From 6ea118ef9ae123c70cd36cab411d4ef1ea4135e3 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Thu, 5 May 2022 15:43:36 +0800 Subject: [PATCH] imx: imx8mm_edm_sbc: Enable SPL_DM_SERIAL Enable CONFIG_SPL_DM_SERIAL. uart and its pinmux was already marked with u-boot,dm-spl. Move preloader_console_init after spl_early_init to make sure driver model work. Signed-off-by: Peng Fan Reviewed-by: Fabio Estevam --- board/data_modul/imx8mm_edm_sbc/spl.c | 12 ++---------- configs/imx8mm_data_modul_edm_sbc_defconfig | 1 - include/configs/imx8mm_data_modul_edm_sbc.h | 2 -- 3 files changed, 2 insertions(+), 13 deletions(-) diff --git a/board/data_modul/imx8mm_edm_sbc/spl.c b/board/data_modul/imx8mm_edm_sbc/spl.c index 36cad14fc4..f5063eb8c1 100644 --- a/board/data_modul/imx8mm_edm_sbc/spl.c +++ b/board/data_modul/imx8mm_edm_sbc/spl.c @@ -28,14 +28,8 @@ DECLARE_GLOBAL_DATA_PTR; -#define UART_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_FSEL1) #define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE) -static const iomux_v3_cfg_t uart_pads[] = { - IMX8MM_PAD_UART3_RXD_UART3_RX | MUX_PAD_CTRL(UART_PAD_CTRL), - IMX8MM_PAD_UART3_TXD_UART3_TX | MUX_PAD_CTRL(UART_PAD_CTRL), -}; - static const iomux_v3_cfg_t wdog_pads[] = { IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL), }; @@ -47,8 +41,6 @@ static void data_modul_imx8mm_edm_sbc_early_init_f(void) imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads)); set_wdog_reset(wdog); - - imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); } static int data_modul_imx8mm_edm_sbc_board_power_init(void) @@ -149,8 +141,6 @@ void board_init_f(ulong dummy) data_modul_imx8mm_edm_sbc_early_init_f(); - preloader_console_init(); - /* Clear the BSS. */ memset(__bss_start, 0, __bss_end - __bss_start); @@ -160,6 +150,8 @@ void board_init_f(ulong dummy) hang(); } + preloader_console_init(); + ret = uclass_get_device_by_name(UCLASS_CLK, "clock-controller@30380000", &dev); diff --git a/configs/imx8mm_data_modul_edm_sbc_defconfig b/configs/imx8mm_data_modul_edm_sbc_defconfig index edceb18201..5eb99c5d19 100644 --- a/configs/imx8mm_data_modul_edm_sbc_defconfig +++ b/configs/imx8mm_data_modul_edm_sbc_defconfig @@ -200,7 +200,6 @@ CONFIG_DM_RTC=y CONFIG_RTC_M41T62=y CONFIG_CONS_INDEX=2 CONFIG_DM_SERIAL=y -# CONFIG_SPL_DM_SERIAL is not set CONFIG_MXC_UART=y CONFIG_SPI=y CONFIG_DM_SPI=y diff --git a/include/configs/imx8mm_data_modul_edm_sbc.h b/include/configs/imx8mm_data_modul_edm_sbc.h index de56640cd8..67667dd523 100644 --- a/include/configs/imx8mm_data_modul_edm_sbc.h +++ b/include/configs/imx8mm_data_modul_edm_sbc.h @@ -41,8 +41,6 @@ #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0x40000000 /* Minimum 1 GiB DDR */ -#define CONFIG_MXC_UART_BASE UART3_BASE_ADDR - /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 2048 #define CONFIG_SYS_MAXARGS 64 -- 2.39.5