From b6d8d4b1007df5068e6c9e428b4665009486c181 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 10 Jun 2021 17:59:46 +0200 Subject: [PATCH] arm64: zynqmp: Use overlay sugar syntax for Kria SOM dtc supports new sugar syntax which is easier compare to previous one that's why also covert overlays for SOM to it. Signed-off-by: Michal Simek --- arch/arm/dts/zynqmp-sck-kv-g-revA.dts | 592 ++++++++++++-------------- arch/arm/dts/zynqmp-sck-kv-g-revB.dts | 571 ++++++++++++------------- 2 files changed, 545 insertions(+), 618 deletions(-) diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revA.dts b/arch/arm/dts/zynqmp-sck-kv-g-revA.dts index cad2d05721..cca009e7c7 100644 --- a/arch/arm/dts/zynqmp-sck-kv-g-revA.dts +++ b/arch/arm/dts/zynqmp-sck-kv-g-revA.dts @@ -20,354 +20,316 @@ /dts-v1/; /plugin/; -/{ +&{/} { compatible = "xlnx,zynqmp-sk-kv260-revA", "xlnx,zynqmp-sk-kv260-revY", "xlnx,zynqmp-sk-kv260-revZ", "xlnx,zynqmp-sk-kv260", "xlnx,zynqmp"; +}; - fragment1 { - target = <&i2c1>; /* I2C_SCK C23/C24 - MIO from SOM */ - - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default", "gpio"; - pinctrl-0 = <&pinctrl_i2c1_default>; - pinctrl-1 = <&pinctrl_i2c1_gpio>; - scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; - sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; - - u14: ina260@40 { /* u14 */ - compatible = "ti,ina260"; - #io-channel-cells = <1>; - label = "ina260-u14"; - reg = <0x40>; - }; - /* u27 - 0xe0 - STDP4320 DP/HDMI splitter */ - }; +&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; + + u14: ina260@40 { /* u14 */ + compatible = "ti,ina260"; + #io-channel-cells = <1>; + label = "ina260-u14"; + reg = <0x40>; }; + /* u27 - 0xe0 - STDP4320 DP/HDMI splitter */ +}; - fragment1a { - target = <&amba>; - __overlay__ { - ina260-u14 { - compatible = "iio-hwmon"; - io-channels = <&u14 0>, <&u14 1>, <&u14 2>; - }; - - si5332_0: si5332_0 { /* u17 */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - }; - - si5332_1: si5332_1 { /* u17 */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - si5332_2: si5332_2 { /* u17 */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <48000000>; - }; - - si5332_3: si5332_3 { /* u17 */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; - }; - - si5332_4: si5332_4 { /* u17 */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <26000000>; - }; - - si5332_5: si5332_5 { /* u17 */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <27000000>; - }; - }; +&amba { + ina260-u14 { + compatible = "iio-hwmon"; + io-channels = <&u14 0>, <&u14 1>, <&u14 2>; }; + si5332_0: si5332_0 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + si5332_1: si5332_1 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + si5332_2: si5332_2 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; + + si5332_3: si5332_3 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + si5332_4: si5332_4 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + si5332_5: si5332_5 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; +}; + /* DP/USB 3.0 and SATA */ - fragment2 { - target = <&psgtr>; - __overlay__ { - status = "okay"; - /* pcie, usb3, sata */ - clocks = <&si5332_5>, <&si5332_4>, <&si5332_0>; - clock-names = "ref0", "ref1", "ref2"; - }; +&psgtr { + status = "okay"; + /* pcie, usb3, sata */ + clocks = <&si5332_5>, <&si5332_4>, <&si5332_0>; + clock-names = "ref0", "ref1", "ref2"; +}; + +&sata { + status = "okay"; + /* SATA OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + phy-names = "sata-phy"; + phys = <&psgtr 3 PHY_TYPE_SATA 1 2>; +}; + +&zynqmp_dpsub { + status = "disabled"; + phy-names = "dp-phy0", "dp-phy1"; + phys = <&psgtr 1 PHY_TYPE_DP 0 0>, <&psgtr 0 PHY_TYPE_DP 1 0>; +}; + +&zynqmp_dpdma { + status = "okay"; +}; + +&usb0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; + usbhub: usb5744 { /* u43 */ + compatible = "microchip,usb5744"; + reset-gpios = <&gpio 44 GPIO_ACTIVE_HIGH>; }; +}; + +&dwc3_0 { + status = "okay"; + dr_mode = "host"; + snps,usb3_lpm_capable; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 1>; + maximum-speed = "super-speed"; +}; + +&sdhci1 { /* on CC with tuned parameters */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci1_default>; + /* + * SD 3.0 requires level shifter and this property + * should be removed if the board has level shifter and + * need to work in UHS mode + */ + no-1-8-v; + disable-wp; + xlnx,mio-bank = <1>; +}; - fragment3 { - target = <&sata>; - __overlay__ { - status = "okay"; - /* SATA OOB timing settings */ - ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; - ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; - ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; - ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; - ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; - ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; - ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; - ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; - phy-names = "sata-phy"; - phys = <&psgtr 3 PHY_TYPE_SATA 1 2>; +&gem3 { /* required by spec */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem3_default>; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>; + reset-delay-us = <2>; + + phy0: ethernet-phy@1 { + #phy-cells = <1>; + reg = <1>; + ti,rx-internal-delay = ; + ti,tx-internal-delay = ; + ti,fifo-depth = ; + ti,dp83867-rxctrl-strap-quirk; }; }; +}; - fragment4 { - target = <&zynqmp_dpsub>; - __overlay__ { - status = "disabled"; - phy-names = "dp-phy0", "dp-phy1"; - phys = <&psgtr 1 PHY_TYPE_DP 0 0>, <&psgtr 0 PHY_TYPE_DP 1 0>; +&pinctrl0 { /* required by spec */ + status = "okay"; + + pinctrl_uart1_default: uart1-default { + conf { + groups = "uart1_9_grp"; + slew-rate = ; + power-source = ; + drive-strength = <12>; }; - }; - fragment9 { - target = <&zynqmp_dpdma>; - __overlay__ { - status = "okay"; + conf-rx { + pins = "MIO37"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO36"; + bias-disable; }; - }; - fragment10 { - target = <&usb0>; - __overlay__ { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb0_default>; - usbhub: usb5744 { /* u43 */ - compatible = "microchip,usb5744"; - reset-gpios = <&gpio 44 GPIO_ACTIVE_HIGH>; - }; + mux { + groups = "uart1_9_grp"; + function = "uart1"; }; }; - fragment11 { - target = <&dwc3_0>; - __overlay__ { - status = "okay"; - dr_mode = "host"; - snps,usb3_lpm_capable; - phy-names = "usb3-phy"; - phys = <&psgtr 2 PHY_TYPE_USB3 0 1>; - maximum-speed = "super-speed"; + pinctrl_i2c1_default: i2c1-default { + conf { + groups = "i2c1_6_grp"; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + + mux { + groups = "i2c1_6_grp"; + function = "i2c1"; }; }; - fragment12 { - target = <&sdhci1>; /* on CC with tuned parameters */ - __overlay__ { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sdhci1_default>; - /* - * SD 3.0 requires level shifter and this property - * should be removed if the board has level shifter and - * need to work in UHS mode - */ - no-1-8-v; - disable-wp; - xlnx,mio-bank = <1>; + pinctrl_i2c1_gpio: i2c1-gpio { + conf { + groups = "gpio0_24_grp", "gpio0_25_grp"; + slew-rate = ; + power-source = ; + }; + + mux { + groups = "gpio0_24_grp", "gpio0_25_grp"; + function = "gpio0"; }; }; - fragment13 { - target = <&gem3>; /* required by spec */ - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gem3_default>; - phy-handle = <&phy0>; - phy-mode = "rgmii-id"; - - mdio: mdio { - #address-cells = <1>; - #size-cells = <0>; - reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>; - reset-delay-us = <2>; - - phy0: ethernet-phy@1 { - #phy-cells = <1>; - reg = <1>; - ti,rx-internal-delay = ; - ti,tx-internal-delay = ; - ti,fifo-depth = ; - ti,dp83867-rxctrl-strap-quirk; - }; - }; + pinctrl_gem3_default: gem3-default { + conf { + groups = "ethernet3_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO70", "MIO72", "MIO74"; + bias-high-impedance; + low-power-disable; + }; + + conf-bootstrap { + pins = "MIO71", "MIO73", "MIO75"; + bias-disable; + low-power-disable; + }; + + conf-tx { + pins = "MIO64", "MIO65", "MIO66", + "MIO67", "MIO68", "MIO69"; + bias-disable; + low-power-enable; + }; + + conf-mdio { + groups = "mdio3_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + + mux-mdio { + function = "mdio3"; + groups = "mdio3_0_grp"; + }; + + mux { + function = "ethernet3"; + groups = "ethernet3_0_grp"; }; }; - fragment14 { - target = <&pinctrl0>; /* required by spec */ - __overlay__ { - status = "okay"; - - pinctrl_uart1_default: uart1-default { - conf { - groups = "uart1_9_grp"; - slew-rate = ; - power-source = ; - drive-strength = <12>; - }; - - conf-rx { - pins = "MIO37"; - bias-high-impedance; - }; - - conf-tx { - pins = "MIO36"; - bias-disable; - }; - - mux { - groups = "uart1_9_grp"; - function = "uart1"; - }; - }; - - pinctrl_i2c1_default: i2c1-default { - conf { - groups = "i2c1_6_grp"; - bias-pull-up; - slew-rate = ; - power-source = ; - }; - - mux { - groups = "i2c1_6_grp"; - function = "i2c1"; - }; - }; - - pinctrl_i2c1_gpio: i2c1-gpio { - conf { - groups = "gpio0_24_grp", "gpio0_25_grp"; - slew-rate = ; - power-source = ; - }; - - mux { - groups = "gpio0_24_grp", "gpio0_25_grp"; - function = "gpio0"; - }; - }; - - pinctrl_gem3_default: gem3-default { - conf { - groups = "ethernet3_0_grp"; - slew-rate = ; - power-source = ; - }; - - conf-rx { - pins = "MIO70", "MIO72", "MIO74"; - bias-high-impedance; - low-power-disable; - }; - - conf-bootstrap { - pins = "MIO71", "MIO73", "MIO75"; - bias-disable; - low-power-disable; - }; - - conf-tx { - pins = "MIO64", "MIO65", "MIO66", - "MIO67", "MIO68", "MIO69"; - bias-disable; - low-power-enable; - }; - - conf-mdio { - groups = "mdio3_0_grp"; - slew-rate = ; - power-source = ; - bias-disable; - }; - - mux-mdio { - function = "mdio3"; - groups = "mdio3_0_grp"; - }; - - mux { - function = "ethernet3"; - groups = "ethernet3_0_grp"; - }; - }; - - pinctrl_usb0_default: usb0-default { - conf { - groups = "usb0_0_grp"; - slew-rate = ; - power-source = ; - }; - - conf-rx { - pins = "MIO52", "MIO53", "MIO55"; - bias-high-impedance; - }; - - conf-tx { - pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", - "MIO60", "MIO61", "MIO62", "MIO63"; - bias-disable; - }; - - mux { - groups = "usb0_0_grp"; - function = "usb0"; - }; - }; - - pinctrl_sdhci1_default: sdhci1-default { - conf { - groups = "sdio1_0_grp"; - slew-rate = ; - power-source = ; - bias-disable; - }; - - conf-cd { - groups = "sdio1_cd_0_grp"; - bias-high-impedance; - bias-pull-up; - slew-rate = ; - power-source = ; - }; - - mux-cd { - groups = "sdio1_cd_0_grp"; - function = "sdio1_cd"; - }; - - mux { - groups = "sdio1_0_grp"; - function = "sdio1"; - }; - }; + pinctrl_usb0_default: usb0-default { + conf { + groups = "usb0_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO52", "MIO53", "MIO55"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", + "MIO60", "MIO61", "MIO62", "MIO63"; + bias-disable; + }; + + mux { + groups = "usb0_0_grp"; + function = "usb0"; }; }; - fragment15 { - target = <&uart1>; - __overlay__ { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1_default>; + + pinctrl_sdhci1_default: sdhci1-default { + conf { + groups = "sdio1_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + + conf-cd { + groups = "sdio1_cd_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + + mux-cd { + groups = "sdio1_cd_0_grp"; + function = "sdio1_cd"; + }; + + mux { + groups = "sdio1_0_grp"; + function = "sdio1"; }; }; }; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; +}; diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revB.dts b/arch/arm/dts/zynqmp-sck-kv-g-revB.dts index 1393f997a0..d004ad1439 100644 --- a/arch/arm/dts/zynqmp-sck-kv-g-revB.dts +++ b/arch/arm/dts/zynqmp-sck-kv-g-revB.dts @@ -15,339 +15,304 @@ /dts-v1/; /plugin/; -/{ +&{/} { compatible = "xlnx,zynqmp-sk-kv260-rev1", "xlnx,zynqmp-sk-kv260-revB", "xlnx,zynqmp-sk-kv260", "xlnx,zynqmp"; +}; - fragment1 { - target = <&i2c1>; /* I2C_SCK C23/C24 - MIO from SOM */ - - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default", "gpio"; - pinctrl-0 = <&pinctrl_i2c1_default>; - pinctrl-1 = <&pinctrl_i2c1_gpio>; - scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; - sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; - - u14: ina260@40 { /* u14 */ - compatible = "ti,ina260"; - #io-channel-cells = <1>; - label = "ina260-u14"; - reg = <0x40>; - }; - usbhub: usb5744@2d { /* u43 */ - compatible = "microchip,usb5744"; - reg = <0x2d>; - reset-gpios = <&gpio 44 GPIO_ACTIVE_HIGH>; - }; - /* u27 - 0xe0 - STDP4320 DP/HDMI splitter */ - }; +&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; + + u14: ina260@40 { /* u14 */ + compatible = "ti,ina260"; + #io-channel-cells = <1>; + label = "ina260-u14"; + reg = <0x40>; + }; + usbhub: usb5744@2d { /* u43 */ + compatible = "microchip,usb5744"; + reg = <0x2d>; + reset-gpios = <&gpio 44 GPIO_ACTIVE_HIGH>; }; + /* u27 - 0xe0 - STDP4320 DP/HDMI splitter */ +}; - fragment1a { - target = <&amba>; - __overlay__ { - ina260-u14 { - compatible = "iio-hwmon"; - io-channels = <&u14 0>, <&u14 1>, <&u14 2>; - }; - - si5332_0: si5332_0 { /* u17 */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - }; - - si5332_1: si5332_1 { /* u17 */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - si5332_2: si5332_2 { /* u17 */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <48000000>; - }; - - si5332_3: si5332_3 { /* u17 */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; - }; - - si5332_4: si5332_4 { /* u17 */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <26000000>; - }; - - si5332_5: si5332_5 { /* u17 */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <27000000>; - }; - }; +&amba { + ina260-u14 { + compatible = "iio-hwmon"; + io-channels = <&u14 0>, <&u14 1>, <&u14 2>; + }; + + si5332_0: si5332_0 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + si5332_1: si5332_1 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + si5332_2: si5332_2 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; + + si5332_3: si5332_3 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + si5332_4: si5332_4 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + si5332_5: si5332_5 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; }; +}; /* DP/USB 3.0 */ - fragment2 { - target = <&psgtr>; - __overlay__ { - status = "okay"; - /* pcie, usb3, sata */ - clocks = <&si5332_5>, <&si5332_4>, <&si5332_0>; - clock-names = "ref0", "ref1", "ref2"; +&psgtr { + status = "okay"; + /* pcie, usb3, sata */ + clocks = <&si5332_5>, <&si5332_4>, <&si5332_0>; + clock-names = "ref0", "ref1", "ref2"; +}; + +&zynqmp_dpsub { + status = "disabled"; + phy-names = "dp-phy0", "dp-phy1"; + phys = <&psgtr 1 PHY_TYPE_DP 0 0>, <&psgtr 0 PHY_TYPE_DP 1 0>; +}; + +&zynqmp_dpdma { + status = "okay"; +}; + +&usb0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; +}; + +&dwc3_0 { + status = "okay"; + dr_mode = "host"; + snps,usb3_lpm_capable; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 1>; + maximum-speed = "super-speed"; +}; + +&sdhci1 { /* on CC with tuned parameters */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci1_default>; + /* + * SD 3.0 requires level shifter and this property + * should be removed if the board has level shifter and + * need to work in UHS mode + */ + no-1-8-v; + disable-wp; + xlnx,mio-bank = <1>; + clk-phase-sd-hs = <126>, <60>; + clk-phase-uhs-sdr25 = <120>, <60>; + clk-phase-uhs-ddr50 = <126>, <48>; +}; + +&gem3 { /* required by spec */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem3_default>; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>; + reset-delay-us = <2>; + + phy0: ethernet-phy@1 { + #phy-cells = <1>; + reg = <1>; + ti,rx-internal-delay = ; + ti,tx-internal-delay = ; + ti,fifo-depth = ; + ti,dp83867-rxctrl-strap-quirk; }; }; +}; + +&pinctrl0 { /* required by spec */ + status = "okay"; - fragment4 { - target = <&zynqmp_dpsub>; - __overlay__ { - status = "disabled"; - phy-names = "dp-phy0", "dp-phy1"; - phys = <&psgtr 1 PHY_TYPE_DP 0 0>, <&psgtr 0 PHY_TYPE_DP 1 0>; + pinctrl_uart1_default: uart1-default { + conf { + groups = "uart1_9_grp"; + slew-rate = ; + power-source = ; + drive-strength = <12>; }; - }; - fragment9 { - target = <&zynqmp_dpdma>; - __overlay__ { - status = "okay"; + conf-rx { + pins = "MIO37"; + bias-high-impedance; }; - }; - fragment10 { - target = <&usb0>; - __overlay__ { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb0_default>; + conf-tx { + pins = "MIO36"; + bias-disable; + }; + + mux { + groups = "uart1_9_grp"; + function = "uart1"; }; }; - fragment11 { - target = <&dwc3_0>; - __overlay__ { - status = "okay"; - dr_mode = "host"; - snps,usb3_lpm_capable; - phy-names = "usb3-phy"; - phys = <&psgtr 2 PHY_TYPE_USB3 0 1>; - maximum-speed = "super-speed"; + pinctrl_i2c1_default: i2c1-default { + conf { + groups = "i2c1_6_grp"; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + + mux { + groups = "i2c1_6_grp"; + function = "i2c1"; }; }; - fragment12 { - target = <&sdhci1>; /* on CC with tuned parameters */ - __overlay__ { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sdhci1_default>; - /* - * SD 3.0 requires level shifter and this property - * should be removed if the board has level shifter and - * need to work in UHS mode - */ - no-1-8-v; - disable-wp; - xlnx,mio-bank = <1>; - clk-phase-sd-hs = <126>, <60>; - clk-phase-uhs-sdr25 = <120>, <60>; - clk-phase-uhs-ddr50 = <126>, <48>; + pinctrl_i2c1_gpio: i2c1-gpio { + conf { + groups = "gpio0_24_grp", "gpio0_25_grp"; + slew-rate = ; + power-source = ; + }; + + mux { + groups = "gpio0_24_grp", "gpio0_25_grp"; + function = "gpio0"; }; }; - fragment13 { - target = <&gem3>; /* required by spec */ - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gem3_default>; - phy-handle = <&phy0>; - phy-mode = "rgmii-id"; - - mdio: mdio { - #address-cells = <1>; - #size-cells = <0>; - reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>; - reset-delay-us = <2>; - - phy0: ethernet-phy@1 { - #phy-cells = <1>; - reg = <1>; - ti,rx-internal-delay = ; - ti,tx-internal-delay = ; - ti,fifo-depth = ; - ti,dp83867-rxctrl-strap-quirk; - }; - }; + pinctrl_gem3_default: gem3-default { + conf { + groups = "ethernet3_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO70", "MIO72", "MIO74"; + bias-high-impedance; + low-power-disable; + }; + + conf-bootstrap { + pins = "MIO71", "MIO73", "MIO75"; + bias-disable; + low-power-disable; + }; + + conf-tx { + pins = "MIO64", "MIO65", "MIO66", + "MIO67", "MIO68", "MIO69"; + bias-disable; + low-power-enable; + }; + + conf-mdio { + groups = "mdio3_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + + mux-mdio { + function = "mdio3"; + groups = "mdio3_0_grp"; + }; + + mux { + function = "ethernet3"; + groups = "ethernet3_0_grp"; }; }; - fragment14 { - target = <&pinctrl0>; /* required by spec */ - __overlay__ { - status = "okay"; - - pinctrl_uart1_default: uart1-default { - conf { - groups = "uart1_9_grp"; - slew-rate = ; - power-source = ; - drive-strength = <12>; - }; - - conf-rx { - pins = "MIO37"; - bias-high-impedance; - }; - - conf-tx { - pins = "MIO36"; - bias-disable; - }; - - mux { - groups = "uart1_9_grp"; - function = "uart1"; - }; - }; - - pinctrl_i2c1_default: i2c1-default { - conf { - groups = "i2c1_6_grp"; - bias-pull-up; - slew-rate = ; - power-source = ; - }; - - mux { - groups = "i2c1_6_grp"; - function = "i2c1"; - }; - }; - - pinctrl_i2c1_gpio: i2c1-gpio { - conf { - groups = "gpio0_24_grp", "gpio0_25_grp"; - slew-rate = ; - power-source = ; - }; - - mux { - groups = "gpio0_24_grp", "gpio0_25_grp"; - function = "gpio0"; - }; - }; - - pinctrl_gem3_default: gem3-default { - conf { - groups = "ethernet3_0_grp"; - slew-rate = ; - power-source = ; - }; - - conf-rx { - pins = "MIO70", "MIO72", "MIO74"; - bias-high-impedance; - low-power-disable; - }; - - conf-bootstrap { - pins = "MIO71", "MIO73", "MIO75"; - bias-disable; - low-power-disable; - }; - - conf-tx { - pins = "MIO64", "MIO65", "MIO66", - "MIO67", "MIO68", "MIO69"; - bias-disable; - low-power-enable; - }; - - conf-mdio { - groups = "mdio3_0_grp"; - slew-rate = ; - power-source = ; - bias-disable; - }; - - mux-mdio { - function = "mdio3"; - groups = "mdio3_0_grp"; - }; - - mux { - function = "ethernet3"; - groups = "ethernet3_0_grp"; - }; - }; - - pinctrl_usb0_default: usb0-default { - conf { - groups = "usb0_0_grp"; - slew-rate = ; - power-source = ; - }; - - conf-rx { - pins = "MIO52", "MIO53", "MIO55"; - bias-high-impedance; - }; - - conf-tx { - pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", - "MIO60", "MIO61", "MIO62", "MIO63"; - bias-disable; - }; - - mux { - groups = "usb0_0_grp"; - function = "usb0"; - }; - }; - - pinctrl_sdhci1_default: sdhci1-default { - conf { - groups = "sdio1_0_grp"; - slew-rate = ; - power-source = ; - bias-disable; - }; - - conf-cd { - groups = "sdio1_cd_0_grp"; - bias-high-impedance; - bias-pull-up; - slew-rate = ; - power-source = ; - }; - - mux-cd { - groups = "sdio1_cd_0_grp"; - function = "sdio1_cd"; - }; - - mux { - groups = "sdio1_0_grp"; - function = "sdio1"; - }; - }; + pinctrl_usb0_default: usb0-default { + conf { + groups = "usb0_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO52", "MIO53", "MIO55"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", + "MIO60", "MIO61", "MIO62", "MIO63"; + bias-disable; + }; + + mux { + groups = "usb0_0_grp"; + function = "usb0"; }; }; - fragment15 { - target = <&uart1>; - __overlay__ { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1_default>; + + pinctrl_sdhci1_default: sdhci1-default { + conf { + groups = "sdio1_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + + conf-cd { + groups = "sdio1_cd_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + + mux-cd { + groups = "sdio1_cd_0_grp"; + function = "sdio1_cd"; + }; + + mux { + groups = "sdio1_0_grp"; + function = "sdio1"; }; }; }; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; +}; -- 2.39.5