From 9570df03ee37f437f9ba3ddc25c8c6527a396992 Mon Sep 17 00:00:00 2001 From: Rajesh Bhagat Date: Thu, 27 Dec 2018 04:37:59 +0000 Subject: [PATCH] armv8: ls2088ardb: Add TFABOOT support TFABOOT support includes: - ls2088ardb_tfa_defconfig to be loaded by trusted firmware - environment address and size changes for TFABOOT - define BOOTCOMMAND for TFABOOT - remove EL3 specific erratas for TFABOOT Signed-off-by: Pankit Garg Signed-off-by: Ruchika Gupta Signed-off-by: Rajesh Bhagat Reviewed-by: York Sun --- arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 14 +- arch/arm/dts/fsl-ls2088a-rdb-qspi.dts | 4 + board/freescale/ls2080a/ls2080a.c | 7 + board/freescale/ls2080ardb/MAINTAINERS | 2 + board/freescale/ls2080ardb/ddr.c | 12 ++ board/freescale/ls2080ardb/ls2080ardb.c | 37 +++++ configs/ls2088ardb_tfa_SECURE_BOOT_defconfig | 74 ++++++++++ configs/ls2088ardb_tfa_defconfig | 72 ++++++++++ include/configs/ls2080a_common.h | 8 ++ include/configs/ls2080ardb.h | 137 ++++++++++++++++++- 10 files changed, 359 insertions(+), 8 deletions(-) create mode 100644 configs/ls2088ardb_tfa_SECURE_BOOT_defconfig create mode 100644 configs/ls2088ardb_tfa_defconfig diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index 4e6a3cb223..01c5068ab6 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -145,20 +145,20 @@ config ARCH_LS2080A select SYS_FSL_SRDS_2 select FSL_TZASC_1 select FSL_TZASC_2 - select SYS_FSL_ERRATUM_A008336 - select SYS_FSL_ERRATUM_A008511 - select SYS_FSL_ERRATUM_A008514 + select SYS_FSL_ERRATUM_A008336 if !TFABOOT + select SYS_FSL_ERRATUM_A008511 if !TFABOOT + select SYS_FSL_ERRATUM_A008514 if !TFABOOT select SYS_FSL_ERRATUM_A008585 select SYS_FSL_ERRATUM_A008997 select SYS_FSL_ERRATUM_A009007 select SYS_FSL_ERRATUM_A009008 select SYS_FSL_ERRATUM_A009635 - select SYS_FSL_ERRATUM_A009663 + select SYS_FSL_ERRATUM_A009663 if !TFABOOT select SYS_FSL_ERRATUM_A009798 select SYS_FSL_ERRATUM_A009801 - select SYS_FSL_ERRATUM_A009803 - select SYS_FSL_ERRATUM_A009942 - select SYS_FSL_ERRATUM_A010165 + select SYS_FSL_ERRATUM_A009803 if !TFABOOT + select SYS_FSL_ERRATUM_A009942 if !TFABOOT + select SYS_FSL_ERRATUM_A010165 if !TFABOOT select SYS_FSL_ERRATUM_A009203 select ARCH_EARLY_INIT_R select BOARD_EARLY_INIT_F diff --git a/arch/arm/dts/fsl-ls2088a-rdb-qspi.dts b/arch/arm/dts/fsl-ls2088a-rdb-qspi.dts index c8bf9a01fe..b6d4f0f6af 100644 --- a/arch/arm/dts/fsl-ls2088a-rdb-qspi.dts +++ b/arch/arm/dts/fsl-ls2088a-rdb-qspi.dts @@ -56,3 +56,7 @@ reg = <1>; }; }; + +&sata { + status = "okay"; +}; diff --git a/board/freescale/ls2080a/ls2080a.c b/board/freescale/ls2080a/ls2080a.c index 698ae1f9a6..ad3596a8a1 100644 --- a/board/freescale/ls2080a/ls2080a.c +++ b/board/freescale/ls2080a/ls2080a.c @@ -142,3 +142,10 @@ void reset_phy(void) { } #endif + +#ifdef CONFIG_TFABOOT +void *env_sf_get_env_addr(void) +{ + return (void *)(CONFIG_SYS_FSL_QSPI_BASE1 + CONFIG_ENV_OFFSET); +} +#endif diff --git a/board/freescale/ls2080ardb/MAINTAINERS b/board/freescale/ls2080ardb/MAINTAINERS index bbe56e2052..1f6014deed 100644 --- a/board/freescale/ls2080ardb/MAINTAINERS +++ b/board/freescale/ls2080ardb/MAINTAINERS @@ -9,8 +9,10 @@ F: configs/ls2080ardb_nand_defconfig LS2088A_QSPI-boot BOARD M: Priyanka Jain +M: Rajesh Bhagat S: Maintained F: configs/ls2088ardb_qspi_defconfig +F: configs/ls2088ardb_tfa_defconfig LS2081ARDB BOARD M: Priyanka Jain diff --git a/board/freescale/ls2080ardb/ddr.c b/board/freescale/ls2080ardb/ddr.c index 26eb14b812..72ce872c75 100644 --- a/board/freescale/ls2080ardb/ddr.c +++ b/board/freescale/ls2080ardb/ddr.c @@ -160,6 +160,17 @@ found: } } +#ifdef CONFIG_TFABOOT +int fsl_initdram(void) +{ + gd->ram_size = tfa_get_dram_size(); + + if (!gd->ram_size) + gd->ram_size = fsl_ddr_sdram_size(); + + return 0; +} +#else int fsl_initdram(void) { #if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD) @@ -172,3 +183,4 @@ int fsl_initdram(void) return 0; } +#endif /* CONFIG_TFABOOT */ diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c index cf91bc30fb..20e1fce0fc 100644 --- a/board/freescale/ls2080ardb/ls2080ardb.c +++ b/board/freescale/ls2080ardb/ls2080ardb.c @@ -346,12 +346,47 @@ void board_quiesce_devices(void) void fsl_fdt_fixup_flash(void *fdt) { int offset; +#ifdef CONFIG_TFABOOT + u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE; + u32 val; +#endif /* * IFC and QSPI are muxed on board. * So disable IFC node in dts if QSPI is enabled or * disable QSPI node in dts in case QSPI is not enabled. */ +#ifdef CONFIG_TFABOOT + enum boot_src src = get_boot_src(); + bool disable_ifc = false; + + switch (src) { + case BOOT_SOURCE_IFC_NOR: + disable_ifc = false; + break; + case BOOT_SOURCE_QSPI_NOR: + disable_ifc = true; + break; + default: + val = in_le32(dcfg_ccsr + DCFG_RCWSR15 / 4); + if (DCFG_RCWSR15_IFCGRPABASE_QSPI == (val & (u32)0x3)) + disable_ifc = true; + break; + } + + if (disable_ifc) { + offset = fdt_path_offset(fdt, "/soc/ifc"); + + if (offset < 0) + offset = fdt_path_offset(fdt, "/ifc"); + } else { + offset = fdt_path_offset(fdt, "/soc/quadspi"); + + if (offset < 0) + offset = fdt_path_offset(fdt, "/quadspi"); + } + +#else #ifdef CONFIG_FSL_QSPI offset = fdt_path_offset(fdt, "/soc/ifc"); @@ -363,6 +398,8 @@ void fsl_fdt_fixup_flash(void *fdt) if (offset < 0) offset = fdt_path_offset(fdt, "/quadspi"); #endif +#endif + if (offset < 0) return; diff --git a/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig b/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig new file mode 100644 index 0000000000..cb9490a867 --- /dev/null +++ b/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig @@ -0,0 +1,74 @@ +CONFIG_ARM=y +CONFIG_TARGET_LS2080ARDB=y +CONFIG_SYS_TEXT_BASE=0x82000000 +CONFIG_TFABOOT=y +CONFIG_SECURE_BOOT=y +CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y +CONFIG_QSPI_AHB_INIT=y +CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y +CONFIG_NR_DRAM_BANKS=3 +# CONFIG_SYS_MALLOC_F is not set +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0600 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" +# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_MISC_INIT_R=y +CONFIG_CMD_IMLS=y +CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y +CONFIG_CMD_SF=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_CACHE=y +CONFIG_CMD_DATE=y +CONFIG_MP=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-rdb" +CONFIG_ENV_IS_NOWHERE=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM=y +CONFIG_FSL_CAAM=y +CONFIG_FSL_ESDHC=y +CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y +CONFIG_SYS_FLASH_CFI=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_SPANSION=y + +CONFIG_PHYLIB=y +CONFIG_PHY_AQUANTIA=y +CONFIG_E1000=y +CONFIG_MII=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_DM_PCI_COMPAT=y +CONFIG_PCIE_LAYERSCAPE=y +CONFIG_CONS_INDEX=2 +CONFIG_SYS_NS16550=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_FSL_DSPI=y +CONFIG_FSL_QSPI=y +CONFIG_FSL_SPI_ALIGNED_TXFIFO=y + +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_STORAGE=y +CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_BLK=y +CONFIG_DM_MMC=y +CONFIG_RSA=y +CONFIG_SPL_RSA=y +CONFIG_RSA_SOFTWARE_EXP=y diff --git a/configs/ls2088ardb_tfa_defconfig b/configs/ls2088ardb_tfa_defconfig new file mode 100644 index 0000000000..bb5e4f8bb5 --- /dev/null +++ b/configs/ls2088ardb_tfa_defconfig @@ -0,0 +1,72 @@ +CONFIG_ARM=y +CONFIG_TARGET_LS2080ARDB=y +CONFIG_SYS_TEXT_BASE=0x82000000 +CONFIG_TFABOOT=y +CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y +CONFIG_QSPI_AHB_INIT=y +CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y +CONFIG_NR_DRAM_BANKS=3 +# CONFIG_SYS_MALLOC_F is not set +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0600 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" +# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_MISC_INIT_R=y +CONFIG_CMD_IMLS=y +CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y +CONFIG_CMD_SF=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_CACHE=y +CONFIG_CMD_DATE=y +CONFIG_MP=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2088a-rdb-qspi" +CONFIG_ENV_IS_IN_FLASH=y +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM=y +CONFIG_FSL_CAAM=y +CONFIG_FSL_ESDHC=y +CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y +CONFIG_SYS_FLASH_CFI=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_SPANSION=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set + +CONFIG_PHYLIB=y +CONFIG_PHY_AQUANTIA=y +CONFIG_E1000=y +CONFIG_MII=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_DM_PCI_COMPAT=y +CONFIG_PCIE_LAYERSCAPE=y +CONFIG_CONS_INDEX=2 +CONFIG_SYS_NS16550=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_FSL_DSPI=y +CONFIG_FSL_QSPI=y +CONFIG_FSL_SPI_ALIGNED_TXFIFO=y + +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_STORAGE=y +CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_BLK=y +CONFIG_DM_MMC=y diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index 713e1d1d09..235a757f75 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -16,17 +16,23 @@ #include /* Link Definitions */ +#ifdef CONFIG_TFABOOT +#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE +#else #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0) +#endif /* We need architecture specific misc initializations */ /* Link Definitions */ +#ifndef CONFIG_TFABOOT #ifndef CONFIG_QSPI_BOOT #else #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ #define CONFIG_ENV_OFFSET 0x300000 /* 3MB */ #define CONFIG_ENV_SECT_SIZE 0x40000 #endif +#endif #define CONFIG_SKIP_LOWLEVEL_INIT @@ -185,6 +191,7 @@ unsigned long long get_qixis_addr(void); "mcinitcmd=fsl_mc start mc 0x580a00000" \ " 0x580e00000 \0" +#ifndef CONFIG_TFABOOT #ifdef CONFIG_SD_BOOT #define CONFIG_BOOTCOMMAND "mmc read 0x80200000 0x6800 0x800;"\ " fsl_mc apply dpl 0x80200000 &&" \ @@ -195,6 +202,7 @@ unsigned long long get_qixis_addr(void); " cp.b $kernel_start $kernel_load" \ " $kernel_size && bootm $kernel_load" #endif +#endif /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index 295b824aa0..ef0f4ff48e 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -69,8 +69,17 @@ unsigned long get_board_sys_clk(void); #define CONFIG_SYS_SCSI_MAX_LUN 1 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ CONFIG_SYS_SCSI_MAX_LUN) +#ifdef CONFIG_TFABOOT +#define CONFIG_SYS_MMC_ENV_DEV 0 -#ifndef CONFIG_FSL_QSPI +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_OFFSET 0x500000 /* 5MB */ +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \ + CONFIG_ENV_OFFSET) +#define CONFIG_ENV_SECT_SIZE 0x40000 +#endif + +#if !defined(CONFIG_FSL_QSPI) || defined(CONFIG_TFABOOT) /* undefined CONFIG_FSL_DDR_SYNC_REFRESH for simulator */ #define CONFIG_SYS_NOR0_CSPR_EXT (0x0) @@ -212,9 +221,11 @@ unsigned long get_board_sys_clk(void); #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 +#ifndef CONFIG_TFABOOT #define CONFIG_ENV_OFFSET (2048 * 1024) #define CONFIG_ENV_SECT_SIZE 0x20000 #define CONFIG_ENV_SIZE 0x2000 +#endif #define CONFIG_SPL_PAD_TO 0x80000 #define CONFIG_SYS_NAND_U_BOOT_OFFS (1024 * 1024) #define CONFIG_SYS_NAND_U_BOOT_SIZE (512 * 1024) @@ -237,10 +248,12 @@ unsigned long get_board_sys_clk(void); #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 +#ifndef CONFIG_TFABOOT #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000) #define CONFIG_ENV_SECT_SIZE 0x20000 #define CONFIG_ENV_SIZE 0x2000 #endif +#endif /* Debug Server firmware */ #define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR @@ -323,6 +336,27 @@ unsigned long get_board_sys_clk(void); func(SCSI, scsi, 0) #include +#ifdef CONFIG_TFABOOT +#define QSPI_MC_INIT_CMD \ + "env exists secureboot && " \ + "esbc_validate 0x20700000 && " \ + "esbc_validate 0x20740000;" \ + "fsl_mc start mc 0x20a00000 0x20e00000 \0" +#define SD_MC_INIT_CMD \ + "mmcinfo;mmc read 0x80000000 0x5000 0x800;" \ + "mmc read 0x80100000 0x7000 0x800;" \ + "env exists secureboot && " \ + "mmc read 0x80700000 0x3800 0x10 && " \ + "mmc read 0x80740000 0x3A00 0x10 && " \ + "esbc_validate 0x80700000 && " \ + "esbc_validate 0x80740000 ;" \ + "fsl_mc start mc 0x80000000 0x80100000\0" +#define IFC_MC_INIT_CMD \ + "env exists secureboot && " \ + "esbc_validate 0x580700000 && " \ + "esbc_validate 0x580740000; " \ + "fsl_mc start mc 0x580a00000 0x580e00000 \0" +#else #ifdef CONFIG_QSPI_BOOT #define MC_INIT_CMD \ "mcinitcmd=env exists secureboot && " \ @@ -347,9 +381,80 @@ unsigned long get_board_sys_clk(void); "esbc_validate 0x580740000; " \ "fsl_mc start mc 0x580a00000 0x580e00000 \0" #endif +#endif /* Initial environment variables */ #undef CONFIG_EXTRA_ENV_SETTINGS +#ifdef CONFIG_TFABOOT +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hwconfig=fsl_ddr:bank_intlv=auto\0" \ + "ramdisk_addr=0x800000\0" \ + "ramdisk_size=0x2000000\0" \ + "fdt_high=0xa0000000\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "fdt_addr=0x64f00000\0" \ + "kernel_addr=0x581000000\0" \ + "kernel_start=0x1000000\0" \ + "kernelheader_start=0x800000\0" \ + "scriptaddr=0x80000000\0" \ + "scripthdraddr=0x80080000\0" \ + "fdtheader_addr_r=0x80100000\0" \ + "kernelheader_addr_r=0x80200000\0" \ + "kernelheader_addr=0x580800000\0" \ + "kernel_addr_r=0x81000000\0" \ + "kernelheader_size=0x40000\0" \ + "fdt_addr_r=0x90000000\0" \ + "load_addr=0xa0000000\0" \ + "kernel_size=0x2800000\0" \ + "kernel_addr_sd=0x8000\0" \ + "kernel_size_sd=0x14000\0" \ + "console=ttyAMA0,38400n8\0" \ + "mcmemsize=0x70000000\0" \ + "sd_bootcmd=echo Trying load from SD ..;" \ + "mmcinfo; mmc read $load_addr " \ + "$kernel_addr_sd $kernel_size_sd && " \ + "bootm $load_addr#$board\0" \ + QSPI_MC_INIT_CMD \ + BOOTENV \ + "boot_scripts=ls2088ardb_boot.scr\0" \ + "boot_script_hdr=hdr_ls2088ardb_bs.out\0" \ + "scan_dev_for_boot_part=" \ + "part list ${devtype} ${devnum} devplist; " \ + "env exists devplist || setenv devplist 1; " \ + "for distro_bootpart in ${devplist}; do " \ + "if fstype ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "bootfstype; then " \ + "run scan_dev_for_boot; " \ + "fi; " \ + "done\0" \ + "scan_dev_for_boot=" \ + "echo Scanning ${devtype} " \ + "${devnum}:${distro_bootpart}...; " \ + "for prefix in ${boot_prefixes}; do " \ + "run scan_dev_for_scripts; " \ + "done;\0" \ + "boot_a_script=" \ + "load ${devtype} ${devnum}:${distro_bootpart} " \ + "${scriptaddr} ${prefix}${script}; " \ + "env exists secureboot && load ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "${scripthdraddr} ${prefix}${boot_script_hdr} " \ + "&& esbc_validate ${scripthdraddr};" \ + "source ${scriptaddr}\0" \ + "qspi_bootcmd=echo Trying load from qspi..;" \ + "sf probe && sf read $load_addr " \ + "$kernel_start $kernel_size ; env exists secureboot &&" \ + "sf read $kernelheader_addr_r $kernelheader_start " \ + "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\ + " bootm $load_addr#$board\0" \ + "nor_bootcmd=echo Trying load from nor..;" \ + "cp.b $kernel_addr $load_addr " \ + "$kernel_size ; env exists secureboot && " \ + "cp.b $kernelheader_addr $kernelheader_addr_r " \ + "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\ + "bootm $load_addr#$board\0" +#else #define CONFIG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:bank_intlv=auto\0" \ "ramdisk_addr=0x800000\0" \ @@ -418,7 +523,36 @@ unsigned long get_board_sys_clk(void); "cp.b $kernelheader_addr $kernelheader_addr_r " \ "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\ "bootm $load_addr#$board\0" +#endif + +#ifdef CONFIG_TFABOOT +#define QSPI_NOR_BOOTCOMMAND \ + "env exists mcinitcmd && env exists secureboot "\ + "&& esbc_validate 0x20780000; " \ + "env exists mcinitcmd && " \ + "fsl_mc lazyapply dpl 0x20d00000; " \ + "run distro_bootcmd;run qspi_bootcmd; " \ + "env exists secureboot && esbc_halt;" + +/* Try to boot an on-SD kernel first, then do normal distro boot */ +#define SD_BOOTCOMMAND \ + "env exists mcinitcmd && env exists secureboot "\ + "&& mmcinfo && mmc read $load_addr 0x3c00 0x800 " \ + "&& esbc_validate $load_addr; " \ + "env exists mcinitcmd && run mcinitcmd " \ + "&& mmc read 0x88000000 0x6800 0x800 " \ + "&& fsl_mc lazyapply dpl 0x88000000; " \ + "run distro_bootcmd;run sd_bootcmd; " \ + "env exists secureboot && esbc_halt;" +/* Try to boot an on-NOR kernel first, then do normal distro boot */ +#define IFC_NOR_BOOTCOMMAND \ + "env exists mcinitcmd && env exists secureboot "\ + "&& esbc_validate 0x580780000; env exists mcinitcmd "\ + "&& fsl_mc lazyapply dpl 0x580d00000;" \ + "run distro_bootcmd;run nor_bootcmd; " \ + "env exists secureboot && esbc_halt;" +#else #undef CONFIG_BOOTCOMMAND #ifdef CONFIG_QSPI_BOOT /* Try to boot an on-QSPI kernel first, then do normal distro boot */ @@ -449,6 +583,7 @@ unsigned long get_board_sys_clk(void); "run distro_bootcmd;run nor_bootcmd; " \ "env exists secureboot && esbc_halt;" #endif +#endif /* MAC/PHY configuration */ #ifdef CONFIG_FSL_MC_ENET -- 2.39.5