From 942b5fc03218d1c94468fc658e7dec65dabcc830 Mon Sep 17 00:00:00 2001 From: Benedikt Grassl Date: Tue, 14 Apr 2020 07:32:12 +0200 Subject: [PATCH] mmc: zynq: parse dt when probing Currently, the entry "bus-width = <8>" in the ZynqMP's sdhci nodes is not evaluated. This results in the bus width staying at its default value (4 bit in HS200 mode). Fix this by calling mmc_of_parse. This function also checks for the "no-1-8-v" and "max-frequency" entries. Remove the handling of those nodes from this driver. Signed-off-by: Benedikt Grassl Reviewed-by: Jaehoon Chung Signed-off-by: Michal Simek --- drivers/mmc/sdhci.c | 3 +-- drivers/mmc/zynq_sdhci.c | 15 ++++++--------- include/sdhci.h | 1 - 3 files changed, 7 insertions(+), 12 deletions(-) diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c index 520c9f9feb..372dc0a820 100644 --- a/drivers/mmc/sdhci.c +++ b/drivers/mmc/sdhci.c @@ -839,8 +839,7 @@ int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host, cfg->host_caps &= ~MMC_MODE_HS_52MHz; } - if (!(cfg->voltages & MMC_VDD_165_195) || - (host->quirks & SDHCI_QUIRK_NO_1_8_V)) + if (!(cfg->voltages & MMC_VDD_165_195)) caps_1 &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_DDR50); diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c index da3ff53da1..18925d01fa 100644 --- a/drivers/mmc/zynq_sdhci.c +++ b/drivers/mmc/zynq_sdhci.c @@ -22,14 +22,12 @@ DECLARE_GLOBAL_DATA_PTR; struct arasan_sdhci_plat { struct mmc_config cfg; struct mmc mmc; - unsigned int f_max; }; struct arasan_sdhci_priv { struct sdhci_host *host; u8 deviceid; u8 bank; - u8 no_1p8; }; #if defined(CONFIG_ARCH_ZYNQMP) @@ -238,8 +236,11 @@ static int arasan_sdhci_probe(struct udevice *dev) host->quirks |= SDHCI_QUIRK_BROKEN_HISPD_MODE; #endif - if (priv->no_1p8) - host->quirks |= SDHCI_QUIRK_NO_1_8_V; + plat->cfg.f_max = CONFIG_ZYNQ_SDHCI_MAX_FREQ; + + ret = mmc_of_parse(dev, &plat->cfg); + if (ret) + return ret; host->max_clk = clock; @@ -247,7 +248,7 @@ static int arasan_sdhci_probe(struct udevice *dev) host->mmc->dev = dev; host->mmc->priv = host; - ret = sdhci_setup_cfg(&plat->cfg, host, plat->f_max, + ret = sdhci_setup_cfg(&plat->cfg, host, plat->cfg.f_max, CONFIG_ZYNQ_SDHCI_MIN_FREQ); if (ret) return ret; @@ -258,7 +259,6 @@ static int arasan_sdhci_probe(struct udevice *dev) static int arasan_sdhci_ofdata_to_platdata(struct udevice *dev) { - struct arasan_sdhci_plat *plat = dev_get_platdata(dev); struct arasan_sdhci_priv *priv = dev_get_priv(dev); priv->host = calloc(1, sizeof(struct sdhci_host)); @@ -277,10 +277,7 @@ static int arasan_sdhci_ofdata_to_platdata(struct udevice *dev) priv->deviceid = dev_read_u32_default(dev, "xlnx,device_id", -1); priv->bank = dev_read_u32_default(dev, "xlnx,mio_bank", -1); - priv->no_1p8 = dev_read_bool(dev, "no-1-8-v"); - plat->f_max = dev_read_u32_default(dev, "max-frequency", - CONFIG_ZYNQ_SDHCI_MAX_FREQ); return 0; } diff --git a/include/sdhci.h b/include/sdhci.h index aa4378fd57..0ef8c2ed62 100644 --- a/include/sdhci.h +++ b/include/sdhci.h @@ -243,7 +243,6 @@ #define SDHCI_QUIRK_BROKEN_HISPD_MODE BIT(5) #define SDHCI_QUIRK_WAIT_SEND_CMD (1 << 6) #define SDHCI_QUIRK_USE_WIDE8 (1 << 8) -#define SDHCI_QUIRK_NO_1_8_V (1 << 9) /* to make gcc happy */ struct sdhci_host; -- 2.39.5