From c36377d09ed4dcd9f7cbde0c524c4b623a55083d Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Sat, 4 Nov 2023 02:21:47 -0500 Subject: [PATCH] arm: mach-k3: j721e: Improve support for UDA FS Commit 5019170970ad ("arch: arm: mach-k3: j721e: add support for UDA FS") introduced basic UDA FS support, however, we can Take approach similar to commit 0f1c1e8b368b ("arm: mach-k3: am625: Add support for UDA FS"). While boot partition support with EMMC boot is useful, it is constrained by the size of boot hardware partition itself. In the case of K3 devices, tispl images can contain OP-TEE images that can substantially vary in size and the u-boot image itself can vary over time as we enable various features. So use the CSD information in the case of EMMC_BOOT configuration being enabled to pick boot partition or UDA FS mode operation to pick. If EMMC_BOOT is disabled, then depend on filesystem configuration to pick data from UDA. Signed-off-by: Nishanth Menon --- arch/arm/mach-k3/j721e_init.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-k3/j721e_init.c b/arch/arm/mach-k3/j721e_init.c index b4398c8e0b..8738f91ee3 100644 --- a/arch/arm/mach-k3/j721e_init.c +++ b/arch/arm/mach-k3/j721e_init.c @@ -293,7 +293,14 @@ u32 spl_mmc_boot_mode(struct mmc *mmc, const u32 boot_device) { switch (boot_device) { case BOOT_DEVICE_MMC1: - return (spl_mmc_emmc_boot_partition(mmc) ? MMCSD_MODE_EMMCBOOT : MMCSD_MODE_FS); + if (IS_ENABLED(CONFIG_SUPPORT_EMMC_BOOT)) { + if (spl_mmc_emmc_boot_partition(mmc)) + return MMCSD_MODE_EMMCBOOT; + return MMCSD_MODE_FS; + } + if (IS_ENABLED(CONFIG_SPL_FS_FAT) || IS_ENABLED(CONFIG_SPL_FS_EXT4)) + return MMCSD_MODE_FS; + return MMCSD_MODE_EMMCBOOT; case BOOT_DEVICE_MMC2: return MMCSD_MODE_FS; default: -- 2.39.5