From d0847ecc9f969e6ac089e505d5c1ddedddedfcd4 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Fri, 1 May 2020 22:04:50 +0530 Subject: [PATCH] spi: Zap lpc32xx_ssp driver-related code lpc32xx_ssp driver is deprecated, no active updates and no board user, hence dropped the same. Cc: Vladimir Zapolskiy Cc: Albert ARIBAUD Cc: Tom Rini Signed-off-by: Jagan Teki --- drivers/spi/Kconfig | 6 -- drivers/spi/Makefile | 1 - drivers/spi/lpc32xx_ssp.c | 134 ----------------------------------- include/configs/devkit3250.h | 5 -- include/configs/work_92105.h | 5 -- scripts/config_whitelist.txt | 1 - 6 files changed, 152 deletions(-) delete mode 100644 drivers/spi/lpc32xx_ssp.c diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 4166c6104e..dccd5ea0d9 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -431,12 +431,6 @@ config KIRKWOOD_SPI Enable support for SPI on various Marvell SoCs, such as Kirkwood and Armada 375. -config LPC32XX_SSP - bool "LPC32XX SPI Driver" - depends on DEPRECATED - help - Enable support for SPI on LPC32xx - config MXC_SPI bool "MXC SPI Driver" help diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 52462e19a3..6441694c8d 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -33,7 +33,6 @@ obj-$(CONFIG_FSL_ESPI) += fsl_espi.o obj-$(CONFIG_FSL_QSPI) += fsl_qspi.o obj-$(CONFIG_ICH_SPI) += ich.o obj-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o -obj-$(CONFIG_LPC32XX_SSP) += lpc32xx_ssp.o obj-$(CONFIG_MESON_SPIFC) += meson_spifc.o obj-$(CONFIG_MPC8XX_SPI) += mpc8xx_spi.o obj-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o diff --git a/drivers/spi/lpc32xx_ssp.c b/drivers/spi/lpc32xx_ssp.c deleted file mode 100644 index 4b09366317..0000000000 --- a/drivers/spi/lpc32xx_ssp.c +++ /dev/null @@ -1,134 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * LPC32xx SSP interface (SPI mode) - * - * (C) Copyright 2014 DENX Software Engineering GmbH - * Written-by: Albert ARIBAUD - */ - -#include -#include -#include -#include -#include -#include - -/* SSP chip registers */ -struct ssp_regs { - u32 cr0; - u32 cr1; - u32 data; - u32 sr; - u32 cpsr; - u32 imsc; - u32 ris; - u32 mis; - u32 icr; - u32 dmacr; -}; - -/* CR1 register defines */ -#define SSP_CR1_SSP_ENABLE 0x0002 - -/* SR register defines */ -#define SSP_SR_TNF 0x0002 -/* SSP status RX FIFO not empty bit */ -#define SSP_SR_RNE 0x0004 - -/* lpc32xx spi slave */ -struct lpc32xx_spi_slave { - struct spi_slave slave; - struct ssp_regs *regs; -}; - -static inline struct lpc32xx_spi_slave *to_lpc32xx_spi_slave( - struct spi_slave *slave) -{ - return container_of(slave, struct lpc32xx_spi_slave, slave); -} - -/* the following is called in sequence by do_spi_xfer() */ - -struct spi_slave *spi_setup_slave(uint bus, uint cs, uint max_hz, uint mode) -{ - struct lpc32xx_spi_slave *lslave; - - /* we only set up SSP0 for now, so ignore bus */ - - if (mode & SPI_3WIRE) { - pr_err("3-wire mode not supported"); - return NULL; - } - - if (mode & SPI_SLAVE) { - pr_err("slave mode not supported\n"); - return NULL; - } - - if (mode & SPI_PREAMBLE) { - pr_err("preamble byte skipping not supported\n"); - return NULL; - } - - lslave = spi_alloc_slave(struct lpc32xx_spi_slave, bus, cs); - if (!lslave) { - printf("SPI_error: Fail to allocate lpc32xx_spi_slave\n"); - return NULL; - } - - lslave->regs = (struct ssp_regs *)SSP0_BASE; - - /* - * 8 bit frame, SPI fmt, 500kbps -> clock divider is 26. - * Set SCR to 0 and CPSDVSR to 26. - */ - - writel(0x7, &lslave->regs->cr0); /* 8-bit chunks, SPI, 1 clk/bit */ - writel(26, &lslave->regs->cpsr); /* SSP clock = HCLK/26 = 500kbps */ - writel(0, &lslave->regs->imsc); /* do not raise any interrupts */ - writel(0, &lslave->regs->icr); /* clear any pending interrupt */ - writel(0, &lslave->regs->dmacr); /* do not do DMAs */ - writel(SSP_CR1_SSP_ENABLE, &lslave->regs->cr1); /* enable SSP0 */ - return &lslave->slave; -} - -void spi_free_slave(struct spi_slave *slave) -{ - struct lpc32xx_spi_slave *lslave = to_lpc32xx_spi_slave(slave); - - debug("(lpc32xx) spi_free_slave: 0x%08x\n", (u32)lslave); - free(lslave); -} - -int spi_claim_bus(struct spi_slave *slave) -{ - /* only one bus and slave so far, always available */ - return 0; -} - -int spi_xfer(struct spi_slave *slave, unsigned int bitlen, - const void *dout, void *din, unsigned long flags) -{ - struct lpc32xx_spi_slave *lslave = to_lpc32xx_spi_slave(slave); - int bytelen = bitlen >> 3; - int idx_out = 0; - int idx_in = 0; - int start_time; - - start_time = get_timer(0); - while ((idx_out < bytelen) || (idx_in < bytelen)) { - int status = readl(&lslave->regs->sr); - if ((idx_out < bytelen) && (status & SSP_SR_TNF)) - writel(((u8 *)dout)[idx_out++], &lslave->regs->data); - if ((idx_in < bytelen) && (status & SSP_SR_RNE)) - ((u8 *)din)[idx_in++] = readl(&lslave->regs->data); - if (get_timer(start_time) >= CONFIG_LPC32XX_SSP_TIMEOUT) - return -1; - } - return 0; -} - -void spi_release_bus(struct spi_slave *slave) -{ - /* do nothing */ -} diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h index f1f2be0797..4471a12f34 100644 --- a/include/configs/devkit3250.h +++ b/include/configs/devkit3250.h @@ -54,11 +54,6 @@ */ #define CONFIG_LPC32XX_GPIO -/* - * SSP/SPI - */ -#define CONFIG_LPC32XX_SSP_TIMEOUT 100000 - /* * Ethernet */ diff --git a/include/configs/work_92105.h b/include/configs/work_92105.h index 421384d9ba..93c8d64b14 100644 --- a/include/configs/work_92105.h +++ b/include/configs/work_92105.h @@ -104,11 +104,6 @@ #define CONFIG_LPC32XX_GPIO -/* - * SSP/SPI/DISPLAY - */ - -#define CONFIG_LPC32XX_SSP_TIMEOUT 100000 /* * Environment */ diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 741e9545e9..253c46159b 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -1034,7 +1034,6 @@ CONFIG_LPC32XX_NAND_SLC_WDR_CLKS CONFIG_LPC32XX_NAND_SLC_WHOLD CONFIG_LPC32XX_NAND_SLC_WSETUP CONFIG_LPC32XX_NAND_SLC_WWIDTH -CONFIG_LPC32XX_SSP_TIMEOUT CONFIG_LPC_BASE CONFIG_LPC_IO_BASE CONFIG_LPUART -- 2.39.5