From c006675f95656421e6cc2b1bc36ec8a671173a1a Mon Sep 17 00:00:00 2001 From: Aaron Williams Date: Thu, 7 Apr 2022 09:11:13 +0200 Subject: [PATCH] mips: octeon: Add cvmx-helper-board.c Import cvmx-helper-board.c from 2013 U-Boot. It will be used by the later added drivers to support networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams Signed-off-by: Stefan Roese --- arch/mips/mach-octeon/cvmx-helper-board.c | 1824 +++++++++++++++++++++ 1 file changed, 1824 insertions(+) create mode 100644 arch/mips/mach-octeon/cvmx-helper-board.c diff --git a/arch/mips/mach-octeon/cvmx-helper-board.c b/arch/mips/mach-octeon/cvmx-helper-board.c new file mode 100644 index 0000000000..6dcc4e557e --- /dev/null +++ b/arch/mips/mach-octeon/cvmx-helper-board.c @@ -0,0 +1,1824 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018-2022 Marvell International Ltd. + * + * Helper functions to abstract board specific data about + * network ports from the rest of the cvmx-helper files. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +static bool sfp_parsed; + +static int __cvmx_helper_78xx_parse_phy(struct cvmx_phy_info *phy_info, + int ipd_port); +static int __get_phy_info_from_dt(cvmx_phy_info_t *phy_info, int ipd_port); + +/** + * Writes to a Microsemi VSC7224 16-bit register + * + * @param[in] i2c_bus i2c bus data structure (must be enabled) + * @param addr Address of VSC7224 on the i2c bus + * @param reg 8-bit register number to write to + * @param val 16-bit value to write + * + * @return 0 for success + */ +static int cvmx_write_vsc7224_reg(const struct cvmx_fdt_i2c_bus_info *i2c_bus, + u8 addr, u8 reg, u16 val) +{ + struct udevice *dev; + u8 buffer[2]; + int ret; + + ret = i2c_get_chip(i2c_bus->i2c_bus, addr, 1, &dev); + if (ret) { + debug("Cannot find I2C device: %d\n", ret); + return -1; + } + + ret = dm_i2c_write(dev, reg, buffer, 2); + if (ret) { + debug("Cannot write I2C device: %d\n", ret); + return -1; + } + + return 0; +} + +/** + * Writes to a Microsemi VSC7224 16-bit register + * + * @param[in] i2c_bus i2c bus data structure (must be enabled) + * @param addr Address of VSC7224 on the i2c bus + * @param reg 8-bit register number to write to + * + * @return 16-bit value or error if < 0 + */ +static int cvmx_read_vsc7224_reg(const struct cvmx_fdt_i2c_bus_info *i2c_bus, + u8 addr, u8 reg) +{ + struct udevice *dev; + u8 buffer[2]; + int ret; + + ret = i2c_get_chip(i2c_bus->i2c_bus, addr, 1, &dev); + if (ret) { + debug("Cannot find I2C device: %d\n", ret); + return -1; + } + + ret = dm_i2c_read(dev, reg, buffer, 2); + if (ret) { + debug("Cannot read I2C device: %d\n", ret); + return -1; + } + + return (buffer[0] << 8) | buffer[1]; +} + +/** + * Function called whenever mod_abs/mod_prs has changed for Microsemi VSC7224 + * + * @param sfp pointer to SFP data structure + * @param val 1 if absent, 0 if present, otherwise not set + * @param data user-defined data + * + * @return 0 for success, -1 on error + */ +int cvmx_sfp_vsc7224_mod_abs_changed(struct cvmx_fdt_sfp_info *sfp, int val, + void *data) +{ + int err; + struct cvmx_sfp_mod_info *mod_info; + int length; + struct cvmx_vsc7224 *vsc7224; + struct cvmx_vsc7224_chan *vsc7224_chan; + struct cvmx_vsc7224_tap *taps, *match = NULL; + int i; + + debug("%s(%s, %d, %p): Module %s\n", __func__, sfp->name, val, data, + val ? "absent" : "present"); + if (val) + return 0; + + /* We're here if we detect that the module is now present */ + err = cvmx_sfp_read_i2c_eeprom(sfp); + if (err) { + debug("%s: Error reading the SFP module eeprom for %s\n", + __func__, sfp->name); + return err; + } + mod_info = &sfp->sfp_info; + + if (!mod_info->valid || !sfp->valid) { + debug("%s: Module data is invalid\n", __func__); + return -1; + } + + vsc7224_chan = sfp->vsc7224_chan; + while (vsc7224_chan) { + /* We don't do any rx tuning */ + if (!vsc7224_chan->is_tx) { + vsc7224_chan = vsc7224_chan->next; + continue; + } + + /* Walk through all the channels */ + taps = vsc7224_chan->taps; + if (mod_info->limiting) + length = 0; + else + length = mod_info->max_copper_cable_len; + debug("%s: limiting: %d, length: %d\n", __func__, + mod_info->limiting, length); + + /* Find a matching length in the taps table */ + for (i = 0; i < vsc7224_chan->num_taps; i++) { + if (length >= taps->len) + match = taps; + taps++; + } + if (!match) { + debug("%s(%s, %d, %p): Error: no matching tap for length %d\n", + __func__, sfp->name, val, data, length); + return -1; + } + debug("%s(%s): Applying %cx taps to vsc7224 %s:%d for cable length %d+\n", + __func__, sfp->name, vsc7224_chan->is_tx ? 't' : 'r', + vsc7224_chan->vsc7224->name, vsc7224_chan->lane, + match->len); + /* Program the taps */ + vsc7224 = vsc7224_chan->vsc7224; + cvmx_write_vsc7224_reg(vsc7224->i2c_bus, vsc7224->i2c_addr, + 0x7f, vsc7224_chan->lane); + if (!vsc7224_chan->maintap_disable) + cvmx_write_vsc7224_reg(vsc7224->i2c_bus, + vsc7224->i2c_addr, 0x99, + match->main_tap); + if (!vsc7224_chan->pretap_disable) + cvmx_write_vsc7224_reg(vsc7224->i2c_bus, + vsc7224->i2c_addr, 0x9a, + match->pre_tap); + if (!vsc7224_chan->posttap_disable) + cvmx_write_vsc7224_reg(vsc7224->i2c_bus, + vsc7224->i2c_addr, 0x9b, + match->post_tap); + + /* Re-use val and disable taps if needed */ + if (vsc7224_chan->maintap_disable || + vsc7224_chan->pretap_disable || + vsc7224_chan->posttap_disable) { + val = cvmx_read_vsc7224_reg(vsc7224->i2c_bus, + vsc7224->i2c_addr, 0x97); + if (vsc7224_chan->maintap_disable) + val |= 0x800; + if (vsc7224_chan->pretap_disable) + val |= 0x1000; + if (vsc7224_chan->posttap_disable) + val |= 0x400; + cvmx_write_vsc7224_reg(vsc7224->i2c_bus, + vsc7224->i2c_addr, 0x97, val); + } + vsc7224_chan = vsc7224_chan->next; + } + + return err; +} + +/** + * Update the mod_abs and error LED + * + * @param ipd_port ipd port number + * @param link link information + */ +static void __cvmx_helper_update_sfp(int ipd_port, + struct cvmx_fdt_sfp_info *sfp_info, + cvmx_helper_link_info_t link) +{ + debug("%s(%d): checking mod_abs\n", __func__, ipd_port); + + cvmx_sfp_check_mod_abs(sfp_info, sfp_info->mod_abs_data); +} + +static void cvmx_sfp_update_link(struct cvmx_fdt_sfp_info *sfp, + cvmx_helper_link_info_t link) +{ + while (sfp) { + debug("%s(%s): checking mod_abs\n", __func__, sfp->name); + if (link.s.link_up && sfp->last_mod_abs) + cvmx_sfp_check_mod_abs(sfp, sfp->mod_abs_data); + sfp = sfp->next_iface_sfp; + } +} + +/** + * @INTERNAL + * This function is used ethernet ports link speed. This functions uses the + * device tree information to determine the phy address and type of PHY. + * The only supproted PHYs are Marvell and Broadcom. + * + * @param ipd_port IPD input port associated with the port we want to get link + * status for. + * + * @return The ports link status. If the link isn't fully resolved, this must + * return zero. + */ +cvmx_helper_link_info_t __cvmx_helper_board_link_get_from_dt(int ipd_port) +{ + cvmx_helper_link_info_t result; + cvmx_phy_info_t *phy_info = NULL; + cvmx_phy_info_t local_phy_info; + int xiface = 0, index = 0; + bool use_inband = false; + struct cvmx_fdt_sfp_info *sfp_info; + const void *fdt_addr = CASTPTR(const void *, gd->fdt_blob); + + result.u64 = 0; + + if (ipd_port >= 0) { + int mode; + + xiface = cvmx_helper_get_interface_num(ipd_port); + index = cvmx_helper_get_interface_index_num(ipd_port); + mode = cvmx_helper_interface_get_mode(xiface); + if (!cvmx_helper_get_port_autonegotiation(xiface, index)) { + result.s.link_up = 1; + result.s.full_duplex = 1; + switch (mode) { + case CVMX_HELPER_INTERFACE_MODE_RGMII: + case CVMX_HELPER_INTERFACE_MODE_GMII: + case CVMX_HELPER_INTERFACE_MODE_SGMII: + case CVMX_HELPER_INTERFACE_MODE_QSGMII: + case CVMX_HELPER_INTERFACE_MODE_AGL: + case CVMX_HELPER_INTERFACE_MODE_SPI: + if (OCTEON_IS_MODEL(OCTEON_CN70XX)) { + struct cvmx_xiface xi = + cvmx_helper_xiface_to_node_interface( + xiface); + u64 gbaud = cvmx_qlm_get_gbaud_mhz(0); + + result.s.speed = gbaud * 8 / 10; + if (cvmx_qlm_get_dlm_mode( + 0, xi.interface) == + CVMX_QLM_MODE_SGMII) + result.s.speed >>= 1; + else + result.s.speed >>= 2; + } else { + result.s.speed = 1000; + } + break; + case CVMX_HELPER_INTERFACE_MODE_RXAUI: + case CVMX_HELPER_INTERFACE_MODE_XAUI: + case CVMX_HELPER_INTERFACE_MODE_10G_KR: + case CVMX_HELPER_INTERFACE_MODE_XFI: + result.s.speed = 10000; + break; + case CVMX_HELPER_INTERFACE_MODE_XLAUI: + case CVMX_HELPER_INTERFACE_MODE_40G_KR4: + result.s.speed = 40000; + break; + default: + break; + } + + sfp_info = cvmx_helper_cfg_get_sfp_info(xiface, index); + /* Initialize the SFP info if it hasn't already been + * done. + */ + if (!sfp_info && !sfp_parsed) { + cvmx_sfp_parse_device_tree(fdt_addr); + sfp_parsed = true; + cvmx_sfp_read_all_modules(); + sfp_info = cvmx_helper_cfg_get_sfp_info(xiface, + index); + } + /* If the link is down or the link is up but we still + * register the module as being absent, re-check + * mod_abs. + */ + cvmx_sfp_update_link(sfp_info, result); + + cvmx_helper_update_link_led(xiface, index, result); + + return result; + } + phy_info = cvmx_helper_get_port_phy_info(xiface, index); + if (!phy_info) { + debug("%s: phy info not saved in config, allocating for 0x%x:%d\n", + __func__, xiface, index); + + phy_info = (cvmx_phy_info_t *)cvmx_bootmem_alloc( + sizeof(*phy_info), 0); + if (!phy_info) { + debug("%s: Out of memory\n", __func__); + return result; + } + memset(phy_info, 0, sizeof(*phy_info)); + phy_info->phy_addr = -1; + debug("%s: Setting phy info for 0x%x:%d to %p\n", + __func__, xiface, index, phy_info); + cvmx_helper_set_port_phy_info(xiface, index, phy_info); + } + } else { + /* For management ports we don't store the PHY information + * so we use a local copy instead. + */ + phy_info = &local_phy_info; + memset(phy_info, 0, sizeof(*phy_info)); + phy_info->phy_addr = -1; + } + + if (phy_info->phy_addr == -1) { + if (octeon_has_feature(OCTEON_FEATURE_BGX)) { + if (__cvmx_helper_78xx_parse_phy(phy_info, ipd_port)) { + phy_info->phy_addr = -1; + use_inband = true; + } + } else if (__get_phy_info_from_dt(phy_info, ipd_port) < 0) { + phy_info->phy_addr = -1; + use_inband = true; + } + } + + /* If we can't get the PHY info from the device tree then try + * the inband state. + */ + if (use_inband) { + result.s.full_duplex = 1; + result.s.link_up = 1; + result.s.speed = 1000; + return result; + } + + if (phy_info->phy_addr < 0) + return result; + + if (phy_info->link_function) + result = phy_info->link_function(phy_info); + else + result = cvmx_helper_link_get(ipd_port); + + sfp_info = cvmx_helper_cfg_get_sfp_info(xiface, index); + while (sfp_info) { + /* If the link is down or the link is up but we still register + * the module as being absent, re-check mod_abs. + */ + if (!result.s.link_up || + (result.s.link_up && sfp_info->last_mod_abs)) + __cvmx_helper_update_sfp(ipd_port, sfp_info, result); + sfp_info = sfp_info->next_iface_sfp; + } + + return result; +} + +cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port) +{ + cvmx_helper_link_info_t result; + + /* Unless we fix it later, all links are defaulted to down */ + result.u64 = 0; + + return __cvmx_helper_board_link_get_from_dt(ipd_port); +} + +void cvmx_helper_update_link_led(int xiface, int index, + cvmx_helper_link_info_t result) +{ +} + +void cvmx_helper_leds_show_error(struct cvmx_phy_gpio_leds *leds, bool error) +{ +} + +int __cvmx_helper_board_interface_probe(int interface, int supported_ports) +{ + return supported_ports; +} + +/** + * Returns the Ethernet node offset in the device tree + * + * @param fdt_addr - pointer to flat device tree in memory + * @param aliases - offset of alias in device tree + * @param ipd_port - ipd port number to look up + * + * @returns offset of Ethernet node if >= 0, error if -1 + */ +int __pip_eth_node(const void *fdt_addr, int aliases, int ipd_port) +{ + char name_buffer[20]; + const char *pip_path; + int pip, iface, eth; + int interface_num = cvmx_helper_get_interface_num(ipd_port); + int interface_index = cvmx_helper_get_interface_index_num(ipd_port); + cvmx_helper_interface_mode_t interface_mode = + cvmx_helper_interface_get_mode(interface_num); + + /* The following are not found in the device tree */ + switch (interface_mode) { + case CVMX_HELPER_INTERFACE_MODE_ILK: + case CVMX_HELPER_INTERFACE_MODE_LOOP: + case CVMX_HELPER_INTERFACE_MODE_SRIO: + debug("ERROR: No node expected for interface: %d, port: %d, mode: %s\n", + interface_index, ipd_port, + cvmx_helper_interface_mode_to_string(interface_mode)); + return -1; + default: + break; + } + pip_path = (const char *)fdt_getprop(fdt_addr, aliases, "pip", NULL); + if (!pip_path) { + debug("ERROR: pip path not found in device tree\n"); + return -1; + } + pip = fdt_path_offset(fdt_addr, pip_path); + debug("ipdd_port=%d pip_path=%s pip=%d ", ipd_port, pip_path, pip); + if (pip < 0) { + debug("ERROR: pip not found in device tree\n"); + return -1; + } + snprintf(name_buffer, sizeof(name_buffer), "interface@%d", + interface_num); + iface = fdt_subnode_offset(fdt_addr, pip, name_buffer); + debug("iface=%d ", iface); + if (iface < 0) { + debug("ERROR : pip intf %d not found in device tree\n", + interface_num); + return -1; + } + snprintf(name_buffer, sizeof(name_buffer), "ethernet@%x", + interface_index); + eth = fdt_subnode_offset(fdt_addr, iface, name_buffer); + debug("eth=%d\n", eth); + if (eth < 0) { + debug("ERROR : pip interface@%d ethernet@%d not found in device tree\n", + interface_num, interface_index); + return -1; + } + return eth; +} + +int __mix_eth_node(const void *fdt_addr, int aliases, int interface_index) +{ + char name_buffer[20]; + const char *mix_path; + int mix; + + snprintf(name_buffer, sizeof(name_buffer), "mix%d", interface_index); + mix_path = + (const char *)fdt_getprop(fdt_addr, aliases, name_buffer, NULL); + if (!mix_path) { + debug("ERROR: mix%d path not found in device tree\n", + interface_index); + } + mix = fdt_path_offset(fdt_addr, mix_path); + if (mix < 0) { + debug("ERROR: %s not found in device tree\n", mix_path); + return -1; + } + return mix; +} + +static int __mdiobus_addr_to_unit(u32 addr) +{ + int unit = (addr >> 7) & 3; + + if (!OCTEON_IS_MODEL(OCTEON_CN68XX) && !OCTEON_IS_MODEL(OCTEON_CN78XX)) + unit >>= 1; + return unit; +} + +/** + * Parse the muxed MDIO interface information from the device tree + * + * @param phy_info - pointer to phy info data structure to update + * @param mdio_offset - offset of MDIO bus + * @param mux_offset - offset of MUX, parent of mdio_offset + * + * @return 0 for success or -1 + */ +static int __get_muxed_mdio_info_from_dt(cvmx_phy_info_t *phy_info, + int mdio_offset, int mux_offset) +{ + const void *fdt_addr = CASTPTR(const void *, gd->fdt_blob); + int phandle; + int smi_offset; + int gpio_offset; + u64 smi_addr = 0; + int len; + u32 *pgpio_handle; + int gpio_count = 0; + u32 *prop_val; + int offset; + const char *prop_name; + + debug("%s(%p, 0x%x, 0x%x)\n", __func__, phy_info, mdio_offset, + mux_offset); + + /* Get register value to put onto the GPIO lines to select */ + phy_info->gpio_value = + cvmx_fdt_get_int(fdt_addr, mdio_offset, "reg", -1); + if (phy_info->gpio_value < 0) { + debug("Could not get register value for muxed MDIO bus from DT\n"); + return -1; + } + + smi_offset = cvmx_fdt_lookup_phandle(fdt_addr, mux_offset, + "mdio-parent-bus"); + if (smi_offset < 0) { + debug("Invalid SMI offset for muxed MDIO interface in device tree\n"); + return -1; + } + smi_addr = cvmx_fdt_get_uint64(fdt_addr, smi_offset, "reg", 0); + + /* Convert SMI address to a MDIO interface */ + switch (smi_addr) { + case 0x1180000001800: + case 0x1180000003800: /* 68XX address */ + phy_info->mdio_unit = 0; + break; + case 0x1180000001900: + case 0x1180000003880: + phy_info->mdio_unit = 1; + break; + case 0x1180000003900: + phy_info->mdio_unit = 2; + break; + case 0x1180000003980: + phy_info->mdio_unit = 3; + break; + default: + phy_info->mdio_unit = 1; + break; + } + /* Find the GPIO MUX controller */ + pgpio_handle = + (u32 *)fdt_getprop(fdt_addr, mux_offset, "gpios", &len); + if (!pgpio_handle || len < 12 || (len % 12) != 0 || + len > CVMX_PHY_MUX_MAX_GPIO * 12) { + debug("Invalid GPIO for muxed MDIO controller in DT\n"); + return -1; + } + + for (gpio_count = 0; gpio_count < len / 12; gpio_count++) { + phandle = fdt32_to_cpu(pgpio_handle[gpio_count * 3]); + phy_info->gpio[gpio_count] = + fdt32_to_cpu(pgpio_handle[gpio_count * 3 + 1]); + gpio_offset = fdt_node_offset_by_phandle(fdt_addr, phandle); + if (gpio_offset < 0) { + debug("Cannot access parent GPIO node in DT\n"); + return -1; + } + if (!fdt_node_check_compatible(fdt_addr, gpio_offset, + "cavium,octeon-3860-gpio")) { + phy_info->gpio_type[gpio_count] = GPIO_OCTEON; + } else if (!fdt_node_check_compatible(fdt_addr, gpio_offset, + "nxp,pca8574")) { + /* GPIO is a TWSI GPIO unit which might sit behind + * another mux. + */ + phy_info->gpio_type[gpio_count] = GPIO_PCA8574; + prop_val = (u32 *)fdt_getprop( + fdt_addr, gpio_offset, "reg", NULL); + if (!prop_val) { + debug("Could not find TWSI address of npx pca8574 GPIO from DT\n"); + return -1; + } + /* Get the TWSI address of the GPIO unit */ + phy_info->cvmx_gpio_twsi[gpio_count] = + fdt32_to_cpu(*prop_val); + /* Get the selector on the GPIO mux if present */ + offset = fdt_parent_offset(fdt_addr, gpio_offset); + prop_val = (u32 *)fdt_getprop(fdt_addr, offset, + "reg", NULL); + if (prop_val) { + phy_info->gpio_parent_mux_select = + fdt32_to_cpu(*prop_val); + /* Go up another level */ + offset = fdt_parent_offset(fdt_addr, offset); + if (!fdt_node_check_compatible(fdt_addr, offset, + "nxp,pca9548")) { + prop_val = (u32 *)fdt_getprop( + fdt_addr, offset, "reg", NULL); + if (!prop_val) { + debug("Could not read MUX TWSI address from DT\n"); + return -1; + } + phy_info->gpio_parent_mux_twsi = + fdt32_to_cpu(*prop_val); + } + } + } else { + prop_name = (char *)fdt_getprop(fdt_addr, gpio_offset, + "compatible", NULL); + debug("Unknown GPIO type %s\n", prop_name); + return -1; + } + } + return 0; +} + +/** + * @INTERNAL + * Converts a BGX address to the node, interface and port number + * + * @param bgx_addr Address of CSR register + * + * @return node, interface and port number, will be -1 for invalid address. + */ +static struct cvmx_xiface __cvmx_bgx_reg_addr_to_xiface(u64 bgx_addr) +{ + struct cvmx_xiface xi = { -1, -1 }; + + xi.node = cvmx_csr_addr_to_node(bgx_addr); + bgx_addr = cvmx_csr_addr_strip_node(bgx_addr); + if ((bgx_addr & 0xFFFFFFFFF0000000) != 0x00011800E0000000) { + debug("%s: Invalid BGX address 0x%llx\n", __func__, + (unsigned long long)bgx_addr); + xi.node = -1; + return xi; + } + xi.interface = (bgx_addr >> 24) & 0x0F; + + return xi; +} + +static cvmx_helper_link_info_t +__get_marvell_phy_link_state(cvmx_phy_info_t *phy_info) +{ + cvmx_helper_link_info_t result; + int phy_status; + u32 phy_addr = phy_info->phy_addr; + + result.u64 = 0; + /* Set to page 0 */ + cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, 22, 0); + /* All the speed information can be read from register 17 in one go. */ + phy_status = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 17); + + /* If the resolve bit 11 isn't set, see if autoneg is turned off + * (bit 12, reg 0). The resolve bit doesn't get set properly when + * autoneg is off, so force it + */ + if ((phy_status & (1 << 11)) == 0) { + int auto_status = + cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 0); + if ((auto_status & (1 << 12)) == 0) + phy_status |= 1 << 11; + } + + /* Link is up = Speed/Duplex Resolved + RT-Link Up + G-Link Up. */ + if ((phy_status & 0x0c08) == 0x0c08) { + result.s.link_up = 1; + result.s.full_duplex = ((phy_status >> 13) & 1); + switch ((phy_status >> 14) & 3) { + case 0: /* 10 Mbps */ + result.s.speed = 10; + break; + case 1: /* 100 Mbps */ + result.s.speed = 100; + break; + case 2: /* 1 Gbps */ + result.s.speed = 1000; + break; + case 3: /* Illegal */ + result.u64 = 0; + break; + } + } + return result; +} + +/** + * @INTERNAL + * Get link state of broadcom PHY + * + * @param phy_info PHY information + */ +static cvmx_helper_link_info_t +__get_broadcom_phy_link_state(cvmx_phy_info_t *phy_info) +{ + cvmx_helper_link_info_t result; + u32 phy_addr = phy_info->phy_addr; + int phy_status; + + result.u64 = 0; + /* Below we are going to read SMI/MDIO register 0x19 which works + * on Broadcom parts + */ + phy_status = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 0x19); + switch ((phy_status >> 8) & 0x7) { + case 0: + result.u64 = 0; + break; + case 1: + result.s.link_up = 1; + result.s.full_duplex = 0; + result.s.speed = 10; + break; + case 2: + result.s.link_up = 1; + result.s.full_duplex = 1; + result.s.speed = 10; + break; + case 3: + result.s.link_up = 1; + result.s.full_duplex = 0; + result.s.speed = 100; + break; + case 4: + result.s.link_up = 1; + result.s.full_duplex = 1; + result.s.speed = 100; + break; + case 5: + result.s.link_up = 1; + result.s.full_duplex = 1; + result.s.speed = 100; + break; + case 6: + result.s.link_up = 1; + result.s.full_duplex = 0; + result.s.speed = 1000; + break; + case 7: + result.s.link_up = 1; + result.s.full_duplex = 1; + result.s.speed = 1000; + break; + } + return result; +} + +/** + * @INTERNAL + * Get link state of generic gigabit PHY + * + * @param phy_info - information about the PHY + * + * @returns link status of the PHY + */ +static cvmx_helper_link_info_t +__cvmx_get_generic_8023_c22_phy_link_state(cvmx_phy_info_t *phy_info) +{ + cvmx_helper_link_info_t result; + u32 phy_addr = phy_info->phy_addr; + int phy_basic_control; /* Register 0x0 */ + int phy_basic_status; /* Register 0x1 */ + int phy_anog_adv; /* Register 0x4 */ + int phy_link_part_avail; /* Register 0x5 */ + int phy_control; /* Register 0x9 */ + int phy_status; /* Register 0xA */ + + result.u64 = 0; + + phy_basic_status = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 1); + if (!(phy_basic_status & 0x4)) /* Check if link is up */ + return result; /* Link is down, return link down */ + + result.s.link_up = 1; + phy_basic_control = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 0); + /* Check if autonegotiation is enabled and completed */ + if ((phy_basic_control & (1 << 12)) && (phy_basic_status & (1 << 5))) { + phy_status = + cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 0xA); + phy_control = + cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 0x9); + + phy_status &= phy_control << 2; + phy_link_part_avail = + cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 0x5); + phy_anog_adv = + cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 0x4); + phy_link_part_avail &= phy_anog_adv; + + if (phy_status & 0xC00) { /* Gigabit full or half */ + result.s.speed = 1000; + result.s.full_duplex = !!(phy_status & 0x800); + } else if (phy_link_part_avail & + 0x0180) { /* 100 full or half */ + result.s.speed = 100; + result.s.full_duplex = !!(phy_link_part_avail & 0x100); + } else if (phy_link_part_avail & 0x0060) { + result.s.speed = 10; + result.s.full_duplex = !!(phy_link_part_avail & 0x0040); + } + } else { + /* Not autonegotiated */ + result.s.full_duplex = !!(phy_basic_control & (1 << 8)); + + if (phy_basic_control & (1 << 6)) + result.s.speed = 1000; + else if (phy_basic_control & (1 << 13)) + result.s.speed = 100; + else + result.s.speed = 10; + } + return result; +} + +static cvmx_helper_link_info_t +__cvmx_get_qualcomm_s17_phy_link_state(cvmx_phy_info_t *phy_info) +{ + cvmx_helper_link_info_t result; + u32 phy_addr = phy_info->phy_addr; + int phy_status; + int auto_status; + + result.u64 = 0; + + phy_status = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 17); + + /* If bit 11 isn't set see if autonegotiation is turned off + * (bit 12, reg 0). The resolved bit doesn't get set properly when + * autonegotiation is off, so force it. + */ + if ((phy_status & (1 << 11)) == 0) { + auto_status = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 0); + if ((auto_status & (1 << 12)) == 0) + phy_status |= 1 << 11; + } + /* Only return a link if the PHY has finished autonegotiation and set + * the resolved bit (bit 11). + */ + if (phy_status & (1 << 11)) { + result.s.link_up = 1; + result.s.full_duplex = !!(phy_status & (1 << 13)); + switch ((phy_status >> 14) & 3) { + case 0: /* 10Mbps */ + result.s.speed = 10; + break; + case 1: /* 100Mbps */ + result.s.speed = 100; + break; + case 2: /* 1Gbps */ + result.s.speed = 1000; + break; + default: /* Illegal */ + result.u64 = 0; + break; + } + } + debug(" link: %s, duplex: %s, speed: %lu\n", + result.s.link_up ? "up" : "down", + result.s.full_duplex ? "full" : "half", + (unsigned long)result.s.speed); + return result; +} + +static cvmx_helper_link_info_t +__get_generic_8023_c45_phy_link_state(cvmx_phy_info_t *phy_info) +{ + cvmx_helper_link_info_t result; + int phy_status; + int pma_ctrl1; + u32 phy_addr = phy_info->phy_addr; + + result.u64 = 0; + pma_ctrl1 = cvmx_mdio_45_read(phy_addr >> 8, phy_addr & 0xff, 1, 0); + if ((pma_ctrl1 & 0x207c) == 0x2040) + result.s.speed = 10000; + /* PMA Status 1 (1x0001) */ + phy_status = cvmx_mdio_45_read(phy_addr >> 8, phy_addr & 0xff, 1, 0xa); + if (phy_status < 0) + return result; + + result.s.full_duplex = 1; + if ((phy_status & 1) == 0) + return result; + phy_status = cvmx_mdio_45_read(phy_addr >> 8, phy_addr & 0xff, 4, 0x18); + if (phy_status < 0) + return result; + result.s.link_up = (phy_status & 0x1000) ? 1 : 0; + + return result; +} + +static cvmx_helper_link_info_t +__cvmx_get_cortina_phy_link_state(cvmx_phy_info_t *phy_info) +{ + cvmx_helper_link_info_t result; + + result.s.link_up = 1; + result.s.full_duplex = 1; + result.s.speed = 1000; + return result; +} + +static cvmx_helper_link_info_t +__get_vitesse_vsc8490_phy_link_state(cvmx_phy_info_t *phy_info) +{ + cvmx_helper_link_info_t result; + + result.s.link_up = 1; + result.s.full_duplex = 1; + result.s.speed = 1000; + return result; +} + +static cvmx_helper_link_info_t +__get_aquantia_phy_link_state(cvmx_phy_info_t *phy_info) +{ + cvmx_helper_link_info_t result; + + result.s.link_up = 1; + result.s.full_duplex = 1; + result.s.speed = 1000; + return result; +} + +static int __cvmx_helper_78xx_parse_phy(struct cvmx_phy_info *phy_info, + int ipd_port) +{ + const void *fdt_addr = CASTPTR(const void *, gd->fdt_blob); + const char *compat; + int phy; + int parent; + u64 mdio_base; + int node, bus; + int phy_addr; + int index = cvmx_helper_get_interface_index_num(ipd_port); + int xiface = cvmx_helper_get_interface_num(ipd_port); + int compat_len = 0; + + debug("%s(0x%p, %d) ENTER\n", __func__, phy_info, ipd_port); + + phy = cvmx_helper_get_phy_fdt_node_offset(xiface, index); + debug("%s: xiface: 0x%x, index: %d, ipd_port: %d, phy fdt offset: %d\n", + __func__, xiface, index, ipd_port, phy); + if (phy < 0) { + /* If this is the first time through we need to first parse the + * device tree to get the node offsets. + */ + debug("No config present, calling __cvmx_helper_parse_bgx_dt\n"); + if (__cvmx_helper_parse_bgx_dt(fdt_addr)) { + printf("Error: could not parse BGX device tree\n"); + return -1; + } + if (__cvmx_fdt_parse_vsc7224(fdt_addr)) { + debug("Error: could not parse Microsemi VSC7224 in DT\n"); + return -1; + } + if (octeon_has_feature(OCTEON_FEATURE_BGX_XCV) && + __cvmx_helper_parse_bgx_rgmii_dt(fdt_addr)) { + printf("Error: could not parse BGX XCV device tree\n"); + return -1; + } + phy = cvmx_helper_get_phy_fdt_node_offset(xiface, index); + if (phy < 0) { + debug("%s: Could not get PHY node offset for IPD port 0x%x, xiface: 0x%x, index: %d\n", + __func__, ipd_port, xiface, index); + return -1; + } + debug("%s: phy: %d (%s)\n", __func__, phy, + fdt_get_name(fdt_addr, phy, NULL)); + } + + compat = (const char *)fdt_getprop(fdt_addr, phy, "compatible", + &compat_len); + if (!compat) { + printf("ERROR: %d:%d:no compatible prop in phy\n", xiface, + index); + return -1; + } + + debug(" compatible: %s\n", compat); + + phy_info->fdt_offset = phy; + phy_addr = cvmx_fdt_get_int(fdt_addr, phy, "reg", -1); + if (phy_addr == -1) { + printf("Error: %d:%d:could not get PHY address\n", xiface, + index); + return -1; + } + debug(" PHY address: %d, compat: %s\n", phy_addr, compat); + + if (!memcmp("marvell", compat, strlen("marvell"))) { + phy_info->phy_type = MARVELL_GENERIC_PHY; + phy_info->link_function = __get_marvell_phy_link_state; + } else if (!memcmp("broadcom", compat, strlen("broadcom"))) { + phy_info->phy_type = BROADCOM_GENERIC_PHY; + phy_info->link_function = __get_broadcom_phy_link_state; + } else if (!memcmp("cortina", compat, strlen("cortina"))) { + phy_info->phy_type = CORTINA_PHY; + phy_info->link_function = __cvmx_get_cortina_phy_link_state; + } else if (!strcmp("vitesse,vsc8490", compat)) { + phy_info->phy_type = VITESSE_VSC8490_PHY; + phy_info->link_function = __get_vitesse_vsc8490_phy_link_state; + } else if (fdt_stringlist_contains(compat, compat_len, + "ethernet-phy-ieee802.3-c22")) { + phy_info->phy_type = GENERIC_8023_C22_PHY; + phy_info->link_function = + __cvmx_get_generic_8023_c22_phy_link_state; + } else if (fdt_stringlist_contains(compat, compat_len, + "ethernet-phy-ieee802.3-c45")) { + phy_info->phy_type = GENERIC_8023_C22_PHY; + phy_info->link_function = __get_generic_8023_c45_phy_link_state; + } + + phy_info->ipd_port = ipd_port; + phy_info->phy_sub_addr = 0; + phy_info->direct_connect = 1; + + parent = fdt_parent_offset(fdt_addr, phy); + if (!fdt_node_check_compatible(fdt_addr, parent, + "ethernet-phy-nexus")) { + debug(" nexus PHY found\n"); + if (phy_info->phy_type == CORTINA_PHY) { + /* The Cortina CS422X uses the same PHY device for + * multiple ports for XFI. In this case we use a + * nexus and each PHY address is the slice or + * sub-address and the actual PHY address is the + * nexus address. + */ + phy_info->phy_sub_addr = phy_addr; + phy_addr = + cvmx_fdt_get_int(fdt_addr, parent, "reg", -1); + debug(" Cortina PHY real address: 0x%x\n", phy_addr); + } + parent = fdt_parent_offset(fdt_addr, parent); + } + + debug(" Parent: %s\n", fdt_get_name(fdt_addr, parent, NULL)); + if (!fdt_node_check_compatible(fdt_addr, parent, + "cavium,octeon-3860-mdio")) { + debug(" Found Octeon MDIO\n"); + mdio_base = cvmx_fdt_get_uint64(fdt_addr, parent, "reg", + FDT_ADDR_T_NONE); + debug(" MDIO address: 0x%llx\n", + (unsigned long long)mdio_base); + + mdio_base = cvmx_fdt_translate_address(fdt_addr, parent, + (u32 *)&mdio_base); + debug(" Translated: 0x%llx\n", (unsigned long long)mdio_base); + if (mdio_base == FDT_ADDR_T_NONE) { + printf("Could not get MDIO base address from reg field\n"); + return -1; + } + __cvmx_mdio_addr_to_node_bus(mdio_base, &node, &bus); + if (bus < 0) { + printf("Invalid MDIO address 0x%llx, could not detect bus and node\n", + (unsigned long long)mdio_base); + return -1; + } + debug(" MDIO node: %d, bus: %d\n", node, bus); + phy_info->mdio_unit = (node << 2) | (bus & 3); + phy_info->phy_addr = phy_addr | (phy_info->mdio_unit << 8); + } else { + printf("%s: Error: incompatible MDIO bus %s for IPD port %d\n", + __func__, + (const char *)fdt_get_name(fdt_addr, parent, NULL), + ipd_port); + return -1; + } + + debug("%s: EXIT 0\n", __func__); + + return 0; +} + +/** + * Return the MII PHY address associated with the given IPD + * port. The phy address is obtained from the device tree. + * + * @param[out] phy_info - PHY information data structure updated + * @param ipd_port Octeon IPD port to get the MII address for. + * + * @return MII PHY address and bus number, -1 on error, -2 if PHY info missing (OK). + */ +static int __get_phy_info_from_dt(cvmx_phy_info_t *phy_info, int ipd_port) +{ + const void *fdt_addr = CASTPTR(const void *, gd->fdt_blob); + int aliases, eth, phy, phy_parent, ret, i; + int mdio_parent; + const char *phy_compatible_str; + const char *host_mode_str = NULL; + int interface; + int phy_addr_offset = 0; + + debug("%s(%p, %d)\n", __func__, phy_info, ipd_port); + + if (octeon_has_feature(OCTEON_FEATURE_BGX)) + return __cvmx_helper_78xx_parse_phy(phy_info, ipd_port); + + phy_info->phy_addr = -1; + phy_info->phy_sub_addr = 0; + phy_info->ipd_port = ipd_port; + phy_info->direct_connect = -1; + phy_info->phy_type = (cvmx_phy_type_t)-1; + for (i = 0; i < CVMX_PHY_MUX_MAX_GPIO; i++) + phy_info->gpio[i] = -1; + phy_info->mdio_unit = -1; + phy_info->gpio_value = -1; + phy_info->gpio_parent_mux_twsi = -1; + phy_info->gpio_parent_mux_select = -1; + phy_info->link_function = NULL; + phy_info->fdt_offset = -1; + if (!fdt_addr) { + debug("No device tree found.\n"); + return -1; + } + + aliases = fdt_path_offset(fdt_addr, "/aliases"); + if (aliases < 0) { + debug("Error: No /aliases node in device tree.\n"); + return -1; + } + if (ipd_port < 0) { + int interface_index = + ipd_port - CVMX_HELPER_BOARD_MGMT_IPD_PORT; + eth = __mix_eth_node(fdt_addr, aliases, interface_index); + } else { + eth = __pip_eth_node(fdt_addr, aliases, ipd_port); + } + if (eth < 0) { + debug("ERROR : cannot find interface for ipd_port=%d\n", + ipd_port); + return -1; + } + + interface = cvmx_helper_get_interface_num(ipd_port); + /* Get handle to phy */ + phy = cvmx_fdt_lookup_phandle(fdt_addr, eth, "phy-handle"); + if (phy < 0) { + cvmx_helper_interface_mode_t if_mode; + + /* Note that it's OK for RXAUI and ILK to not have a PHY + * connected (i.e. EBB boards in loopback). + */ + debug("Cannot get phy-handle for ipd_port: %d\n", ipd_port); + if_mode = cvmx_helper_interface_get_mode(interface); + if (if_mode != CVMX_HELPER_INTERFACE_MODE_RXAUI && + if_mode != CVMX_HELPER_INTERFACE_MODE_ILK) { + debug("ERROR : phy handle not found in device tree ipd_port=%d\n", + ipd_port); + return -1; + } else { + return -2; + } + } + + phy_compatible_str = + (const char *)fdt_getprop(fdt_addr, phy, "compatible", NULL); + if (!phy_compatible_str) { + debug("ERROR: no compatible prop in phy\n"); + return -1; + } + debug("Checking compatible string \"%s\" for ipd port %d\n", + phy_compatible_str, ipd_port); + phy_info->fdt_offset = phy; + if (!memcmp("marvell", phy_compatible_str, strlen("marvell"))) { + debug("Marvell PHY detected for ipd_port %d\n", ipd_port); + phy_info->phy_type = MARVELL_GENERIC_PHY; + phy_info->link_function = __get_marvell_phy_link_state; + } else if (!memcmp("broadcom", phy_compatible_str, + strlen("broadcom"))) { + phy_info->phy_type = BROADCOM_GENERIC_PHY; + phy_info->link_function = __get_broadcom_phy_link_state; + debug("Broadcom PHY detected for ipd_port %d\n", ipd_port); + } else if (!memcmp("vitesse", phy_compatible_str, strlen("vitesse"))) { + debug("Vitesse PHY detected for ipd_port %d\n", ipd_port); + if (!fdt_node_check_compatible(fdt_addr, phy, + "vitesse,vsc8490")) { + phy_info->phy_type = VITESSE_VSC8490_PHY; + debug("Vitesse VSC8490 detected\n"); + phy_info->link_function = + __get_vitesse_vsc8490_phy_link_state; + } else if (!fdt_node_check_compatible( + fdt_addr, phy, + "ethernet-phy-ieee802.3-c22")) { + phy_info->phy_type = GENERIC_8023_C22_PHY; + phy_info->link_function = + __cvmx_get_generic_8023_c22_phy_link_state; + debug("Vitesse 802.3 c22 detected\n"); + } else { + phy_info->phy_type = GENERIC_8023_C45_PHY; + phy_info->link_function = + __get_generic_8023_c45_phy_link_state; + debug("Vitesse 802.3 c45 detected\n"); + } + } else if (!memcmp("aquantia", phy_compatible_str, + strlen("aquantia"))) { + phy_info->phy_type = AQUANTIA_PHY; + phy_info->link_function = __get_aquantia_phy_link_state; + debug("Aquantia c45 PHY detected\n"); + } else if (!memcmp("cortina", phy_compatible_str, strlen("cortina"))) { + phy_info->phy_type = CORTINA_PHY; + phy_info->link_function = __cvmx_get_cortina_phy_link_state; + host_mode_str = (const char *)fdt_getprop( + fdt_addr, phy, "cortina,host-mode", NULL); + debug("Cortina PHY detected for ipd_port %d\n", ipd_port); + } else if (!memcmp("ti", phy_compatible_str, strlen("ti"))) { + phy_info->phy_type = GENERIC_8023_C45_PHY; + phy_info->link_function = __get_generic_8023_c45_phy_link_state; + debug("TI PHY detected for ipd_port %d\n", ipd_port); + } else if (!fdt_node_check_compatible(fdt_addr, phy, + "atheros,ar8334") || + !fdt_node_check_compatible(fdt_addr, phy, + "qualcomm,qca8334") || + !fdt_node_check_compatible(fdt_addr, phy, + "atheros,ar8337") || + !fdt_node_check_compatible(fdt_addr, phy, + "qualcomm,qca8337")) { + phy_info->phy_type = QUALCOMM_S17; + phy_info->link_function = + __cvmx_get_qualcomm_s17_phy_link_state; + debug("Qualcomm QCA833X switch detected\n"); + } else if (!fdt_node_check_compatible(fdt_addr, phy, + "ethernet-phy-ieee802.3-c22")) { + phy_info->phy_type = GENERIC_8023_C22_PHY; + phy_info->link_function = + __cvmx_get_generic_8023_c22_phy_link_state; + debug("Generic 802.3 c22 PHY detected\n"); + } else if (!fdt_node_check_compatible(fdt_addr, phy, + "ethernet-phy-ieee802.3-c45")) { + phy_info->phy_type = GENERIC_8023_C45_PHY; + phy_info->link_function = __get_generic_8023_c45_phy_link_state; + debug("Generic 802.3 c45 PHY detected\n"); + } else { + debug("Unknown PHY compatibility\n"); + phy_info->phy_type = (cvmx_phy_type_t)-1; + phy_info->link_function = NULL; + } + + phy_info->host_mode = CVMX_PHY_HOST_MODE_UNKNOWN; + if (host_mode_str) { + if (strcmp(host_mode_str, "rxaui") == 0) + phy_info->host_mode = CVMX_PHY_HOST_MODE_RXAUI; + else if (strcmp(host_mode_str, "xaui") == 0) + phy_info->host_mode = CVMX_PHY_HOST_MODE_XAUI; + else if (strcmp(host_mode_str, "sgmii") == 0) + phy_info->host_mode = CVMX_PHY_HOST_MODE_SGMII; + else if (strcmp(host_mode_str, "qsgmii") == 0) + phy_info->host_mode = CVMX_PHY_HOST_MODE_QSGMII; + else + debug("Unknown PHY host mode\n"); + } + + /* Check if PHY parent is the octeon MDIO bus. Some boards are connected + * though a MUX and for them direct_connect_to_phy will be 0 + */ + phy_parent = fdt_parent_offset(fdt_addr, phy); + if (phy_parent < 0) { + debug("ERROR : cannot find phy parent for ipd_port=%d ret=%d\n", + ipd_port, phy_parent); + return -1; + } + /* For multi-phy devices and devices on a MUX, go to the parent */ + ret = fdt_node_check_compatible(fdt_addr, phy_parent, + "ethernet-phy-nexus"); + if (ret == 0) { + /* It's a nexus so check the grandparent. */ + phy_addr_offset = + cvmx_fdt_get_int(fdt_addr, phy_parent, "reg", 0); + phy_parent = fdt_parent_offset(fdt_addr, phy_parent); + } + + /* Check for a muxed MDIO interface */ + mdio_parent = fdt_parent_offset(fdt_addr, phy_parent); + ret = fdt_node_check_compatible(fdt_addr, mdio_parent, + "cavium,mdio-mux"); + if (ret == 0) { + ret = __get_muxed_mdio_info_from_dt(phy_info, phy_parent, + mdio_parent); + if (ret) { + printf("Error reading mdio mux information for ipd port %d\n", + ipd_port); + return -1; + } + } + ret = fdt_node_check_compatible(fdt_addr, phy_parent, + "cavium,octeon-3860-mdio"); + if (ret == 0) { + u32 *mdio_reg_base = + (u32 *)fdt_getprop(fdt_addr, phy_parent, "reg", 0); + phy_info->direct_connect = 1; + if (mdio_reg_base == 0) { + debug("ERROR : unable to get reg property in phy mdio\n"); + return -1; + } + phy_info->mdio_unit = + __mdiobus_addr_to_unit(fdt32_to_cpu(mdio_reg_base[1])); + debug("phy parent=%s reg_base=%08x mdio_unit=%d\n", + fdt_get_name(fdt_addr, phy_parent, NULL), + (int)mdio_reg_base[1], phy_info->mdio_unit); + } else { + phy_info->direct_connect = 0; + /* The PHY is not directly connected to the Octeon MDIO bus. + * SE doesn't have abstractions for MDIO MUX or MDIO MUX + * drivers and hence for the non direct cases code will be + * needed which is board specific. + * For now the MDIO Unit is defaulted to 1. + */ + debug("%s PHY at address: %d is not directly connected\n", + __func__, phy_info->phy_addr); + } + + phy_info->phy_addr = cvmx_fdt_get_int(fdt_addr, phy, "reg", -1); + if (phy_info->phy_addr < 0) { + debug("ERROR: Could not read phy address from reg in DT\n"); + return -1; + } + phy_info->phy_addr += phy_addr_offset; + phy_info->phy_addr |= phy_info->mdio_unit << 8; + debug("%s(%p, %d) => 0x%x\n", __func__, phy_info, ipd_port, + phy_info->phy_addr); + return phy_info->phy_addr; +} + +/** + * @INTERNAL + * Parse the device tree and set whether a port is valid or not. + * + * @param fdt_addr Pointer to device tree + * + * @return 0 for success, -1 on error. + */ +int __cvmx_helper_parse_bgx_dt(const void *fdt_addr) +{ + int port_index; + struct cvmx_xiface xi; + int fdt_port_node = -1; + int fdt_interface_node; + int fdt_phy_node; + u64 reg_addr; + int xiface; + struct cvmx_phy_info *phy_info; + static bool parsed; + int err; + int ipd_port; + + if (parsed) { + debug("%s: Already parsed\n", __func__); + return 0; + } + while ((fdt_port_node = fdt_node_offset_by_compatible( + fdt_addr, fdt_port_node, + "cavium,octeon-7890-bgx-port")) >= 0) { + /* Get the port number */ + port_index = + cvmx_fdt_get_int(fdt_addr, fdt_port_node, "reg", -1); + if (port_index < 0) { + debug("Error: missing reg field for bgx port in device tree\n"); + return -1; + } + debug("%s: Parsing BGX port %d\n", __func__, port_index); + /* Get the interface number */ + fdt_interface_node = fdt_parent_offset(fdt_addr, fdt_port_node); + if (fdt_interface_node < 0) { + debug("Error: device tree corrupt!\n"); + return -1; + } + if (fdt_node_check_compatible(fdt_addr, fdt_interface_node, + "cavium,octeon-7890-bgx")) { + debug("Error: incompatible Ethernet MAC Nexus in device tree!\n"); + return -1; + } + reg_addr = + cvmx_fdt_get_addr(fdt_addr, fdt_interface_node, "reg"); + debug("%s: BGX interface address: 0x%llx\n", __func__, + (unsigned long long)reg_addr); + if (reg_addr == FDT_ADDR_T_NONE) { + debug("Device tree BGX node has invalid address 0x%llx\n", + (unsigned long long)reg_addr); + return -1; + } + reg_addr = cvmx_fdt_translate_address(fdt_addr, + fdt_interface_node, + (u32 *)®_addr); + xi = __cvmx_bgx_reg_addr_to_xiface(reg_addr); + if (xi.node < 0) { + debug("Device tree BGX node has invalid address 0x%llx\n", + (unsigned long long)reg_addr); + return -1; + } + debug("%s: Found BGX node %d, interface %d\n", __func__, + xi.node, xi.interface); + xiface = cvmx_helper_node_interface_to_xiface(xi.node, + xi.interface); + cvmx_helper_set_port_fdt_node_offset(xiface, port_index, + fdt_port_node); + cvmx_helper_set_port_valid(xiface, port_index, true); + + cvmx_helper_set_port_fdt_node_offset(xiface, port_index, + fdt_port_node); + if (fdt_getprop(fdt_addr, fdt_port_node, + "cavium,sgmii-mac-phy-mode", NULL)) + cvmx_helper_set_mac_phy_mode(xiface, port_index, true); + else + cvmx_helper_set_mac_phy_mode(xiface, port_index, false); + + if (fdt_getprop(fdt_addr, fdt_port_node, "cavium,force-link-up", + NULL)) + cvmx_helper_set_port_force_link_up(xiface, port_index, + true); + else + cvmx_helper_set_port_force_link_up(xiface, port_index, + false); + + if (fdt_getprop(fdt_addr, fdt_port_node, + "cavium,sgmii-mac-1000x-mode", NULL)) + cvmx_helper_set_1000x_mode(xiface, port_index, true); + else + cvmx_helper_set_1000x_mode(xiface, port_index, false); + + if (fdt_getprop(fdt_addr, fdt_port_node, + "cavium,disable-autonegotiation", NULL)) + cvmx_helper_set_port_autonegotiation(xiface, port_index, + false); + else + cvmx_helper_set_port_autonegotiation(xiface, port_index, + true); + + fdt_phy_node = cvmx_fdt_lookup_phandle(fdt_addr, fdt_port_node, + "phy-handle"); + if (fdt_phy_node >= 0) { + cvmx_helper_set_phy_fdt_node_offset(xiface, port_index, + fdt_phy_node); + debug("%s: Setting PHY fdt node offset for interface 0x%x, port %d to %d\n", + __func__, xiface, port_index, fdt_phy_node); + debug("%s: PHY node name: %s\n", __func__, + fdt_get_name(fdt_addr, fdt_phy_node, NULL)); + cvmx_helper_set_port_phy_present(xiface, port_index, + true); + ipd_port = cvmx_helper_get_ipd_port(xiface, port_index); + if (ipd_port >= 0) { + debug("%s: Allocating phy info for 0x%x:%d\n", + __func__, xiface, port_index); + phy_info = + (cvmx_phy_info_t *)cvmx_bootmem_alloc( + sizeof(*phy_info), 0); + if (!phy_info) { + debug("%s: Out of memory\n", __func__); + return -1; + } + memset(phy_info, 0, sizeof(*phy_info)); + phy_info->phy_addr = -1; + err = __get_phy_info_from_dt(phy_info, + ipd_port); + if (err) { + debug("%s: Error parsing phy info for ipd port %d\n", + __func__, ipd_port); + return -1; + } + cvmx_helper_set_port_phy_info( + xiface, port_index, phy_info); + debug("%s: Saved phy info\n", __func__); + } + } else { + cvmx_helper_set_phy_fdt_node_offset(xiface, port_index, + -1); + debug("%s: No PHY fdt node offset for interface 0x%x, port %d to %d\n", + __func__, xiface, port_index, fdt_phy_node); + cvmx_helper_set_port_phy_present(xiface, port_index, + false); + } + } + if (!sfp_parsed) + if (cvmx_sfp_parse_device_tree(fdt_addr)) + debug("%s: Error parsing SFP device tree\n", __func__); + parsed = true; + return 0; +} + +int __cvmx_helper_parse_bgx_rgmii_dt(const void *fdt_addr) +{ + u64 reg_addr; + struct cvmx_xiface xi; + int fdt_port_node = -1; + int fdt_interface_node; + int fdt_phy_node; + int port_index; + int xiface; + + /* There's only one xcv (RGMII) interface, so just search for the one + * that's part of a BGX entry. + */ + while ((fdt_port_node = fdt_node_offset_by_compatible( + fdt_addr, fdt_port_node, "cavium,octeon-7360-xcv")) >= + 0) { + fdt_interface_node = fdt_parent_offset(fdt_addr, fdt_port_node); + if (fdt_interface_node < 0) { + printf("Error: device tree corrupt!\n"); + return -1; + } + debug("%s: XCV parent node compatible: %s\n", __func__, + (char *)fdt_getprop(fdt_addr, fdt_interface_node, + "compatible", NULL)); + if (!fdt_node_check_compatible(fdt_addr, fdt_interface_node, + "cavium,octeon-7890-bgx")) + break; + } + if (fdt_port_node == -FDT_ERR_NOTFOUND) { + debug("No XCV/RGMII interface found in device tree\n"); + return 0; + } else if (fdt_port_node < 0) { + debug("%s: Error %d parsing device tree\n", __func__, + fdt_port_node); + return -1; + } + port_index = cvmx_fdt_get_int(fdt_addr, fdt_port_node, "reg", -1); + if (port_index != 0) { + printf("%s: Error: port index (reg) must be 0, not %d.\n", + __func__, port_index); + return -1; + } + reg_addr = cvmx_fdt_get_addr(fdt_addr, fdt_interface_node, "reg"); + if (reg_addr == FDT_ADDR_T_NONE) { + printf("%s: Error: could not get BGX interface address\n", + __func__); + return -1; + } + /* We don't have to bother translating since only 78xx supports OCX and + * doesn't support RGMII. + */ + xi = __cvmx_bgx_reg_addr_to_xiface(reg_addr); + debug("%s: xi.node: %d, xi.interface: 0x%x, addr: 0x%llx\n", __func__, + xi.node, xi.interface, (unsigned long long)reg_addr); + if (xi.node < 0) { + printf("%s: Device tree BGX node has invalid address 0x%llx\n", + __func__, (unsigned long long)reg_addr); + return -1; + } + debug("%s: Found XCV (RGMII) interface on interface %d\n", __func__, + xi.interface); + debug(" phy handle: 0x%x\n", + cvmx_fdt_get_int(fdt_addr, fdt_port_node, "phy-handle", -1)); + fdt_phy_node = + cvmx_fdt_lookup_phandle(fdt_addr, fdt_port_node, "phy-handle"); + debug("%s: phy-handle node: 0x%x\n", __func__, fdt_phy_node); + xiface = cvmx_helper_node_interface_to_xiface(xi.node, xi.interface); + + cvmx_helper_set_port_fdt_node_offset(xiface, port_index, fdt_port_node); + if (fdt_phy_node >= 0) { + debug("%s: Setting PHY fdt node offset for interface 0x%x, port %d to %d\n", + __func__, xiface, port_index, fdt_phy_node); + debug("%s: PHY node name: %s\n", __func__, + fdt_get_name(fdt_addr, fdt_phy_node, NULL)); + cvmx_helper_set_phy_fdt_node_offset(xiface, port_index, + fdt_phy_node); + cvmx_helper_set_port_phy_present(xiface, port_index, true); + } else { + cvmx_helper_set_phy_fdt_node_offset(xiface, port_index, -1); + debug("%s: No PHY fdt node offset for interface 0x%x, port %d to %d\n", + __func__, xiface, port_index, fdt_phy_node); + cvmx_helper_set_port_phy_present(xiface, port_index, false); + } + + return 0; +} + +/** + * Returns if a port is present on an interface + * + * @param fdt_addr - address fo flat device tree + * @param ipd_port - IPD port number + * + * @return 1 if port is present, 0 if not present, -1 if error + */ +int __cvmx_helper_board_get_port_from_dt(void *fdt_addr, int ipd_port) +{ + int port_index; + int aliases; + const char *pip_path; + char name_buffer[24]; + int pip, iface, eth; + cvmx_helper_interface_mode_t mode; + int xiface = cvmx_helper_get_interface_num(ipd_port); + struct cvmx_xiface xi = cvmx_helper_xiface_to_node_interface(xiface); + u32 val; + int phy_node_offset; + int parse_bgx_dt_err; + int parse_vsc7224_err; + + debug("%s(%p, %d)\n", __func__, fdt_addr, ipd_port); + if (octeon_has_feature(OCTEON_FEATURE_BGX)) { + static int fdt_ports_initialized; + + port_index = cvmx_helper_get_interface_index_num(ipd_port); + + if (!fdt_ports_initialized) { + if (octeon_has_feature(OCTEON_FEATURE_BGX_XCV)) { + if (!__cvmx_helper_parse_bgx_rgmii_dt(fdt_addr)) + fdt_ports_initialized = 1; + parse_bgx_dt_err = + __cvmx_helper_parse_bgx_dt(fdt_addr); + parse_vsc7224_err = + __cvmx_fdt_parse_vsc7224(fdt_addr); + if (!parse_bgx_dt_err && !parse_vsc7224_err) + fdt_ports_initialized = 1; + } else { + debug("%s: Error parsing FDT\n", __func__); + return -1; + } + } + + return cvmx_helper_is_port_valid(xiface, port_index); + } + + mode = cvmx_helper_interface_get_mode(xiface); + + switch (mode) { + /* Device tree has information about the following mode types. */ + case CVMX_HELPER_INTERFACE_MODE_RGMII: + case CVMX_HELPER_INTERFACE_MODE_GMII: + case CVMX_HELPER_INTERFACE_MODE_SPI: + case CVMX_HELPER_INTERFACE_MODE_XAUI: + case CVMX_HELPER_INTERFACE_MODE_SGMII: + case CVMX_HELPER_INTERFACE_MODE_QSGMII: + case CVMX_HELPER_INTERFACE_MODE_RXAUI: + case CVMX_HELPER_INTERFACE_MODE_AGL: + case CVMX_HELPER_INTERFACE_MODE_XLAUI: + case CVMX_HELPER_INTERFACE_MODE_XFI: + aliases = 1; + break; + default: + aliases = 0; + break; + } + + /* The device tree information is present on interfaces that have phy */ + if (!aliases) + return 1; + + port_index = cvmx_helper_get_interface_index_num(ipd_port); + + aliases = fdt_path_offset(fdt_addr, "/aliases"); + if (aliases < 0) { + debug("%s: ERROR: /aliases not found in device tree fdt_addr=%p\n", + __func__, fdt_addr); + return -1; + } + + pip_path = (const char *)fdt_getprop(fdt_addr, aliases, "pip", NULL); + if (!pip_path) { + debug("%s: ERROR: interface %x pip path not found in device tree\n", + __func__, xiface); + return -1; + } + pip = fdt_path_offset(fdt_addr, pip_path); + if (pip < 0) { + debug("%s: ERROR: interface %x pip not found in device tree\n", + __func__, xiface); + return -1; + } + snprintf(name_buffer, sizeof(name_buffer), "interface@%d", + xi.interface); + iface = fdt_subnode_offset(fdt_addr, pip, name_buffer); + if (iface < 0) + return 0; + snprintf(name_buffer, sizeof(name_buffer), "ethernet@%x", port_index); + eth = fdt_subnode_offset(fdt_addr, iface, name_buffer); + debug("%s: eth subnode offset %d from %s\n", __func__, eth, + name_buffer); + + if (eth < 0) + return -1; + + cvmx_helper_set_port_fdt_node_offset(xiface, port_index, eth); + + phy_node_offset = cvmx_fdt_get_int(fdt_addr, eth, "phy", -1); + cvmx_helper_set_phy_fdt_node_offset(xiface, port_index, + phy_node_offset); + + if (fdt_getprop(fdt_addr, eth, "cavium,sgmii-mac-phy-mode", NULL)) + cvmx_helper_set_mac_phy_mode(xiface, port_index, true); + else + cvmx_helper_set_mac_phy_mode(xiface, port_index, false); + + if (fdt_getprop(fdt_addr, eth, "cavium,force-link-up", NULL)) + cvmx_helper_set_port_force_link_up(xiface, port_index, true); + else + cvmx_helper_set_port_force_link_up(xiface, port_index, false); + + if (fdt_getprop(fdt_addr, eth, "cavium,sgmii-mac-1000x-mode", NULL)) + cvmx_helper_set_1000x_mode(xiface, port_index, true); + else + cvmx_helper_set_1000x_mode(xiface, port_index, false); + + if (fdt_getprop(fdt_addr, eth, "cavium,disable-autonegotiation", NULL)) + cvmx_helper_set_port_autonegotiation(xiface, port_index, false); + else + cvmx_helper_set_port_autonegotiation(xiface, port_index, true); + + if (mode == CVMX_HELPER_INTERFACE_MODE_AGL) { + bool tx_bypass = false; + + if (fdt_getprop(fdt_addr, eth, "cavium,rx-clk-delay-bypass", + NULL)) + cvmx_helper_set_agl_rx_clock_delay_bypass( + xiface, port_index, true); + else + cvmx_helper_set_agl_rx_clock_delay_bypass( + xiface, port_index, false); + + val = cvmx_fdt_get_int(fdt_addr, eth, "cavium,rx-clk-skew", 0); + cvmx_helper_set_agl_rx_clock_skew(xiface, port_index, val); + + if (fdt_getprop(fdt_addr, eth, "cavium,tx-clk-delay-bypass", + NULL)) + tx_bypass = true; + + val = cvmx_fdt_get_int(fdt_addr, eth, "tx-clk-delay", 0); + cvmx_helper_cfg_set_rgmii_tx_clk_delay(xiface, port_index, + tx_bypass, val); + + val = cvmx_fdt_get_int(fdt_addr, eth, "cavium,refclk-sel", 0); + cvmx_helper_set_agl_refclk_sel(xiface, port_index, val); + } + + return (eth >= 0); +} + +/** + * Given the address of the MDIO registers, output the CPU node and MDIO bus + * + * @param addr 64-bit address of MDIO registers (from device tree) + * @param[out] node CPU node number (78xx) + * @param[out] bus MDIO bus number + */ +void __cvmx_mdio_addr_to_node_bus(u64 addr, int *node, int *bus) +{ + if (OCTEON_IS_MODEL(OCTEON_CN78XX)) { + if (node) + *node = cvmx_csr_addr_to_node(addr); + addr = cvmx_csr_addr_strip_node(addr); + } else { + if (node) + *node = 0; + } + if (OCTEON_IS_MODEL(OCTEON_CN68XX) || OCTEON_IS_MODEL(OCTEON_CN78XX)) { + switch (addr) { + case 0x0001180000003800: + *bus = 0; + break; + case 0x0001180000003880: + *bus = 1; + break; + case 0x0001180000003900: + *bus = 2; + break; + case 0x0001180000003980: + *bus = 3; + break; + default: + *bus = -1; + printf("%s: Invalid SMI bus address 0x%llx\n", __func__, + (unsigned long long)addr); + break; + } + } else if (OCTEON_IS_MODEL(OCTEON_CN73XX) || + OCTEON_IS_MODEL(OCTEON_CNF75XX)) { + switch (addr) { + case 0x0001180000003800: + *bus = 0; + break; + case 0x0001180000003880: + *bus = 1; + break; + default: + *bus = -1; + printf("%s: Invalid SMI bus address 0x%llx\n", __func__, + (unsigned long long)addr); + break; + } + } else { + switch (addr) { + case 0x0001180000001800: + *bus = 0; + break; + case 0x0001180000001900: + *bus = 1; + break; + default: + *bus = -1; + printf("%s: Invalid SMI bus address 0x%llx\n", __func__, + (unsigned long long)addr); + break; + } + } +} -- 2.39.5