From 9b67e6007cc499e96c13dbf5047439ca17ed24b0 Mon Sep 17 00:00:00 2001 From: Jonas Karlman Date: Sat, 17 Feb 2024 00:22:37 +0000 Subject: [PATCH] rockchip: rk3328: Sync device tree from linux v6.8-rc1 Sync rk3328 device tree from linux v6.8-rc1. Signed-off-by: Jonas Karlman Reviewed-by: Kever Yang --- arch/arm/dts/rk3328-evb.dts | 1 + arch/arm/dts/rk3328-nanopi-r2s.dts | 3 +- arch/arm/dts/rk3328-orangepi-r1-plus-lts.dts | 4 +- arch/arm/dts/rk3328-orangepi-r1-plus.dts | 1 + arch/arm/dts/rk3328-roc-cc.dts | 3 +- arch/arm/dts/rk3328-rock-pi-e.dts | 55 +++++++++++++++++ arch/arm/dts/rk3328-rock64.dts | 1 + arch/arm/dts/rk3328-u-boot.dtsi | 6 -- arch/arm/dts/rk3328.dtsi | 64 +++++++++++++++----- 9 files changed, 112 insertions(+), 26 deletions(-) diff --git a/arch/arm/dts/rk3328-evb.dts b/arch/arm/dts/rk3328-evb.dts index ff6b466e0e..1eef550444 100644 --- a/arch/arm/dts/rk3328-evb.dts +++ b/arch/arm/dts/rk3328-evb.dts @@ -11,6 +11,7 @@ compatible = "rockchip,rk3328-evb", "rockchip,rk3328"; aliases { + ethernet0 = &gmac2phy; mmc0 = &sdmmc; mmc1 = &sdio; mmc2 = &emmc; diff --git a/arch/arm/dts/rk3328-nanopi-r2s.dts b/arch/arm/dts/rk3328-nanopi-r2s.dts index 3857d487ab..a4399da7d8 100644 --- a/arch/arm/dts/rk3328-nanopi-r2s.dts +++ b/arch/arm/dts/rk3328-nanopi-r2s.dts @@ -14,6 +14,7 @@ compatible = "friendlyarm,nanopi-r2s", "rockchip,rk3328"; aliases { + ethernet0 = &gmac2io; ethernet1 = &rtl8153; mmc0 = &sdmmc; }; @@ -34,7 +35,7 @@ pinctrl-0 = <&reset_button_pin>; pinctrl-names = "default"; - reset { + key-reset { label = "reset"; gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/dts/rk3328-orangepi-r1-plus-lts.dts b/arch/arm/dts/rk3328-orangepi-r1-plus-lts.dts index 5d7d567283..4237f2ee8f 100644 --- a/arch/arm/dts/rk3328-orangepi-r1-plus-lts.dts +++ b/arch/arm/dts/rk3328-orangepi-r1-plus-lts.dts @@ -26,9 +26,11 @@ compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; + motorcomm,auto-sleep-disabled; motorcomm,clk-out-frequency-hz = <125000000>; motorcomm,keep-pll-enabled; - motorcomm,auto-sleep-disabled; + motorcomm,rx-clk-drv-microamp = <5020>; + motorcomm,rx-data-drv-microamp = <5020>; pinctrl-0 = <ð_phy_reset_pin>; pinctrl-names = "default"; diff --git a/arch/arm/dts/rk3328-orangepi-r1-plus.dts b/arch/arm/dts/rk3328-orangepi-r1-plus.dts index dc83d74045..f20662929c 100644 --- a/arch/arm/dts/rk3328-orangepi-r1-plus.dts +++ b/arch/arm/dts/rk3328-orangepi-r1-plus.dts @@ -15,6 +15,7 @@ compatible = "xunlong,orangepi-r1-plus", "rockchip,rk3328"; aliases { + ethernet0 = &gmac2io; ethernet1 = &rtl8153; mmc0 = &sdmmc; }; diff --git a/arch/arm/dts/rk3328-roc-cc.dts b/arch/arm/dts/rk3328-roc-cc.dts index aa22a0c222..414897a57e 100644 --- a/arch/arm/dts/rk3328-roc-cc.dts +++ b/arch/arm/dts/rk3328-roc-cc.dts @@ -11,6 +11,7 @@ compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328"; aliases { + ethernet0 = &gmac2io; mmc0 = &sdmmc; mmc1 = &emmc; }; @@ -96,7 +97,6 @@ linux,default-trigger = "heartbeat"; gpios = <&rk805 1 GPIO_ACTIVE_LOW>; default-state = "on"; - mode = <0x23>; }; user_led: led-1 { @@ -104,7 +104,6 @@ linux,default-trigger = "mmc1"; gpios = <&rk805 0 GPIO_ACTIVE_LOW>; default-state = "off"; - mode = <0x05>; }; }; }; diff --git a/arch/arm/dts/rk3328-rock-pi-e.dts b/arch/arm/dts/rk3328-rock-pi-e.dts index 018a3a5075..3cda6c627b 100644 --- a/arch/arm/dts/rk3328-rock-pi-e.dts +++ b/arch/arm/dts/rk3328-rock-pi-e.dts @@ -21,6 +21,8 @@ compatible = "radxa,rockpi-e", "rockchip,rk3328"; aliases { + ethernet0 = &gmac2io; + ethernet1 = &gmac2phy; mmc0 = &sdmmc; mmc1 = &emmc; }; @@ -180,6 +182,59 @@ status = "okay"; }; +&gpio0 { + gpio-line-names = + /* GPIO0_A0 - A7 */ + "", "", "", "", "", "", "", "", + /* GPIO0_B0 - B7 */ + "", "", "", "", "", "", "", "", + /* GPIO0_C0 - C7 */ + "", "", "", "", "", "", "", "", + /* GPIO0_D0 - D7 */ + "", "", "", "pin-15 [GPIO0_D3]", "", "", "", ""; +}; + +&gpio1 { + gpio-line-names = + /* GPIO1_A0 - A7 */ + "", "", "", "", "", "", "", "", + /* GPIO1_B0 - B7 */ + "", "", "", "", "", "", "", "", + /* GPIO1_C0 - C7 */ + "", "", "", "", "", "", "", "", + /* GPIO1_D0 - D7 */ + "", "", "", "", "pin-07 [GPIO1_D4]", "", "", ""; +}; + +&gpio2 { + gpio-line-names = + /* GPIO2_A0 - A7 */ + "pin-08 [GPIO2_A0]", "pin-10 [GPIO2_A1]", "pin-11 [GPIO2_A2]", + "pin-13 [GPIO2-A3]", "pin-27 [GPIO2_A4]", "pin-28 [GPIO2_A5]", + "pin-33 [GPIO2_A6]", "", + /* GPIO2_B0 - B7 */ + "", "", "", "", "pin-26 [GPIO2_B4]", "", "", "pin-36 [GPIO2_B7]", + /* GPIO2_C0 - C7 */ + "pin-32 [GPIO2_C0]", "pin-35 [GPIO2_C1]", "pin-12 [GPIO2_C2]", + "pin-38 [GPIO2_C3]", "pin-29 [GPIO2_C4]", "pin-31 [GPIO2_C5]", + "pin-37 [GPIO2_C6]", "pin-40 [GPIO2_C7]", + /* GPIO2_D0 - D7 */ + "", "", "", "", "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + /* GPIO3_A0 - A7 */ + "pin-23 [GPIO3_A0]", "pin-19 [GPIO3_A1]", "pin-21 [GPIO3_A2]", + "", "pin-03 [GPIO3_A4]", "", "pin-05 [GPIO3_A6]", "", + /* GPIO3_B0 - B7 */ + "pin-24 [GPIO3_B0]", "", "", "", "", "", "", "", + /* GPIO3_C0 - C7 */ + "", "", "", "", "", "", "", "", + /* GPIO3_D0 - D7 */ + "", "", "", "", "", "", "", ""; +}; + &i2c1 { status = "okay"; diff --git a/arch/arm/dts/rk3328-rock64.dts b/arch/arm/dts/rk3328-rock64.dts index 0a27fa5271..229fe9da9c 100644 --- a/arch/arm/dts/rk3328-rock64.dts +++ b/arch/arm/dts/rk3328-rock64.dts @@ -11,6 +11,7 @@ compatible = "pine64,rock64", "rockchip,rk3328"; aliases { + ethernet0 = &gmac2io; mmc0 = &sdmmc; mmc1 = &emmc; }; diff --git a/arch/arm/dts/rk3328-u-boot.dtsi b/arch/arm/dts/rk3328-u-boot.dtsi index ea34bf6b78..a030f1a5e5 100644 --- a/arch/arm/dts/rk3328-u-boot.dtsi +++ b/arch/arm/dts/rk3328-u-boot.dtsi @@ -26,12 +26,6 @@ 0x0 0xff720000 0x0 0x1000 0x0 0xff798000 0x0 0x1000>; }; - - rng: rng@ff060000 { - compatible = "rockchip,rk3328-crypto"; - reg = <0x0 0xff060000 0x0 0x4000>; - status = "okay"; - }; }; &cru { diff --git a/arch/arm/dts/rk3328.dtsi b/arch/arm/dts/rk3328.dtsi index e8d8f00be8..fe81b97bbe 100644 --- a/arch/arm/dts/rk3328.dtsi +++ b/arch/arm/dts/rk3328.dtsi @@ -20,6 +20,10 @@ #size-cells = <2>; aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -27,8 +31,6 @@ i2c1 = &i2c1; i2c2 = &i2c2; i2c3 = &i2c3; - ethernet0 = &gmac2io; - ethernet1 = &gmac2phy; }; cpus { @@ -102,10 +104,12 @@ l2: l2-cache0 { compatible = "cache"; + cache-level = <2>; + cache-unified; }; }; - cpu0_opp_table: opp_table0 { + cpu0_opp_table: opp-table-0 { compatible = "operating-points-v2"; opp-shared; @@ -306,6 +310,10 @@ }; power-domain@RK3328_PD_VIDEO { reg = ; + clocks = <&cru ACLK_RKVDEC>, + <&cru HCLK_RKVDEC>, + <&cru SCLK_VDEC_CABAC>, + <&cru SCLK_VDEC_CORE>; #power-domain-cells = <0>; }; power-domain@RK3328_PD_VPU { @@ -489,7 +497,7 @@ status = "disabled"; }; - dmac: dmac@ff1f0000 { + dmac: dma-controller@ff1f0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x0 0xff1f0000 0x0 0x4000>; interrupts = , @@ -599,7 +607,7 @@ gpu: gpu@ff300000 { compatible = "rockchip,rk3328-mali", "arm,mali-450"; - reg = <0x0 0xff300000 0x0 0x40000>; + reg = <0x0 0xff300000 0x0 0x30000>; interrupts = , , , @@ -623,7 +631,6 @@ compatible = "rockchip,iommu"; reg = <0x0 0xff330200 0 0x100>; interrupts = ; - interrupt-names = "h265e_mmu"; clocks = <&cru ACLK_H265>, <&cru PCLK_H265>; clock-names = "aclk", "iface"; #iommu-cells = <0>; @@ -634,7 +641,6 @@ compatible = "rockchip,iommu"; reg = <0x0 0xff340800 0x0 0x40>; interrupts = ; - interrupt-names = "vepu_mmu"; clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; clock-names = "aclk", "iface"; #iommu-cells = <0>; @@ -656,22 +662,34 @@ compatible = "rockchip,iommu"; reg = <0x0 0xff350800 0x0 0x40>; interrupts = ; - interrupt-names = "vpu_mmu"; clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; clock-names = "aclk", "iface"; #iommu-cells = <0>; power-domains = <&power RK3328_PD_VPU>; }; - rkvdec_mmu: iommu@ff360480 { + vdec: video-codec@ff360000 { + compatible = "rockchip,rk3328-vdec", "rockchip,rk3399-vdec"; + reg = <0x0 0xff360000 0x0 0x480>; + interrupts = ; + clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>, + <&cru SCLK_VDEC_CABAC>, <&cru SCLK_VDEC_CORE>; + clock-names = "axi", "ahb", "cabac", "core"; + assigned-clocks = <&cru ACLK_RKVDEC>, <&cru SCLK_VDEC_CABAC>, + <&cru SCLK_VDEC_CORE>; + assigned-clock-rates = <400000000>, <400000000>, <300000000>; + iommus = <&vdec_mmu>; + power-domains = <&power RK3328_PD_VIDEO>; + }; + + vdec_mmu: iommu@ff360480 { compatible = "rockchip,iommu"; reg = <0x0 0xff360480 0x0 0x40>, <0x0 0xff3604c0 0x0 0x40>; interrupts = ; - interrupt-names = "rkvdec_mmu"; clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>; clock-names = "aclk", "iface"; #iommu-cells = <0>; - status = "disabled"; + power-domains = <&power RK3328_PD_VIDEO>; }; vop: vop@ff370000 { @@ -700,7 +718,6 @@ compatible = "rockchip,iommu"; reg = <0x0 0xff373f00 0x0 0x100>; interrupts = ; - interrupt-names = "vop_mmu"; clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>; clock-names = "aclk", "iface"; #iommu-cells = <0>; @@ -901,6 +918,8 @@ resets = <&cru SRST_GMAC2IO_A>; reset-names = "stmmaceth"; rockchip,grf = <&grf>; + tx-fifo-depth = <2048>; + rx-fifo-depth = <4096>; snps,txpbl = <0x4>; status = "disabled"; }; @@ -923,6 +942,8 @@ reset-names = "stmmaceth"; phy-mode = "rmii"; phy-handle = <&phy>; + tx-fifo-depth = <2048>; + rx-fifo-depth = <4096>; snps,txpbl = <0x4>; clock_in_out = "output"; status = "disabled"; @@ -1021,6 +1042,17 @@ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; + crypto: crypto@ff060000 { + compatible = "rockchip,rk3328-crypto"; + reg = <0x0 0xff060000 0x0 0x4000>; + interrupts = ; + clocks = <&cru HCLK_CRYPTO_MST>, <&cru HCLK_CRYPTO_SLV>, + <&cru SCLK_CRYPTO>; + clock-names = "hclk_master", "hclk_slave", "sclk"; + resets = <&cru SRST_CRYPTO>; + reset-names = "crypto-rst"; + }; + pinctrl: pinctrl { compatible = "rockchip,rk3328-pinctrl"; rockchip,grf = <&grf>; @@ -1028,7 +1060,7 @@ #size-cells = <2>; ranges; - gpio0: gpio0@ff210000 { + gpio0: gpio@ff210000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff210000 0x0 0x100>; interrupts = ; @@ -1041,7 +1073,7 @@ #interrupt-cells = <2>; }; - gpio1: gpio1@ff220000 { + gpio1: gpio@ff220000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff220000 0x0 0x100>; interrupts = ; @@ -1054,7 +1086,7 @@ #interrupt-cells = <2>; }; - gpio2: gpio2@ff230000 { + gpio2: gpio@ff230000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff230000 0x0 0x100>; interrupts = ; @@ -1067,7 +1099,7 @@ #interrupt-cells = <2>; }; - gpio3: gpio3@ff240000 { + gpio3: gpio@ff240000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff240000 0x0 0x100>; interrupts = ; -- 2.39.5