From 8494fe077c863ef0514ba8de579809d37267f54e Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Thu, 5 May 2022 19:06:12 +0800 Subject: [PATCH] imx: toradex/verdin-imx8mm/p: cleanup board watchdog code pinctrl_wdog already marked u-boot,dm-spl, so clean up board code. The set_wdog_reset() function is not necessary as this is handled by the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property being set. Signed-off-by: Peng Fan --- board/toradex/verdin-imx8mm/spl.c | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/board/toradex/verdin-imx8mm/spl.c b/board/toradex/verdin-imx8mm/spl.c index 1f3f38351e..1f643129d9 100644 --- a/board/toradex/verdin-imx8mm/spl.c +++ b/board/toradex/verdin-imx8mm/spl.c @@ -75,7 +75,6 @@ int board_fit_config_name_match(const char *name) #endif #define UART_PAD_CTRL (PAD_CTL_PUE | PAD_CTL_PE | PAD_CTL_DSE4) -#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE) /* Verdin UART_3, Console/Debug UART */ static iomux_v3_cfg_t const uart_pads[] = { @@ -83,20 +82,10 @@ static iomux_v3_cfg_t const uart_pads[] = { IMX8MM_PAD_SAI2_RXC_UART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL), }; -static iomux_v3_cfg_t const wdog_pads[] = { - IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL), -}; - __weak void board_early_init(void) { - struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR; - init_uart_clk(0); - imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads)); - - set_wdog_reset(wdog); - imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); } -- 2.39.5