From a51fdba3fa1e18f5b3b294663949723f220576ba Mon Sep 17 00:00:00 2001 From: Igor Opaniuk Date: Thu, 22 Oct 2020 11:21:38 +0300 Subject: [PATCH] board: toradex: add apalis-imx8x 2gb wb it v1.1a module support This commit adds initial support for the Toradex Apalis iMX8X 2GB WB IT V1.1A System on Module support [1]. Boot log: U-Boot 2020.10-02940-g894aebb7e8-dirty (Oct 22 2020 - 09:43:57 +0300) CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 30C DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK In: serial@5a070000 Out: serial@5a070000 Err: serial@5a070000 Model: Toradex Apalis iMX8 QuadXPlus 2GB Wi-Fi / BT IT V1.1A, Serial# 06617018 Net: eth0: ethernet@5b040000 [PRIME] Hit any key to stop autoboot: 0 Functionality wise the following is known to be working: - eMMC and MMC/SD card - Ethernet (*) - GPIOs - I2C Unfortunately, there is no USB functionality for the i.MX 8QXP as of yet. * With the SCU FW from the latest Toradex BSP 5.0.0 (SCU FW 1.5.1) ETH PHY encounters bring up problems after reset, this will be fixed soon on SCU FW side. [1] https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-imx-8x Signed-off-by: Igor Opaniuk Acked-by: Oleksandr Suvorov --- arch/arm/mach-imx/imx8/Kconfig | 6 + board/toradex/apalis-imx8x/Kconfig | 30 ++++ board/toradex/apalis-imx8x/MAINTAINERS | 10 ++ board/toradex/apalis-imx8x/Makefile | 6 + .../apalis-imx8x/apalis-imx8x-imximage.cfg | 24 +++ board/toradex/apalis-imx8x/apalis-imx8x.c | 131 +++++++++++++++ configs/apalis-imx8x_defconfig | 77 +++++++++ include/configs/apalis-imx8x.h | 149 ++++++++++++++++++ 8 files changed, 433 insertions(+) create mode 100644 board/toradex/apalis-imx8x/Kconfig create mode 100644 board/toradex/apalis-imx8x/MAINTAINERS create mode 100644 board/toradex/apalis-imx8x/Makefile create mode 100644 board/toradex/apalis-imx8x/apalis-imx8x-imximage.cfg create mode 100644 board/toradex/apalis-imx8x/apalis-imx8x.c create mode 100644 configs/apalis-imx8x_defconfig create mode 100644 include/configs/apalis-imx8x.h diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig index 9d1f73dfc7..04b9729109 100644 --- a/arch/arm/mach-imx/imx8/Kconfig +++ b/arch/arm/mach-imx/imx8/Kconfig @@ -65,6 +65,11 @@ config TARGET_COLIBRI_IMX8X select BOARD_LATE_INIT select IMX8QXP +config TARGET_APALIS_IMX8X + bool "Support Apalis iMX8X module" + select BOARD_LATE_INIT + select IMX8QXP + config TARGET_DENEB bool "Support i.MX8QXP Capricorn Deneb board" select BOARD_LATE_INIT @@ -98,6 +103,7 @@ source "board/freescale/imx8qxp_mek/Kconfig" source "board/advantech/imx8qm_rom7720_a1/Kconfig" source "board/toradex/apalis-imx8/Kconfig" source "board/toradex/colibri-imx8x/Kconfig" +source "board/toradex/apalis-imx8x/Kconfig" source "board/siemens/capricorn/Kconfig" config IMX_SNVS_SEC_SC diff --git a/board/toradex/apalis-imx8x/Kconfig b/board/toradex/apalis-imx8x/Kconfig new file mode 100644 index 0000000000..ee61e09736 --- /dev/null +++ b/board/toradex/apalis-imx8x/Kconfig @@ -0,0 +1,30 @@ +if TARGET_APALIS_IMX8X + +config SYS_BOARD + default "apalis-imx8x" + +config SYS_VENDOR + default "toradex" + +config SYS_CONFIG_NAME + default "apalis-imx8x" + +config TDX_CFG_BLOCK + default y + +config TDX_HAVE_MMC + default y + +config TDX_CFG_BLOCK_DEV + default "0" + +config TDX_CFG_BLOCK_PART + default "1" + +# Toradex config block in eMMC, at the end of 1st "boot sector" +config TDX_CFG_BLOCK_OFFSET + default "-512" + +source "board/toradex/common/Kconfig" + +endif diff --git a/board/toradex/apalis-imx8x/MAINTAINERS b/board/toradex/apalis-imx8x/MAINTAINERS new file mode 100644 index 0000000000..fbf9379931 --- /dev/null +++ b/board/toradex/apalis-imx8x/MAINTAINERS @@ -0,0 +1,10 @@ +Apalis iMX8X +M: Igor Opaniuk +W: http://developer.toradex.com/software/linux/linux-software +S: Maintained +F: arch/arm/dts/fsl-imx8x-apalis.dts +F: arch/arm/dts/fsl-imx8x-apalis-u-boot.dtsi +F: board/toradex/apalis-imx8x/ +F: configs/apalis-imx8x_defconfig +F: doc/board/toradex/apalis-imx8x.rst +F: include/configs/apalis-imx8x.h diff --git a/board/toradex/apalis-imx8x/Makefile b/board/toradex/apalis-imx8x/Makefile new file mode 100644 index 0000000000..9d6e85b742 --- /dev/null +++ b/board/toradex/apalis-imx8x/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright 2020 Toradex +# + +obj-y += apalis-imx8x.o diff --git a/board/toradex/apalis-imx8x/apalis-imx8x-imximage.cfg b/board/toradex/apalis-imx8x/apalis-imx8x-imximage.cfg new file mode 100644 index 0000000000..58c62d0a65 --- /dev/null +++ b/board/toradex/apalis-imx8x/apalis-imx8x-imximage.cfg @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2020 Toradex + * + * Refer doc/imx/mkimage/imx8image.txt for more details about how-to configure + * and create imx8image boot image + */ + +#define __ASSEMBLY__ + +/* Boot from SD, sector size 0x400 */ +BOOT_FROM EMMC_FASTBOOT 0x400 +/* SoC type IMX8QX */ +SOC_TYPE IMX8QX +/* Append seco container image */ +APPEND mx8qx-ahab-container.img +/* Create the 2nd container */ +CONTAINER +/* Add scfw image with exec attribute */ +IMAGE SCU mx8qx-apalis-scfw-tcm.bin +/* Add ATF image with exec attribute */ +IMAGE A35 bl31.bin 0x80000000 +/* Add U-Boot image with load attribute */ +DATA A35 u-boot-dtb.bin 0x80020000 diff --git a/board/toradex/apalis-imx8x/apalis-imx8x.c b/board/toradex/apalis-imx8x/apalis-imx8x.c new file mode 100644 index 0000000000..9f00f26cfe --- /dev/null +++ b/board/toradex/apalis-imx8x/apalis-imx8x.c @@ -0,0 +1,131 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2020 Toradex + */ + +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "../common/tdx-cfg-block.h" + +DECLARE_GLOBAL_DATA_PTR; + +#define UART_PAD_CTRL ((SC_PAD_CONFIG_OUT_IN << PADRING_CONFIG_SHIFT) | \ + (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \ + (SC_PAD_28FDSOI_DSE_DV_HIGH << PADRING_DSE_SHIFT) | \ + (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT)) + +static iomux_cfg_t uart1_pads[] = { + SC_P_UART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL), + SC_P_UART1_TX | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +static void setup_iomux_uart(void) +{ + imx8_iomux_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); +} + +int board_early_init_f(void) +{ + sc_pm_clock_rate_t rate; + sc_err_t err = 0; + + /* + * This works around that having only UART3 up the baudrate is 1.2M + * instead of 115.2k. Set UART0 clock root to 80 MHz + */ + rate = 80000000; + err = sc_pm_set_clock_rate(-1, SC_R_UART_0, SC_PM_CLK_PER, &rate); + if (err != SC_ERR_NONE) + return 0; + + /* Set UART3 clock root to 80 MHz and enable it */ + rate = SC_80MHZ; + err = sc_pm_setup_uart(SC_R_UART_1, rate); + if (err != SC_ERR_NONE) + return 0; + + setup_iomux_uart(); + + return 0; +} + +#if IS_ENABLED(CONFIG_DM_GPIO) +static void board_gpio_init(void) +{ + /* TODO */ +} +#else +static inline void board_gpio_init(void) {} +#endif + +#if IS_ENABLED(CONFIG_FEC_MXC) +#include + +int board_phy_config(struct phy_device *phydev) +{ + if (phydev->drv->config) + phydev->drv->config(phydev); + + return 0; +} +#endif + +int checkboard(void) +{ + puts("Model: Toradex Apalis iMX8X\n"); + + build_info(); + print_bootinfo(); + + return 0; +} + +int board_init(void) +{ + board_gpio_init(); + + return 0; +} + +/* + * Board specific reset that is system reset. + */ +void reset_cpu(ulong addr) +{ + /* TODO */ +} + +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +int ft_board_setup(void *blob, struct bd_info *bd) +{ + return ft_common_board_setup(blob, bd); +} +#endif + +int board_mmc_get_env_dev(int devno) +{ + return devno; +} + +int board_late_init(void) +{ +#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG +/* TODO move to common */ + env_set("board_name", "Apalis iMX8X"); +#endif + + return 0; +} diff --git a/configs/apalis-imx8x_defconfig b/configs/apalis-imx8x_defconfig new file mode 100644 index 0000000000..e6aa575380 --- /dev/null +++ b/configs/apalis-imx8x_defconfig @@ -0,0 +1,77 @@ +CONFIG_ARM=y +CONFIG_ARCH_IMX8=y +CONFIG_SYS_TEXT_BASE=0x80020000 +CONFIG_SYS_MALLOC_F_LEN=0x4000 +CONFIG_NR_DRAM_BANKS=3 +CONFIG_ENV_SIZE=0x2000 +CONFIG_ENV_OFFSET=0xFFFFDE00 +CONFIG_DM_GPIO=y +CONFIG_TARGET_APALIS_IMX8X=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8qxp-apalis" +CONFIG_DISTRO_DEFAULTS=y +CONFIG_FIT=y +CONFIG_OF_SYSTEM_SETUP=y +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/apalis-imx8x/apalis-imx8x-imximage.cfg" +CONFIG_BOOTDELAY=1 +CONFIG_LOG=y +# CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SYS_PROMPT="Apalis iMX8X # " +CONFIG_CMD_CPU=y +# CONFIG_BOOTM_NETBSD is not set +CONFIG_CMD_ASKENV=y +CONFIG_CMD_MEMTEST=y +CONFIG_SYS_MEMTEST_START=0x88000000 +CONFIG_SYS_MEMTEST_END=0x89000000 +CONFIG_CMD_CLK=y +CONFIG_CMD_DM=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_UUID=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_MMC=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_SYS_MMC_ENV_PART=1 +CONFIG_VERSION_VARIABLE=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_IP_DEFRAG=y +CONFIG_TFTP_BLOCKSIZE=4096 +CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_BOOTCOUNT_ENV=y +CONFIG_CLK_IMX8=y +CONFIG_CPU=y +CONFIG_MXC_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_IMX_LPI2C=y +CONFIG_I2C_MUX=y +CONFIG_I2C_MUX_PCA954x=y +CONFIG_MISC=y +CONFIG_DM_MMC=y +CONFIG_FSL_USDHC=y +CONFIG_PHYLIB=y +CONFIG_PHY_ADDR_ENABLE=y +CONFIG_PHY_MICREL=y +CONFIG_PHY_MICREL_KSZ90X1=y +CONFIG_DM_ETH=y +CONFIG_FEC_MXC_SHARE_MDIO=y +CONFIG_FEC_MXC_MDIO_BASE=0x5B040000 +CONFIG_FEC_MXC=y +CONFIG_MII=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX8=y +CONFIG_POWER_DOMAIN=y +CONFIG_IMX8_POWER_DOMAIN=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DM_SERIAL=y +CONFIG_FSL_LPUART=y +CONFIG_DM_THERMAL=y +CONFIG_IMX_SCU_THERMAL=y +# CONFIG_EFI_LOADER is not set diff --git a/include/configs/apalis-imx8x.h b/include/configs/apalis-imx8x.h new file mode 100644 index 0000000000..db31c210f5 --- /dev/null +++ b/include/configs/apalis-imx8x.h @@ -0,0 +1,149 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2020 Toradex + */ + +#ifndef __APALIS_IMX8X_H +#define __APALIS_IMX8X_H + +#include +#include +#include + +#define CONFIG_REMAKE_ELF + +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define USDHC1_BASE_ADDR 0x5b010000 +#define USDHC2_BASE_ADDR 0x5b020000 +#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ + +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + +#define CONFIG_TFTP_TSIZE + +#define CONFIG_IPADDR 192.168.10.2 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_SERVERIP 192.168.10.1 + +#define FEC_ENET_ENABLE_TXC_DELAY +#define FEC_ENET_ENABLE_RXC_DELAY + +#define MEM_LAYOUT_ENV_SETTINGS \ + "kernel_addr_r=0x80280000\0" \ + "fdt_addr_r=0x83100000\0" \ + "ramdisk_addr_r=0x8a000000\0" \ + "scriptaddr=0x83200000\0" + +#ifdef CONFIG_AHAB_BOOT +#define AHAB_ENV "sec_boot=yes\0" +#else +#define AHAB_ENV "sec_boot=no\0" +#endif + +/* Boot M4 */ +#define M4_BOOT_ENV \ + "m4_0_image=m4_0.bin\0" \ + "loadm4image_0=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} " \ + "${m4_0_image}\0" \ + "m4boot_0=run loadm4image_0; dcache flush; bootaux ${loadaddr} 0\0" \ + +#define MFG_NAND_PARTITION "" + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 1) \ + func(MMC, mmc, 0) \ + func(DHCP, dhcp, na) +#include +#undef BOOTENV_RUN_NET_USB_START +#define BOOTENV_RUN_NET_USB_START "" + +#define CONFIG_MFG_ENV_SETTINGS \ + "mfgtool_args=setenv bootargs ${consoleargs} " \ + "rdinit=/linuxrc g_mass_storage.stall=0 " \ + "g_mass_storage.removable=1 g_mass_storage.idVendor=0x066F " \ + "g_mass_storage.idProduct=0x37FF " \ + "g_mass_storage.iSerialNumber=\"\" " MFG_NAND_PARTITION \ + "${vidargs} clk_ignore_unused\0" \ + "initrd_addr=0x83800000\0" \ + "bootcmd_mfg=run mfgtool_args;booti ${loadaddr} ${initrd_addr} " \ + "${fdt_addr};\0" \ + +/* Initial environment variables */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + AHAB_ENV \ + BOOTENV \ + CONFIG_MFG_ENV_SETTINGS \ + M4_BOOT_ENV \ + MEM_LAYOUT_ENV_SETTINGS \ + "boot_file=Image\0" \ + "consoleargs=console=ttyLP3,${baudrate} earlycon\0" \ + "fdt_file=imx8qxp-apalis-eval.dtb\0" \ + "fdtfile=imx8qxp-apalis-eval.dtb\0" \ + "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \ + "image=Image\0" \ + "initrd_addr=0x83800000\0" \ + "mmcargs=setenv bootargs ${consoleargs} " \ + "root=PARTUUID=${uuid} rootwait " \ + "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ + "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "netargs=setenv bootargs ${consoleargs} " \ + "root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp " \ + "${vidargs}\0" \ + "nfsboot=run netargs; dhcp ${loadaddr} ${image}; tftp ${fdt_addr} " \ + "apalis-imx8x/${fdt_file}; booti ${loadaddr} - " \ + "${fdt_addr}\0" \ + "panel=NULL\0" \ + "script=boot.scr\0" \ + "update_uboot=askenv confirm Did you load u-boot-dtb.imx (y/N)?; " \ + "if test \"$confirm\" = \"y\"; then " \ + "setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \ + "${blkcnt} / 0x200; mmc dev 0 1; mmc write ${loadaddr} 0x0 " \ + "${blkcnt}; fi\0" \ + "vidargs=video=imxdpufb5:off video=imxdpufb6:off video=imxdpufb7:off\0" + +/* Link Definitions */ +#define CONFIG_LOADADDR 0x89000000 + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define CONFIG_SYS_INIT_SP_ADDR 0x80200000 + +/* Environment in eMMC, before config block at the end of 1st "boot sector" */ + +#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 + +/* On Apalis iMX8X USDHC1 is eMMC, USDHC2 is 4-bit SD */ +#define CONFIG_SYS_FSL_USDHC_NUM 2 + +#define CONFIG_SYS_BOOTM_LEN SZ_64M /* Increase max gunzip size */ + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN ((CONFIG_ENV_SIZE + (32 * 1024)) * 1024) + +#define CONFIG_SYS_SDRAM_BASE 0x80000000 +#define PHYS_SDRAM_1 0x80000000 +#define PHYS_SDRAM_2 0x880000000 +#define PHYS_SDRAM_1_SIZE SZ_2G /* 2 GB */ +#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 GB */ + +/* Monitor Command Prompt */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_CBSIZE SZ_2K +#define CONFIG_SYS_MAXARGS 64 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* Generic Timer Definitions */ +#define COUNTER_FREQUENCY 8000000 /* 8MHz */ + +/* Networking */ +#define CONFIG_FEC_ENET_DEV 0 +#define IMX_FEC_BASE 0x5b040000 +#define CONFIG_FEC_MXC_PHYADDR 0x4 +#define CONFIG_ETHPRIME "eth0" +#define CONFIG_FEC_XCV_TYPE RGMII +#define FEC_QUIRK_ENET_MAC +#define PHY_ANEG_TIMEOUT 20000 + +#endif /* __APALIS_IMX8X_H */ -- 2.39.5