From 57ade0792c2806cb60b6d730860d0df1697b5413 Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Thu, 14 Feb 2019 20:13:53 -0600 Subject: [PATCH] ARM: da8xxevm: Add NAND instructions for da850-evm to README The README.da850 file continues information on how to burn NAND for the LCDK, but not the DA850-EVM. This patch adds both the commands and dip switch instructions for burning and booting NAND. Signed-off-by: Adam Ford --- board/davinci/da8xxevm/README.da850 | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/board/davinci/da8xxevm/README.da850 b/board/davinci/da8xxevm/README.da850 index f24e8b5342..5775b7d80f 100644 --- a/board/davinci/da8xxevm/README.da850 +++ b/board/davinci/da8xxevm/README.da850 @@ -88,6 +88,14 @@ In this case the commands would be simplified to: U-Boot > nand erase.part bootloader U-Boot > nand write 0xc0700000 bootloader +On the DA850-EVM, NAND can also be written with SW7:7-8 ON and + + sudo mono sfh_OMAP-L138.exe -targetType AM1808 -p /dev/ttyUSB0 \ + -flash_noubl -flashType NAND ~/src/u-boot/u-boot.ais + +To boot the DA850-EVM from NAND, SW7:5 should be switched on and all others +off. + Flashing the images to MMC ========================== If the boot pins are set to boot from mmc, the RBL will try to load the -- 2.39.5