From 750a147b3c73217235681aea4b700f9da181e654 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 3 Dec 2018 20:55:01 +0100 Subject: [PATCH] ARM: dts: rmobile: Extract SDHI extras on H3 and M3W ULCB The SDHI nodes are missing features supported in upstream U-Boot, like mode support properties. Pull the extras into U-Boot specific DT until it hits mainline Linux, to make syncing of DTs easier. Signed-off-by: Marek Vasut Cc: Nobuhiro Iwamatsu --- V2: Rebase on u-boot/master --- arch/arm/dts/r8a7795-h3ulcb-u-boot.dts | 21 +++++++++++++++++++++ arch/arm/dts/r8a7796-m3ulcb-u-boot.dts | 21 +++++++++++++++++++++ arch/arm/dts/ulcb.dtsi | 12 +++--------- 3 files changed, 45 insertions(+), 9 deletions(-) diff --git a/arch/arm/dts/r8a7795-h3ulcb-u-boot.dts b/arch/arm/dts/r8a7795-h3ulcb-u-boot.dts index 5cb5e9c6fb..ebbd234d78 100644 --- a/arch/arm/dts/r8a7795-h3ulcb-u-boot.dts +++ b/arch/arm/dts/r8a7795-h3ulcb-u-boot.dts @@ -18,3 +18,24 @@ gpio-sstbz = <&gpio2 3 0>; }; }; + +&sdhi2_pins { + groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds"; + power-source = <1800>; +}; + +&sdhi2_pins_uhs { + groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds"; +}; + +&sdhi0 { + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr104; + max-frequency = <208000000>; +}; + +&sdhi2 { + mmc-hs400-1_8v; + max-frequency = <200000000>; +}; diff --git a/arch/arm/dts/r8a7796-m3ulcb-u-boot.dts b/arch/arm/dts/r8a7796-m3ulcb-u-boot.dts index 78bd4f26bd..4e960081f9 100644 --- a/arch/arm/dts/r8a7796-m3ulcb-u-boot.dts +++ b/arch/arm/dts/r8a7796-m3ulcb-u-boot.dts @@ -18,3 +18,24 @@ gpio-sstbz = <&gpio2 3 0>; }; }; + +&sdhi2_pins { + groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds"; + power-source = <1800>; +}; + +&sdhi2_pins_uhs { + groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds"; +}; + +&sdhi0 { + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr104; + max-frequency = <208000000>; +}; + +&sdhi2 { + mmc-hs400-1_8v; + max-frequency = <200000000>; +}; diff --git a/arch/arm/dts/ulcb.dtsi b/arch/arm/dts/ulcb.dtsi index c805265343..6f814845f8 100644 --- a/arch/arm/dts/ulcb.dtsi +++ b/arch/arm/dts/ulcb.dtsi @@ -299,13 +299,13 @@ }; sdhi2_pins: sd2 { - groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds"; + groups = "sdhi2_data8", "sdhi2_ctrl"; function = "sdhi2"; - power-source = <1800>; + power-source = <3300>; }; sdhi2_pins_uhs: sd2_uhs { - groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds"; + groups = "sdhi2_data8", "sdhi2_ctrl"; function = "sdhi2"; power-source = <1800>; }; @@ -387,12 +387,8 @@ vqmmc-supply = <&vccq_sdhi0>; cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; bus-width = <4>; - sd-uhs-sdr12; - sd-uhs-sdr25; sd-uhs-sdr50; - sd-uhs-sdr104; status = "okay"; - max-frequency = <208000000>; }; &sdhi2 { @@ -405,10 +401,8 @@ vqmmc-supply = <®_1p8v>; bus-width = <8>; mmc-hs200-1_8v; - mmc-hs400-1_8v; non-removable; status = "okay"; - max-frequency = <200000000>; }; &ssi1 { -- 2.39.5