From b15e7c172709c0bbf10d8a229986581660d2b75f Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Sat, 12 Nov 2016 21:43:37 -0600 Subject: [PATCH] ARM: OMAP3_LOGIC: Fix SPL Memory Map for Falcon Mode The memory map defined in commit ("49c7303f0e52: OMAP3: Enable SPL on omap3_logic) was used by a copy-paste of another board without fully understanding how the map works in Falcon mode. This patch undoes the customization and uses the default SPL Memory Map for OMAP3. When building the uImage, set LOADADDR=0x82000000 and Falcon mode should properly load. Signed-off-by: Adam Ford Reviewed-by: Tom Rini --- include/configs/omap3_logic.h | 13 ------------- 1 file changed, 13 deletions(-) diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index 0827ebedfd..301d4b2002 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -15,19 +15,6 @@ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ -/* - * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM - * 64 bytes before this address should be set aside for u-boot.img's - * header. That is 0x800FFFC0--0x80100000 should not be used for any - * other needs. We use this rather than the inherited defines from - * ti_armv7_common.h for backwards compatibility. - */ -#define CONFIG_SYS_TEXT_BASE 0x80100000 -#define CONFIG_SPL_BSS_START_ADDR 0x80000000 -#define CONFIG_SPL_BSS_MAX_SIZE (512 << 10) /* 512 KB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x80208000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 - #include /* -- 2.39.5