 162 +#define AUD_CLKID_TOP 163 +#define AUD_CLKID_TORAM 164 +#define AUD_CLKID_EQDRC 165 +#define AUD_CLKID_RESAMPLE_B 166 +#define AUD_CLKID_TOVAD 167 +#define AUD_CLKID_LOCKER 168 +#define AUD_CLKID_SPDIFIN_LB 169 +#define AUD_CLKID_FRDDR_D 170 +#define AUD_CLKID_TODDR_D 171 +#define AUD_CLKID_LOOPBACK_B 172 #endif /* __AXG_AUDIO_CLKC_BINDINGS_H */ diff --git a/include/dt-bindings/clock/gxbb-aoclkc.h b/include/dt-bindings/clock/gxbb-aoclkc.h index 9d15e2221f..ec3b26319f 100644 --- a/include/dt-bindings/clock/gxbb-aoclkc.h +++ b/include/dt-bindings/clock/gxbb-aoclkc.h @@ -63,5 +63,12 @@ #define CLKID_AO_UART2 4 #define CLKID_AO_IR_BLASTER 5 #define CLKID_AO_CEC_32K 6 +#define CLKID_AO_CTS_OSCIN 7 +#define CLKID_AO_32K_PRE 8 +#define CLKID_AO_32K_DIV 9 +#define CLKID_AO_32K_SEL 10 +#define CLKID_AO_32K 11 +#define CLKID_AO_CTS_RTC_OSCIN 12 +#define CLKID_AO_CLK81 13 #endif diff --git a/include/dt-bindings/clock/gxbb-clkc.h b/include/dt-bindings/clock/gxbb-clkc.h index 8ba99a5e3f..db0763e961 100644 --- a/include/dt-bindings/clock/gxbb-clkc.h +++ b/include/dt-bindings/clock/gxbb-clkc.h @@ -125,5 +125,26 @@ #define CLKID_VAPB_1 138 #define CLKID_VAPB_SEL 139 #define CLKID_VAPB 140 +#define CLKID_VDEC_1 153 +#define CLKID_VDEC_HEVC 156 +#define CLKID_GEN_CLK 159 +#define CLKID_VID_PLL 166 +#define CLKID_VCLK 175 +#define CLKID_VCLK2 176 +#define CLKID_VCLK_DIV1 185 +#define CLKID_VCLK_DIV2 186 +#define CLKID_VCLK_DIV4 187 +#define CLKID_VCLK_DIV6 188 +#define CLKID_VCLK_DIV12 189 +#define CLKID_VCLK2_DIV1 190 +#define CLKID_VCLK2_DIV2 191 +#define CLKID_VCLK2_DIV4 192 +#define CLKID_VCLK2_DIV6 193 +#define CLKID_VCLK2_DIV12 194 +#define CLKID_CTS_ENCI 199 +#define CLKID_CTS_ENCP 200 +#define CLKID_CTS_VDAC 201 +#define CLKID_HDMI_TX 202 +#define CLKID_HDMI 205 #endif /* __GXBB_CLKC_H */ diff --git a/include/dt-bindings/gpio/meson-gxbb-gpio.h b/include/dt-bindings/gpio/meson-gxbb-gpio.h index 43a68a1110..489c75b276 100644 --- a/include/dt-bindings/gpio/meson-gxbb-gpio.h +++ b/include/dt-bindings/gpio/meson-gxbb-gpio.h @@ -1,15 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * GPIO definitions for Amlogic Meson GXBB SoCs * * Copyright (C) 2016 Endless Mobile, Inc. * Author: Carlo Caione - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . */ #ifndef _DT_BINDINGS_MESON_GXBB_GPIO_H diff --git a/include/dt-bindings/gpio/meson-gxl-gpio.h b/include/dt-bindings/gpio/meson-gxl-gpio.h index 01f2a2abd3..0a001ae482 100644 --- a/include/dt-bindings/gpio/meson-gxl-gpio.h +++ b/include/dt-bindings/gpio/meson-gxl-gpio.h @@ -1,15 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * GPIO definitions for Amlogic Meson GXL SoCs * * Copyright (C) 2016 Endless Mobile, Inc. * Author: Carlo Caione - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . */ #ifndef _DT_BINDINGS_MESON_GXL_GPIO_H diff --git a/include/dt-bindings/reset/amlogic,meson-axg-audio-arb.h b/include/dt-bindings/reset/amlogic,meson-axg-audio-arb.h index 05c3636787..1ef807856c 100644 --- a/include/dt-bindings/reset/amlogic,meson-axg-audio-arb.h +++ b/include/dt-bindings/reset/amlogic,meson-axg-audio-arb.h @@ -13,5 +13,7 @@ #define AXG_ARB_FRDDR_A 3 #define AXG_ARB_FRDDR_B 4 #define AXG_ARB_FRDDR_C 5 +#define AXG_ARB_TODDR_D 6 +#define AXG_ARB_FRDDR_D 7 #endif /* _DT_BINDINGS_AMLOGIC_MESON_AXG_AUDIO_ARB_H */ diff --git a/include/dt-bindings/reset/amlogic,meson-axg-reset.h b/include/dt-bindings/reset/amlogic,meson-axg-reset.h index ad6f55dabd..0f2e0fe45c 100644 --- a/include/dt-bindings/reset/amlogic,meson-axg-reset.h +++ b/include/dt-bindings/reset/amlogic,meson-axg-reset.h @@ -1,12 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */ /* - * * Copyright (c) 2016 BayLibre, SAS. * Author: Neil Armstrong * * Copyright (c) 2017 Amlogic, inc. * Author: Yixun Lan * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD) */ #ifndef _DT_BINDINGS_AMLOGIC_MESON_AXG_RESET_H diff --git a/include/dt-bindings/reset/amlogic,meson-g12a-audio-reset.h b/include/dt-bindings/reset/amlogic,meson-g12a-audio-reset.h index 14b78dabed..f805129ca7 100644 --- a/include/dt-bindings/reset/amlogic,meson-g12a-audio-reset.h +++ b/include/dt-bindings/reset/amlogic,meson-g12a-audio-reset.h @@ -35,4 +35,19 @@ #define AUD_RESET_TOHDMITX 24 #define AUD_RESET_CLKTREE 25 +/* SM1 added resets */ +#define AUD_RESET_RESAMPLE_B 26 +#define AUD_RESET_TOVAD 27 +#define AUD_RESET_LOCKER 28 +#define AUD_RESET_SPDIFIN_LB 29 +#define AUD_RESET_FRATV 30 +#define AUD_RESET_FRHDMIRX 31 +#define AUD_RESET_FRDDR_D 32 +#define AUD_RESET_TODDR_D 33 +#define AUD_RESET_LOOPBACK_B 34 +#define AUD_RESET_EARCTX 35 +#define AUD_RESET_EARCRX 36 +#define AUD_RESET_FRDDR_E 37 +#define AUD_RESET_TODDR_E 38 + #endif diff --git a/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h b/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h index 524d6077ac..ea50586188 100644 --- a/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h +++ b/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h @@ -1,56 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ /* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * * Copyright (c) 2016 BayLibre, SAS. * Author: Neil Armstrong - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see . - * The full GNU General Public License is included in this distribution - * in the file called COPYING. - * - * BSD LICENSE - * - * Copyright (c) 2016 BayLibre, SAS. - * Author: Neil Armstrong - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef _DT_BINDINGS_AMLOGIC_MESON_GXBB_RESET_H #define _DT_BINDINGS_AMLOGIC_MESON_GXBB_RESET_H -- 2.39.5