From cecf38a75581b0d4c4922b9a4ff94a626604830e Mon Sep 17 00:00:00 2001 From: Joel Johnson Date: Mon, 23 Mar 2020 11:26:32 -0600 Subject: [PATCH] arm: mvebu: clearfog: support multiple SATA boot Enable distro bootcmd support for additional SATA ports if enabled. Signed-off-by: Joel Johnson Reviewed-by: Stefan Roese --- include/configs/clearfog.h | 38 ++++++++++++++++++++++++++++++++++---- 1 file changed, 34 insertions(+), 4 deletions(-) diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h index eef6983202..52945d1703 100644 --- a/include/configs/clearfog.h +++ b/include/configs/clearfog.h @@ -116,17 +116,47 @@ #define BOOT_TARGET_DEVICES_USB(func) #endif -#ifdef CONFIG_SCSI -#define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0) +#ifndef CONFIG_SCSI +#define BOOT_TARGET_DEVICES_SCSI_BUS0(func) +#define BOOT_TARGET_DEVICES_SCSI_BUS1(func) +#define BOOT_TARGET_DEVICES_SCSI_BUS2(func) #else -#define BOOT_TARGET_DEVICES_SCSI(func) +/* + * With SCSI enabled, M.2 SATA is always located on bus 0 + */ +#define BOOT_TARGET_DEVICES_SCSI_BUS0(func) func(SCSI, scsi, 0) + +/* + * Either one or both mPCIe slots may be configured as mSATA interfaces. The + * SCSI bus ids are assigned based on sequence of hardware present, not always + * tied to hardware slot ids. As such, use second SCSI bus if either slot is + * set for SATA, and only use third SCSI bus if both slots are SATA enabled. + */ +#if defined (CONFIG_CLEARFOG_CON2_SATA) || defined (CONFIG_CLEARFOG_CON3_SATA) +#define BOOT_TARGET_DEVICES_SCSI_BUS1(func) func(SCSI, scsi, 1) +#else +#define BOOT_TARGET_DEVICES_SCSI_BUS1(func) +#endif + +#if defined (CONFIG_CLEARFOG_CON2_SATA) && defined (CONFIG_CLEARFOG_CON3_SATA) +#define BOOT_TARGET_DEVICES_SCSI_BUS2(func) func(SCSI, scsi, 2) +#else +#define BOOT_TARGET_DEVICES_SCSI_BUS2(func) #endif +#endif /* CONFIG_SCSI */ + +/* + * The SCSI buses are attempted in increasing bus order, there is no current + * mechanism to alter the default bus priority order for booting. + */ #define BOOT_TARGET_DEVICES(func) \ BOOT_TARGET_DEVICES_MMC(func) \ BOOT_TARGET_DEVICES_SCSI(func) \ BOOT_TARGET_DEVICES_USB(func) \ - BOOT_TARGET_DEVICES_SCSI(func) \ + BOOT_TARGET_DEVICES_SCSI_BUS0(func) \ + BOOT_TARGET_DEVICES_SCSI_BUS1(func) \ + BOOT_TARGET_DEVICES_SCSI_BUS2(func) \ func(PXE, pxe, na) \ func(DHCP, dhcp, na) -- 2.39.5