From 7c4f9b37556e8519216c4fd94913c9374d1ab610 Mon Sep 17 00:00:00 2001 From: Ye Li Date: Tue, 29 Sep 2020 21:55:32 -0700 Subject: [PATCH] imx: ddr: imx8m: Move selfref_en after DDR scrub When doing DDR scrub, the DDR may enter into self refresh if the selfref_en is enabled before DDR scrub. This will cause scrub can't complete that SBRSTAT.scrub_done won't be set. Since the selfref_en can be programmed during the course of normal operation, move it after DDR scrub Signed-off-by: Ye Li Acked-by: Peng Fan Signed-off-by: Peng Fan --- drivers/ddr/imx/imx8m/ddr_init.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/ddr/imx/imx8m/ddr_init.c b/drivers/ddr/imx/imx8m/ddr_init.c index 99a67edfb0..b70bcc383f 100644 --- a/drivers/ddr/imx/imx8m/ddr_init.c +++ b/drivers/ddr/imx/imx8m/ddr_init.c @@ -235,8 +235,6 @@ int ddr_init(struct dram_timing_info *dram_timing) /* Step26: Set back register in Step4 to the original values if desired */ reg32_write(DDRC_RFSHCTL3(0), 0x0000000); - /* enable selfref_en by default */ - setbits_le32(DDRC_PWRCTL(0), 0x1); /* enable port 0 */ reg32_write(DDRC_PCTRL_0(0), 0x00000001); @@ -244,6 +242,9 @@ int ddr_init(struct dram_timing_info *dram_timing) board_dram_ecc_scrub(); + /* enable selfref_en by default */ + setbits_le32(DDRC_PWRCTL(0), 0x1); + /* save the dram timing config into memory */ dram_config_save(dram_timing, CONFIG_SAVED_DRAM_TIMING_BASE); -- 2.39.5