From 546dd667aab029a5831a5eedcd9c1dcb0f4f627d Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Mon, 22 Aug 2022 15:06:03 +0200 Subject: [PATCH] verdin-imx8mm: various config additions and improvements - integrate bootcount using SNVS_LP general purpose register LPGPR0 - enable link-time optimisation - explicitly set a boot delay of one second - enable CRC32 and MD5 - enable command for low-level access to data in a partition - enable time commands - enable PMIC commands - improve ETHPRIME configuration - enable eMMC HS400 functionality - enable fixed PHY and MDIO driver model - remove stale PFUZE100 PMIC driver - enable thermal management unit driver - enable more USB host functionality - enable hexdump Signed-off-by: Marcel Ziswiler --- configs/verdin-imx8mm_defconfig | 36 +++++++++++++++++++++++++++------ 1 file changed, 30 insertions(+), 6 deletions(-) diff --git a/configs/verdin-imx8mm_defconfig b/configs/verdin-imx8mm_defconfig index bbc27253d7..c0db8d9c3e 100644 --- a/configs/verdin-imx8mm_defconfig +++ b/configs/verdin-imx8mm_defconfig @@ -15,10 +15,14 @@ CONFIG_SYS_PROMPT="Verdin iMX8MM # " CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y +CONFIG_BOOTCOUNT_BOOTLIMIT=3 +CONFIG_SYS_BOOTCOUNT_ADDR=0x30370090 CONFIG_SPL=y +CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y CONFIG_SYS_LOAD_ADDR=0x48280000 CONFIG_SYS_MEMTEST_START=0x40000000 CONFIG_SYS_MEMTEST_END=0x80000000 +CONFIG_LTO=y CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_FIT_EXTERNAL_OFFSET=0x3000 @@ -26,7 +30,7 @@ CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_OF_SYSTEM_SETUP=y -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTDELAY=1 CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="test -n ${fdtfile} || setenv fdtfile imx8mm-verdin-${variant}-${fdt_board}.dtb" CONFIG_LOG=y @@ -54,20 +58,26 @@ CONFIG_SYS_PBSIZE=2081 # CONFIG_BOOTM_NETBSD is not set CONFIG_CMD_ASKENV=y # CONFIG_CMD_EXPORTENV is not set -# CONFIG_CMD_CRC32 is not set +CONFIG_CRC32_VERIFY=y +CONFIG_CMD_MD5SUM=y +CONFIG_MD5SUM_VERIFY=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_CLK=y CONFIG_CMD_FUSE=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_READ=y CONFIG_CMD_USB=y +CONFIG_CMD_BOOTCOUNT=y CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y CONFIG_CMD_UUID=y +CONFIG_CMD_PMIC=y CONFIG_CMD_REGULATOR=y CONFIG_CMD_EXT4_WRITE=y # CONFIG_ISO_PARTITION is not set -# CONFIG_EFI_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set CONFIG_OF_CONTROL=y CONFIG_SPL_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y @@ -76,11 +86,13 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SYS_MMC_ENV_PART=1 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="FEC" +CONFIG_ETHPRIME="eth0" CONFIG_VERSION_VARIABLE=y CONFIG_IP_DEFRAG=y CONFIG_TFTP_BLOCKSIZE=4096 CONFIG_SPL_DM=y +CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_SYS_BOOTCOUNT_MAGIC=0xB0C40000 CONFIG_SPL_CLK_COMPOSITE_CCF=y CONFIG_CLK_COMPOSITE_CCF=y CONFIG_SPL_CLK_IMX8MM=y @@ -91,11 +103,21 @@ CONFIG_DM_I2C=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_MMC_IO_VOLTAGE=y +CONFIG_SPL_MMC_IO_VOLTAGE=y +CONFIG_MMC_UHS_SUPPORT=y +CONFIG_SPL_MMC_UHS_SUPPORT=y +CONFIG_MMC_HS400_ES_SUPPORT=y +CONFIG_MMC_HS400_SUPPORT=y +CONFIG_SPL_MMC_HS400_SUPPORT=y CONFIG_FSL_USDHC=y CONFIG_PHYLIB=y CONFIG_PHY_ADDR_ENABLE=y CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ90X1=y +CONFIG_PHY_FIXED=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_FEC_MXC=y CONFIG_MII=y CONFIG_PINCTRL=y @@ -105,7 +127,6 @@ CONFIG_POWER_DOMAIN=y CONFIG_IMX8M_POWER_DOMAIN=y CONFIG_DM_PMIC=y CONFIG_SPL_DM_PMIC_PCA9450=y -CONFIG_DM_PMIC_PFUZE100=y CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y @@ -116,8 +137,11 @@ CONFIG_SPL_SYSRESET=y CONFIG_SYSRESET_PSCI=y CONFIG_SYSRESET_WATCHDOG=y CONFIG_DM_THERMAL=y +CONFIG_IMX_TMU=y CONFIG_USB=y -# CONFIG_SPL_DM_USB is not set CONFIG_USB_EHCI_HCD=y +CONFIG_USB_KEYBOARD=y +CONFIG_USB_HOST_ETHER=y CONFIG_IMX_WATCHDOG=y +CONFIG_HEXDUMP=y CONFIG_OF_LIBFDT_OVERLAY=y -- 2.39.5