From af95a3e7c03e1538f43ca843f7282f36ce0488b8 Mon Sep 17 00:00:00 2001 From: Heinrich Schuchardt Date: Sun, 8 Jul 2018 00:07:26 +0200 Subject: [PATCH] drivers: rtc: correct week day for mc146818 For qemu-x86 the date command produces wrong days of the week: Date: 2018-07-06 (Saturday) Time: 18:02:03 Date: 2018-07-07 (unknown day) Time: 21:02:06 According to a comment in the Linux driver the mc146818 only updates the day of the week if the register value is non-zero. Sunday is 1, saturday is 7 unlike in U-Boot (see data sheet https://www.nxp.com/docs/en/data-sheet/MC146818.pdf). So let's use our library function to determine the day of the week. Signed-off-by: Heinrich Schuchardt --- drivers/rtc/mc146818.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/rtc/mc146818.c b/drivers/rtc/mc146818.c index 500eef2ee0..ee29c711aa 100644 --- a/drivers/rtc/mc146818.c +++ b/drivers/rtc/mc146818.c @@ -83,7 +83,7 @@ static void mc146818_write8(int reg, uchar val) static int mc146818_get(struct rtc_time *tmp) { - uchar sec, min, hour, mday, wday, mon, year; + uchar sec, min, hour, mday, wday __attribute__((unused)),mon, year; /* here check if rtc can be accessed */ while ((mc146818_read8(RTC_CONFIG_A) & 0x80) == 0x80) @@ -111,7 +111,6 @@ static int mc146818_get(struct rtc_time *tmp) tmp->tm_mday = bcd2bin(mday & 0x3f); tmp->tm_mon = bcd2bin(mon & 0x1f); tmp->tm_year = bcd2bin(year); - tmp->tm_wday = bcd2bin(wday & 0x07); if (tmp->tm_year < 70) tmp->tm_year += 2000; @@ -120,6 +119,11 @@ static int mc146818_get(struct rtc_time *tmp) tmp->tm_yday = 0; tmp->tm_isdst = 0; + /* + * The mc146818 only updates wday if it is non-zero, sunday is 1 + * saturday is 7. So let's use our library routine. + */ + rtc_calc_weekday(tmp); #ifdef RTC_DEBUG printf("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, -- 2.39.5