From a301ec7a5a165e3bfd2a33509dbd87dab0559e72 Mon Sep 17 00:00:00 2001 From: Alex Marginean Date: Thu, 14 Nov 2019 18:28:32 +0200 Subject: [PATCH] drivers: net: aquantia: set up SI protocol based on interface type If PHY is not ready for data by the time _config is called, reconfigure the PHY system interface to use the proper protocol based on phydev->interface, just in case the defaults set by PHY firmware don't match current configuration. Signed-off-by: Florin Laurentiu Chiculita Signed-off-by: Alex Marginean Acked-by: Joe Hershberger --- drivers/net/phy/aquantia.c | 107 +++++++++++++++++++++++++++++++++++++ 1 file changed, 107 insertions(+) diff --git a/drivers/net/phy/aquantia.c b/drivers/net/phy/aquantia.c index 397abc0380..d166d05d5b 100644 --- a/drivers/net/phy/aquantia.c +++ b/drivers/net/phy/aquantia.c @@ -21,6 +21,7 @@ #define AQUNTIA_SPEED_MSB_MASK 0x40 #define AQUANTIA_SYSTEM_INTERFACE_SR 0xe812 +#define AQUANTIA_SYSTEM_INTERFACE_SR_READY BIT(0) #define AQUANTIA_VENDOR_PROVISIONING_REG 0xC441 #define AQUANTIA_FIRMWARE_ID 0x20 #define AQUANTIA_RESERVED_STATUS 0xc885 @@ -33,6 +34,9 @@ #define AQUANTIA_SI_USXGMII 0x0018 /* registers in MDIO_MMD_VEND1 region */ +#define AQUANTIA_VND1_GLOBAL_SC 0x000 +#define AQUANTIA_VND1_GLOBAL_SC_LP BIT(0xb) + #define GLOBAL_FIRMWARE_ID 0x20 #define GLOBAL_FAULT 0xc850 #define GLOBAL_RSTATUS_1 0xc885 @@ -63,6 +67,26 @@ #define UP_RUN_STALL_OVERRIDE BIT(6) #define UP_RUN_STALL BIT(0) +/* + * global start rate, the protocol associated with this speed is used by default + * on SI. + */ +#define AQUANTIA_VND1_GSTART_RATE 0x31a +#define AQUANTIA_VND1_GSTART_RATE_OFF 0 +#define AQUANTIA_VND1_GSTART_RATE_100M 1 +#define AQUANTIA_VND1_GSTART_RATE_1G 2 +#define AQUANTIA_VND1_GSTART_RATE_10G 3 +#define AQUANTIA_VND1_GSTART_RATE_2_5G 4 +#define AQUANTIA_VND1_GSTART_RATE_5G 5 + +/* SYSCFG registers for 100M, 1G, 2.5G, 5G, 10G */ +#define AQUANTIA_VND1_GSYSCFG_BASE 0x31b +#define AQUANTIA_VND1_GSYSCFG_100M 0 +#define AQUANTIA_VND1_GSYSCFG_1G 1 +#define AQUANTIA_VND1_GSYSCFG_2_5G 2 +#define AQUANTIA_VND1_GSYSCFG_5G 3 +#define AQUANTIA_VND1_GSYSCFG_10G 4 + /* addresses of memory segments in the phy */ #define DRAM_BASE_ADDR 0x3FFE0000 #define IRAM_BASE_ADDR 0x40000000 @@ -263,6 +287,68 @@ static int aquantia_upload_firmware(struct phy_device *phydev) } #endif +struct { + u16 syscfg; + int cnt; + u16 start_rate; +} aquantia_syscfg[PHY_INTERFACE_MODE_COUNT] = { + [PHY_INTERFACE_MODE_SGMII] = {0x04b, AQUANTIA_VND1_GSYSCFG_1G, + AQUANTIA_VND1_GSTART_RATE_1G}, + [PHY_INTERFACE_MODE_SGMII_2500] = {0x144, AQUANTIA_VND1_GSYSCFG_2_5G, + AQUANTIA_VND1_GSTART_RATE_2_5G}, + [PHY_INTERFACE_MODE_XGMII] = {0x100, AQUANTIA_VND1_GSYSCFG_10G, + AQUANTIA_VND1_GSTART_RATE_10G}, + [PHY_INTERFACE_MODE_XFI] = {0x100, AQUANTIA_VND1_GSYSCFG_10G, + AQUANTIA_VND1_GSTART_RATE_10G}, + [PHY_INTERFACE_MODE_USXGMII] = {0x080, AQUANTIA_VND1_GSYSCFG_10G, + AQUANTIA_VND1_GSTART_RATE_10G}, +}; + +static int aquantia_set_proto(struct phy_device *phydev) +{ + int i; + + if (!aquantia_syscfg[phydev->interface].cnt) + return 0; + + /* set the default rate to enable the SI link */ + phy_write(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GSTART_RATE, + aquantia_syscfg[phydev->interface].start_rate); + + /* set selected protocol for all relevant line side link speeds */ + for (i = 0; i <= aquantia_syscfg[phydev->interface].cnt; i++) + phy_write(phydev, MDIO_MMD_VEND1, + AQUANTIA_VND1_GSYSCFG_BASE + i, + aquantia_syscfg[phydev->interface].syscfg); + return 0; +} + +static bool aquantia_link_is_up(struct phy_device *phydev) +{ + u16 reg, regmask; + int devad, regnum; + + /* + * On Gen 2 and 3 we have a bit that indicates that both system and + * line side are ready for data, use that if possible. + */ + if (phydev->drv->data == AQUANTIA_GEN2 || + phydev->drv->data == AQUANTIA_GEN3) { + devad = MDIO_MMD_PHYXS; + regnum = AQUANTIA_SYSTEM_INTERFACE_SR; + regmask = AQUANTIA_SYSTEM_INTERFACE_SR_READY; + } else { + devad = MDIO_MMD_AN; + regnum = MDIO_STAT1; + regmask = MDIO_AN_STAT1_COMPLETE; + } + /* the register should be latched, do a double read */ + phy_read(phydev, devad, regnum); + reg = phy_read(phydev, devad, regnum); + + return !!(reg & regmask); +} + int aquantia_config(struct phy_device *phydev) { int interface = phydev->interface; @@ -314,6 +400,27 @@ int aquantia_config(struct phy_device *phydev) interface = PHY_INTERFACE_MODE_XFI; } + /* + * if link is up already we can just use it, otherwise configure + * the protocols in the PHY. If link is down set the system + * interface protocol to use based on phydev->interface + */ + if (!aquantia_link_is_up(phydev) && + (phydev->drv->data == AQUANTIA_GEN2 || + phydev->drv->data == AQUANTIA_GEN3)) { + /* set PHY in low power mode so we can configure protocols */ + phy_write(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GLOBAL_SC, + AQUANTIA_VND1_GLOBAL_SC_LP); + mdelay(10); + + /* configure protocol based on phydev->interface */ + aquantia_set_proto(phydev); + + /* wake PHY back up */ + phy_write(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GLOBAL_SC, 0); + mdelay(10); + } + val = phy_read(phydev, MDIO_MMD_PMAPMD, MII_BMCR); switch (interface) { -- 2.39.5