From 7ee2016d611293fd6ce9a256a506f749440f5840 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Wed, 24 Nov 2021 09:26:47 -0700 Subject: [PATCH] ide: Drop unused CONFIG options CONFIG_SYS_ATA_PORT_ADDR is not used in the code anymore. Drop it and use ATA_PORT_ADDR() locally instead. Drop CONFIG_IDE_RESET_ROUTINE and CONFIG_IDE_SWAP_IO which are also unused. Signed-off-by: Simon Glass --- README | 3 --- arch/arm/mach-kirkwood/include/mach/config.h | 2 -- arch/powerpc/include/asm/config.h | 3 --- drivers/block/ide.c | 12 +++++------- include/configs/edminiv2.h | 2 -- include/configs/r2dplus.h | 1 - scripts/config_whitelist.txt | 2 -- 7 files changed, 5 insertions(+), 20 deletions(-) diff --git a/README b/README index 05b0d3fdf7..5dee3eea5b 100644 --- a/README +++ b/README @@ -772,9 +772,6 @@ The following options need to be configured: least one non-MTD partition type as well. - IDE Reset method: - CONFIG_IDE_RESET_ROUTINE - this is defined in several - board configurations files but used nowhere! - CONFIG_IDE_RESET - is this is defined, IDE Reset will be performed by calling the function ide_set_reset(int reset) diff --git a/arch/arm/mach-kirkwood/include/mach/config.h b/arch/arm/mach-kirkwood/include/mach/config.h index cf6b1b9b63..9fd90611bd 100644 --- a/arch/arm/mach-kirkwood/include/mach/config.h +++ b/arch/arm/mach-kirkwood/include/mach/config.h @@ -67,8 +67,6 @@ */ #ifdef CONFIG_IDE #define __io -/* Needs byte-swapping for ATA data register */ -#define CONFIG_IDE_SWAP_IO /* Data, registers and alternate blocks are at the same offset */ #define CONFIG_SYS_ATA_DATA_OFFSET (0x0100) #define CONFIG_SYS_ATA_REG_OFFSET (0x0100) diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h index a97b72de1b..354137124d 100644 --- a/arch/powerpc/include/asm/config.h +++ b/arch/powerpc/include/asm/config.h @@ -51,9 +51,6 @@ /* The FMAN driver uses the PHYLIB infrastructure */ -/* All PPC boards must swap IDE bytes */ -#define CONFIG_IDE_SWAP_IO - #if defined(CONFIG_DM_SERIAL) && !defined(CONFIG_CLK_MPC83XX) /* * TODO: Convert this to a clock driver exists that can give us the UART diff --git a/drivers/block/ide.c b/drivers/block/ide.c index c99076c6f4..5b9fb821e0 100644 --- a/drivers/block/ide.c +++ b/drivers/block/ide.c @@ -45,9 +45,7 @@ struct blk_desc ide_dev_desc[CONFIG_SYS_IDE_MAXDEVICE]; #define IDE_SPIN_UP_TIME_OUT 5000 /* 5 sec spin-up timeout */ -#ifndef CONFIG_SYS_ATA_PORT_ADDR -#define CONFIG_SYS_ATA_PORT_ADDR(port) (port) -#endif +#define ATA_PORT_ADDR(port) (port) #ifdef CONFIG_IDE_RESET extern void ide_set_reset(int idereset); @@ -679,7 +677,7 @@ __weak void ide_outb(int dev, int port, unsigned char val) { debug("ide_outb (dev= %d, port= 0x%x, val= 0x%02x) : @ 0x%08lx\n", dev, port, val, - (ATA_CURR_BASE(dev) + CONFIG_SYS_ATA_PORT_ADDR(port))); + (ATA_CURR_BASE(dev) + ATA_PORT_ADDR(port))); #if defined(CONFIG_IDE_AHB) if (port) { @@ -690,7 +688,7 @@ __weak void ide_outb(int dev, int port, unsigned char val) outb(val, (ATA_CURR_BASE(dev))); } #else - outb(val, (ATA_CURR_BASE(dev) + CONFIG_SYS_ATA_PORT_ADDR(port))); + outb(val, (ATA_CURR_BASE(dev) + ATA_PORT_ADDR(port))); #endif } @@ -701,12 +699,12 @@ __weak unsigned char ide_inb(int dev, int port) #if defined(CONFIG_IDE_AHB) val = ide_read_register(dev, port); #else - val = inb((ATA_CURR_BASE(dev) + CONFIG_SYS_ATA_PORT_ADDR(port))); + val = inb((ATA_CURR_BASE(dev) + ATA_PORT_ADDR(port))); #endif debug("ide_inb (dev= %d, port= 0x%x) : @ 0x%08lx -> 0x%02x\n", dev, port, - (ATA_CURR_BASE(dev) + CONFIG_SYS_ATA_PORT_ADDR(port)), val); + (ATA_CURR_BASE(dev) + ATA_PORT_ADDR(port)), val); return val; } diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index 664d6d1f34..6b487b310c 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -113,8 +113,6 @@ */ #ifdef CONFIG_IDE #define __io -/* Needs byte-swapping for ATA data register */ -#define CONFIG_IDE_SWAP_IO /* Data, registers and alternate blocks are at the same offset */ #define CONFIG_SYS_ATA_DATA_OFFSET (0x0100) #define CONFIG_SYS_ATA_REG_OFFSET (0x0100) diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h index 58ca6c28b5..1dd83dbf64 100644 --- a/include/configs/r2dplus.h +++ b/include/configs/r2dplus.h @@ -44,7 +44,6 @@ #define CONFIG_SYS_ATA_DATA_OFFSET 0x1000 /* data reg offset */ #define CONFIG_SYS_ATA_REG_OFFSET 0x1000 /* reg offset */ #define CONFIG_SYS_ATA_ALT_OFFSET 0x800 /* alternate register offset */ -#define CONFIG_IDE_SWAP_IO /* * SuperH PCI Bridge Configration diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index d3762165da..207d1ac7af 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -605,7 +605,6 @@ CONFIG_ICACHE CONFIG_ICS307_REFCLK_HZ CONFIG_IDE_PREINIT CONFIG_IDE_RESET -CONFIG_IDE_SWAP_IO CONFIG_IMA CONFIG_IMX CONFIG_IMX6_PWM_PER_CLK @@ -1229,7 +1228,6 @@ CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_ATA_DATA_OFFSET CONFIG_SYS_ATA_IDE0_OFFSET CONFIG_SYS_ATA_IDE1_OFFSET -CONFIG_SYS_ATA_PORT_ADDR CONFIG_SYS_ATA_REG_OFFSET CONFIG_SYS_ATA_STRIDE CONFIG_SYS_ATMEL_CPU_NAME -- 2.39.5