From 565681e596381b5b6db59cf06931e698f2d829e5 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 22 Mar 2023 16:59:31 -0300 Subject: [PATCH] imx6sx-udoo-neo-basic: Introduce the u-boot.dtsi After the conversion to DM_SERIAL in commit 01f372d8d62b ("udoo_neo: Select DM_SERIAL and drop iomux board level init") the SPL log is gone and the U-Boot proper log becomes incomplete: Core: 80 devices, 18 uclasses, devicetree: separate MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@2020000 Out: serial@2020000 Err: serial@2020000 Net: eth0: ethernet@2188000 Hit any key to stop autoboot: 0 Introduce the u-boot.dtsi file that passes the u-boot,dm-pre-reloc properties to the relevant nodes so that UART can be used early in SPL. With this change, the complete SPL and U-Boot messages are seen again. Signed-off-by: Fabio Estevam --- arch/arm/dts/imx6sx-udoo-neo-basic-u-boot.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 arch/arm/dts/imx6sx-udoo-neo-basic-u-boot.dtsi diff --git a/arch/arm/dts/imx6sx-udoo-neo-basic-u-boot.dtsi b/arch/arm/dts/imx6sx-udoo-neo-basic-u-boot.dtsi new file mode 100644 index 0000000000..be755e125b --- /dev/null +++ b/arch/arm/dts/imx6sx-udoo-neo-basic-u-boot.dtsi @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0+ + +&soc { + u-boot,dm-pre-reloc; +}; + +&aips1 { + u-boot,dm-pre-reloc; +}; + +&pinctrl_uart1 { + u-boot,dm-pre-reloc; +}; + +&uart1 { + u-boot,dm-pre-reloc; +}; -- 2.39.5